New Arrivals

SKU: DF-DFR0994 | Brand: DFRobot

Romeo ESP32-S3 is a high-performance development board specifically designed forrobotics projects. It utilizes the ESP32-S3 microcontroller and is equipped with an onboard camera that enables video transmission and...

SKU: SF-ROB-22132 | Brand: SparkFun

The SparkFun IoT Brushless Motor Driver is a powerful, easy-to-use motor driver that can control any 3-phase BLDC with built-in WiFi and Bluetooth® capabilities! However, with our on-board Three Phase Brushless Gimbal...

SKU: AF-5786 | Brand: Adafruit

The Adafruit Metro RP2040 brings the Raspberry Pi RP2040 dual-core processor to the standard Metro/UNO shield-compatible form factor. With 16 MB of QSPI flash, a microSD card slot, USB-C, and a rich set of debugging p...

SKU: AF-5500 | Brand: Adafruit

The Adafruit Metro ESP32-S3 brings the powerful dual-core ESP32-S3 to the familiar Metro/UNO shield-compatible form factor. With 16 MB flash, 8 MB PSRAM, and 512 KB SRAM, this board has the memory to handle demanding ...

SKU: AF-5709 | Brand: Adafruit

The Adafruit CAN Bus FeatherWing adds CAN bus networking to any Feather board. It uses the MCP2515 CAN controller and TJA1051/3 transceiver to send and receive messages in standard or extended format at up to 1 Mbps o...

SKU: SF-DEV-21247 | Brand: SparkFun

The SparkFun USB-C Host Shield provides all the digital logic and analogue circuitry needed to add USB peripheral/host control to your Arduino. Interface with and control any USB 2.0 compatible device — thumb drives, ...

SKU: DF-DFR0895 | Brand: DFRobot

The ESP32-S3-DevKitC-1 is an entry-level development board built around the ESP32-S3-WROOM-1 module, featuring integrated Wi-Fi and Bluetooth LE connectivity. The Xtensa dual-core LX7 processor provides hardware accel...

SKU: AF-5315 | Brand: Adafruit

An 8-pin SOIC test clip with a DIP breadboard adapter, designed for in-circuit probing and programming of flash memory, EEPROMs, and other 8-SOIC ICs — no soldering or desoldering required. Simply clip onto the chip t...

SKU: WS-21179 | Brand: Waveshare

A compact WiFi development board based on the ESP32-S2 single-core Xtensa LX7 processor, running at up to 240MHz with 2.4GHz WiFi connectivity. Available in multiple variants — with or without an onboard 0.96" IPS LCD...

SKU: DF-DFR0847 | Brand: DFRobot

This 0.96″ 160×80 Colour TFT Display delivers vibrant 16-bit (RGB565) colour output in an ultra-compact form factor. With an edge-to-edge design and a tiny 13.5 × 34 mm footprint, it is well suited for wearable device...

SKU: SF-WRL-17830 | Brand: SparkFun

The ESP32-WROOM-32E is a powerful, generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music stre...

SKU: DF-DFR0813 | Brand: DFRobot

The ESP32-S2-DevKitM-1 is an entry-level development board built around the ESP32-S2-MINI-1 module. It features a single-core Xtensa LX7 processor with Wi-Fi connectivity, 4MB SPI flash, and most I/O pins broken out t...

SKU: SF-LCD-16398 | Brand: SparkFun

The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 20x4 Black on RGB Liquid Crystal Display into your project. We've seriously overhauled the PCB de...

SKU: AF-4677 | Brand: Adafruit

The ESP-PSRAM64H is a 64 Mbit (8 MB) serial pseudo SRAM chip in a compact SOIC-8 package. It provides fast, unlimited read/write external memory for microcontrollers like the ESP32 and Teensy 4.1, which have dedicated...

SKU: DF-DFR0649 | Brand: DFRobot

A 1.54-inch IPS TFT LCD breakout with 240×240 resolution, 16-bit colour (RGB565), and an onboard microSD card slot for storing and displaying images. The ST7789 driver communicates via SPI or DFRobot's GDI interface f...

SKU: SF-SEN-16466 | Brand: SparkFun

A complete environmental sensor breakout based on the Bosch BME680, combining gas sensing (VOC), temperature, humidity, and barometric pressure in a compact 25.4 × 25.4mm (1" × 1") board. The gas sensor detects a wide...

SKU: SF-COM-15809 | Brand: SparkFun

The W25Q32FV (32M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins, and power. This small SMD IC series offers flexibility and performance well beyond ordinary Serial Flash dev...

SKU: AF-3939 | Brand: Adafruit

The Adafruit PyBadge LC is the low-cost version of the PyBadge — a credit-card-sized development board with a colour TFT display, game-style buttons, and a built-in speaker. It runs MakeCode Arcade games, CircuitPytho...

SKU: AF-4084 | Brand: Adafruit

The Adafruit Grand Central M4 Express is a powerful development board built around the Microchip ATSAMD51P20 — a 120 MHz Cortex M4 processor with hardware floating point, 1 MB Flash, and 256 KB RAM. In the familiar Ar...

SKU: AF-326 | Brand: Adafruit

This 0.96" monochrome OLED display packs 128×64 individually controllable white pixels into a compact, highly readable screen. Because OLED pixels produce their own light, no backlight is needed — resulting in excelle...