New Arrivals

SKU: AF-5907 | Brand: Adafruit

The Adafruit Terminal PiCowbell with Pre-Soldered Sockets gives your Raspberry Pi Pico or Pico W instant plug-and-play access to every GPIO pin via screw terminal blocks. Simply plug in your Pico and connect 18–26 AWG...

SKU: AF-5862 | Brand: Adafruit

The Adafruit Grove and STEMMA QT FeatherWing brings Seeed Studio's Grove plug-and-play ecosystem to Adafruit Feather boards. With three analog/digital connectors, one UART connector, two I²C connectors, and a vertical...

SKU: SF-SEN-22956 | Brand: SparkFun

The SparkFun Photoacoustic Spectroscopy CO2 Sensor features the Infineon XENSIV PAS CO2 (PASCO2V01) sensor, which delivers highly accurate CO2 measurements in direct parts-per-million (ppm) format. The photoacoustic s...

SKU: DF-SEN0467 | Brand: DFRobot

This is a sensor that detects hydrogen sulfide concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentra...

SKU: DF-DFR0994 | Brand: DFRobot

Romeo ESP32-S3 is a high-performance development board specifically designed forrobotics projects. It utilizes the ESP32-S3 microcontroller and is equipped with an onboard camera that enables video transmission and...

SKU: SF-DEV-22462 | Brand: SparkFun

The SparkFun DataLogger IoT is a data logger that comes preprogrammed to automatically log GPS and various pressure, humidity, and distance sensors. All without writing a single line of code! The DataLogger automatica...

SKU: SF-ROB-22132 | Brand: SparkFun

The SparkFun IoT Brushless Motor Driver is a powerful, easy-to-use motor driver that can control any 3-phase BLDC with built-in WiFi and Bluetooth® capabilities! However, with our on-board Three Phase Brushless Gimbal...

SKU: SF-SEN-23352 | Brand: SparkFun

QR codes are a great way for users to communicate with microcontrollers, whether it’s passing WiFi credentials to set up connectivity or sending personal information to fill out a digital badge. Reading them from a ma...

SKU: AF-5786 | Brand: Adafruit

The Adafruit Metro RP2040 brings the Raspberry Pi RP2040 dual-core processor to the standard Metro/UNO shield-compatible form factor. With 16 MB of QSPI flash, a microSD card slot, USB-C, and a rich set of debugging p...

SKU: DF-DFR0979 | Brand: DFRobot

The Gravity CH423 I2C 24 Digital IO Expansion Module extends your microcontroller with 24 additional digital output/input pins over a standard I2C connection. Based on the CH423 chip, it provides 8 GPIOs with interrup...

SKU: AF-5663 | Brand: Adafruit

Need to use multiple I2C devices that share the same address? The PCA9546 4-Channel I2C Multiplexer lets you connect up to four same-address I2C devices to a single microcontroller by acting as a gatekeeper — write a ...

SKU: AF-5611 | Brand: Adafruit

The Adafruit PCF8575 GPIO Expander Breakout is an affordable 16-channel I2C GPIO expander that doubles your available digital I/O over a simple two-wire connection. Add extra buttons, LEDs, relays, or other digital pe...

SKU: DF-DFR0895 | Brand: DFRobot

The ESP32-S3-DevKitC-1 is an entry-level development board built around the ESP32-S3-WROOM-1 module, featuring integrated Wi-Fi and Bluetooth LE connectivity. The Xtensa dual-core LX7 processor provides hardware accel...

SKU: DF-SEN0465 | Brand: DFRobot

This is a sensor that detects oxygen concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of ox...

SKU: DF-SEN0470 | Brand: DFRobot

A factory-calibrated electrochemical sulfur dioxide (SO2) sensor with I2C, UART, and analogue output modes. Part of the DFRobot Gravity gas sensor series, this module quickly and accurately measures SO2 concentration ...

SKU: WS-21179 | Brand: Waveshare

A compact WiFi development board based on the ESP32-S2 single-core Xtensa LX7 processor, running at up to 240MHz with 2.4GHz WiFi connectivity. Available in multiple variants — with or without an onboard 0.96" IPS LCD...

SKU: DF-SEN0326 | Brand: DFRobot

The binocular camera module features dual onboard OV2640 cameras, 2MP pixels, 60mm binocular distance, compatible with standard 24P camera. It is suitable for AI vision applications like depth vision and stereo vision...

SKU: DF-KIT0176 | Brand: DFRobot

The Gravity I2C 1 kg Weight Sensor Kit is a complete scale-building kit that includes a load cell, HX711 signal adapter board, acrylic mounting bracket, and all hardware needed to measure weight from 1 g to 1,000 g. T...

SKU: DF-SEN0456 | Brand: DFRobot

This is a Arduino compatible pressure sensor module with a measuring range of 15-700kPa, which supports I2C digital output and can be calibrated according to known pressure values and allows fast and accurate measurem...

SKU: SF-WRL-17830 | Brand: SparkFun

The ESP32-WROOM-32E is a powerful, generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music stre...