New Arrivals

SKU: DF-SEN0590 | Brand: DFRobot

##Introduction This laser distance ranging sensor has a compact size, comparable to the size of a fingernail, and a measurement range of up to 4m. It is specifically designed to address the issues commonly found in di...

SKU: DF-DFR1103 | Brand: DFRobot

##Introduction The Gravity GNSS Positioning & Timing Module integrates satellite positioning functionality and a real-time clock (RTC). The module automatically obtains satellite time based on a preset calibration per...

SKU: AF-6067 | Brand: Adafruit

The Adafruit LPS28 Pressure Sensor Breakout features the ST LPS28DFW — a barometric pressure sensor with an extended range up to 4060 hPa, far beyond the ~1260 hPa limit of most competing sensors. This makes it suitab...

SKU: AF-6062 | Brand: Adafruit

The Adafruit INA3221 breakout monitors current, voltage, and power on up to three independent power rails simultaneously over I2C. Each channel supports high or low-side measurement up to +26V DC at ±3.2A with ±1% pre...

SKU: DF-SEN0617 | Brand: DFRobot

The Gravity BME688 is an advanced MEMS environmental sensor from Bosch that measures temperature, humidity, barometric pressure, and volatile organic compounds (VOC) in a single compact module. It supports both I²C an...

SKU: SF-SEN-24805 | Brand: SparkFun

The SparkFun Qwiic Ultrasonic Distance Sensor, a user-friendly upgrade to the popular HC-SR04 sensor, offers non-contact distance measurement from 2cm to 400cm with an accuracy of 3mm. This sensor is designed to seaml...

SKU: AF-5740 | Brand: Adafruit

This STEMMA QT adapter makes the ANO rotary navigation encoder easy to use over I2C — no GPIO-heavy wiring needed. An on-board microcontroller running Adafruit's seesaw firmware tracks all rotary pulses and button pre...

SKU: AF-4530 | Brand: Adafruit

The Adafruit LPS25 Pressure Sensor Breakout features the ST LPS25HB — an absolute barometric pressure sensor that measures atmospheric pressure from 260 to 1260 hPa. Use it for weather monitoring, altitude estimation,...

SKU: AF-4633 | Brand: Adafruit

The Adafruit LPS22 Pressure Sensor Breakout features the ST LPS22HB — a tiny absolute barometric pressure sensor capable of measuring atmospheric pressure from 260 to 1260 hPa. Use it for weather monitoring, altitude ...

SKU: AF-4414 | Brand: Adafruit

The Adafruit LPS33HW is a water-resistant barometric pressure sensor designed for use in harsh environments. The sensing element is housed in a ceramic package with waterproof gel protection, making it suitable for lo...

SKU: AF-992 | Brand: Adafruit

This pressure sensor from Freescale is a great low-cost sensing solution for measuring barometric pressure. At 1.5 hPa resolution, it's not as precise as our favorite pressure sensor, the BMx280 series, which has u...

SKU: DF-DFR0117 | Brand: DFRobot

Arduino has a small amount of data storage space, The Arduino UNO has 32k. It doesn't have enough space if you want to store a lot of data. Therefore, we need to add an EEPROM Data Storage Module to increase its stora...

SKU: EC-SMI3231DS | Brand: Elecrow

DS3231 is a low-cost, extremely accurate I2C real-time clock (RTC), with an integrated temperature-compensated crystal oscillator (TCXO) and crystal. Compared to the DS1302 solution, the DS3231 has many advantages, it...

SKU: AF-4816 | Brand: Adafruit

The BMP390 from Bosch (also known as BMP390L) is a high-precision barometric pressure and temperature sensor, offering the best altitude accuracy in the Bosch pressure sensor lineup. With relative accuracy of ±3 Pasca...

SKU: DF-DFR0386 | Brand: DFRobot

A real-time clock (RTC) module designed specifically for the Raspberry Pi, built around the Maxim DS1307 chip. It communicates via I2C and includes a CR1220 coin cell battery to maintain accurate timekeeping even when...

SKU: AF-6174 | Brand: Adafruit

The Adafruit Sensirion SHT45 is the highest-accuracy sensor in the SHT4x family, delivering ±1.0% typical relative humidity accuracy and ±0.1 °C typical temperature accuracy. Featuring a PTFE membrane for protection a...

SKU: AF-5989 | Brand: Adafruit

The Adafruit HDC3021 is a high-precision I²C temperature and humidity sensor breakout featuring the TI HDC302x series chip. With typical humidity accuracy of ±0.5% RH (and just 0.19% long-term drift) and temperature a...

SKU: AF-5899 | Brand: Adafruit

The Adafruit ADG728 is a solid-state 1-to-8 analog matrix switch controlled over I2C. Unlike relays, analog switches have no moving parts, won't wear out, and switch in approximately 100 ns. Use it to route up to 8 an...

SKU: AF-5295 | Brand: Adafruit

Add a smooth slide control to any I2C project with the Adafruit NeoSlider — a 75 mm linear slide potentiometer with four RGB NeoPixel underlights, all communicating over I2C via the onboard seesaw microcontroller. No ...