New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
Adafruit Metro RP2040
SKU: AF-5786 | Brand: Adafruit
The Adafruit Metro RP2040 brings the Raspberry Pi RP2040 dual-core processor to the standard Metro/UNO shield-compatible form factor. With 16 MB of QSPI flash, a microSD card slot, USB-C, and a rich set of debugging p...
Delivered by Thu 9 Jul
Cockatoo - Micro:bit simple screw-terminal breakout
SKU: LB-COCKATOO | Brand: Little Bird
The Cockatoo is a simple screw-terminal breakout board for the BBC micro:bit. Slide your micro:bit into the edge connector and you get secure screw terminal access to pins 0, 1, 2, 3.3V, and GND — no soldering or croc...
Delivered by Fri 19 Jun
Adafruit PCF8575 I2C 16 GPIO Expander Breakout
SKU: AF-5611 | Brand: Adafruit
The Adafruit PCF8575 GPIO Expander Breakout is an affordable 16-channel I2C GPIO expander that doubles your available digital I/O over a simple two-wire connection. Add extra buttons, LEDs, relays, or other digital pe...
Delivered by Thu 9 Jul
ESP32-S3-DevKitC-1 Development Board
SKU: DF-DFR0895 | Brand: DFRobot
The ESP32-S3-DevKitC-1 is an entry-level development board built around the ESP32-S3-WROOM-1 module, featuring integrated Wi-Fi and Bluetooth LE connectivity. The Xtensa dual-core LX7 processor provides hardware accel...
Delivered by Tue 30 Jun
WAVEGO, 12-DOF Bionic Dog-Like Robot, Open Source for ESP32 And PI4B, Facial Recognition, Color Tracking, Motion Detection
SKU: WS-21743 | Brand: Waveshare
WAVEGO, 12-DOF bionic dog-like robot, open source for ESP32 and PI4B, facial recognition, color tracking, motion detectionHigh-DOF bionic quadruped robotPowered by ESP32 sub controller & Raspberry Pi 4B host controlle...
Delivered by Fri 10 Jul
ESP32-S2 MCU WiFi Development Board, 240MHz, 2.4 GHz WiFi, with LCD / Pinheader
SKU: WS-21179 | Brand: Waveshare
A compact WiFi development board based on the ESP32-S2 single-core Xtensa LX7 processor, running at up to 240MHz with 2.4GHz WiFi connectivity. Available in multiple variants — with or without an onboard 0.96" IPS LCD...
Delivered by Fri 19 Jun
Waterproof SMD DS18B20 Digital Temperature Sensor
SKU: DF-SEN0511 | Brand: DFRobot
This waterproof DS18B20 digital temperature sensor delivers accurate readings over a simple 1-Wire interface, requiring just a single data pin on your microcontroller. The sealed probe and silicone lead wire make it i...
Delivered by Tue 30 Jun
NPN to PNP Signal Converter / Adapter Module
SKU: DF-FIT0850 | Brand: DFRobot
This NPN to PNP signal converter module bridges the gap when your sensor outputs an NPN signal but your controller or PLC expects a PNP input. Simply wire it inline between the sensor and the controller to convert the...
Delivered by Tue 30 Jun
4-Channel Level Converter (12V to 5V)
SKU: DF-DFR0914 | Brand: DFRobot
This DFRobot 4-channel optocoupler-isolated level converter translates 12V signals down to 5V, making it easy to interface industrial sensors and PLC outputs with Arduino and other 5V microcontrollers. Each channel fe...
Delivered by Tue 30 Jun
ESP32-S2-DevKitM-1 Development Board
SKU: DF-DFR0813 | Brand: DFRobot
The ESP32-S2-DevKitM-1 is an entry-level development board built around the ESP32-S2-MINI-1 module. It features a single-core Xtensa LX7 processor with Wi-Fi connectivity, 4MB SPI flash, and most I/O pins broken out t...
Delivered by Tue 30 Jun
Adafruit AW9523 GPIO Expander and LED Driver Breakout - STEMMA QT / Qwiic
SKU: AF-4886 | Brand: Adafruit
The Adafruit AW9523 GPIO Expander and LED Driver Breakout adds 16 I/O pins to any I2C-capable microcontroller or single-board computer. What sets this expander apart is its built-in 256-step linear constant-current LE...
Delivered by Thu 9 Jul
Environment Science Expansion Board V2.0 for micro:bit
SKU: DF-MBT0034 | Brand: DFRobot
The Environment Science Expansion Board V2.0 is a micro:bit add-on designed for STEAM education, integrating 14 environmental sensors and modules onto a single tree-shaped board. Students can measure UV levels, temper...
Delivered by Tue 30 Jun
4 Channels IR Reflective Sensor
SKU: EC-SPS40201S | Brand: Elecrow
This Elecrow 4-channel IR reflective sensor module combines four infrared emitter/receiver pairs with a mainboard that processes all signals. When an object enters the detection range, the corresponding channel output...
Delivered by Fri 19 Jun
micro:bit Edge Connector - PTH, Right Angle (80-pin)
SKU: SF-PRT-17252 | Brand: SparkFun
The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 80, right angle, PTH pins. Add this part to your board to create a handy...
Delivered by Fri 19 Jun
SparkFun Qwiic GPIO
SKU: SF-DEV-17047 | Brand: SparkFun
The SparkFun Qwiic GPIO adds eight additional digital I/O pins to your project via I2C, based on the TCA9534 I/O Expander from Texas Instruments. Read and write pins just like standard Arduino digital pins using the i...
Delivered by Fri 19 Jun
Rotary Encoder - Illuminated (RGB)
SKU: SF-COM-15141 | Brand: SparkFun
Rotary encoders can be used similarly to potentiometers. The difference being that an encoder has full rotation without limits (It just goes round and round). They output gray code so that you can tell how much and in...
Delivered by Tue 30 Jun
SparkFun ESP32 Thing Plus DMX to LED Shield
SKU: SF-DEV-15110 | Brand: SparkFun
The SparkFun ESP32 Thing Plus DMX to LED Shield enables sending and receiving DMX data via an on-board XLR-3 jack or over ArtNet. Designed for developing custom DMX fixtures or adding ArtNet capabilities to existing s...
Delivered by Tue 30 Jun
SparkFun Motor Driver - Dual TB6612FNG (1A)
SKU: SF-ROB-14451 | Brand: SparkFun
The SparkFun TB6612FNG Motor Driver breakout can independently control up to two DC motors at a constant current of 1.2 A (3.2 A peak). Each motor channel supports four modes — clockwise, counter-clockwise, short-brak...
Delivered by Tue 30 Jun
SparkFun Capacitive Touch Breakout - AT42QT1011
SKU: SF-SEN-14520 | Brand: SparkFun
The SparkFun Capacitive Touch Breakout provides a single momentary touch button using the AT42QT1011 capacitive sense chip. Simply supply 1.8–5 V and ground — the chip handles all touch monitoring and outputs a digita...
Delivered by Tue 30 Jun
Gravity:Digital Piranha LED Module - Green
SKU: DF-DFR0031-G | Brand: DFRobot
This is a Piranha LED light module. A digital pin (LOW on, HIGH off) is used to control it. The brightness of LED can be controller via PWM output. APPLICATIONS DIY Projects Toys Games Audio indicator SPECIFICATIONS...
Delivered by Fri 19 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
