New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
PIR Motion Sensor (JST)
SKU: SF-SEN-13285 | Brand: SparkFun
This is a simple to use motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. If anything moves after that period, the ‘alarm’ pin will go low.This unit works great from 5...
Delivered by Fri 19 Jun
SparkFun RGB LED Breakout - WS2812B
SKU: SF-BOB-13282 | Brand: SparkFun
This is a breakout board for the WS2812B RGB LED. The WS2812B is actually an RGB LED with a WS2811 built right into the LED! All the necessary pins are broken out to 0.1" spaced headers for easy bread-boarding. Severa...
Delivered by Fri 19 Jun
Graphic Equalizer Display Filter - MSGEQ7
SKU: SF-COM-10468 | Brand: SparkFun
The MSGEQ7 is a CMOS graphic equaliser IC that divides the audio spectrum into seven frequency bands: 63 Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.25 kHz, and 16 kHz. Each band is peak-detected and multiplexed to provide ...
Delivered by Fri 19 Jun
SparkFun Line Sensor Breakout - QRE1113 (Digital)
SKU: SF-ROB-09454 | Brand: SparkFun
The SparkFun QRE1113 Line Sensor Breakout (Digital) is a compact IR reflectance sensor board that outputs a digital signal based on surface reflectivity. It uses a capacitor discharge circuit — the faster the 10 nF ca...
Delivered by Fri 19 Jun
Kitronik Compact Motor Driver Board for the BBC micro:bit
SKU: KI-5698 | Brand: Kitronik
A compact motor driver board for the BBC micro:bit that drives two DC motors or one stepper motor. The integrated edge connector lets the micro:bit slot in directly, with built-in protection against short circuits, ov...
Delivered by Fri 19 Jun
All-in-one Starter Kit for ESP32-P4 with Common Board design, 16 Modules and AI Lessons
SKU: EC-SEE00804D | Brand: Elecrow
The All-in-one Starter Kit for ESP32-P4 is a complete learning platform built around Espressif's ESP32-P4, a high-performance 32-bit RISC-V dual-core microprocessor with powerful image and voice processing capabilitie...
Delivered by Fri 19 Jun
Air Quality and Environmental Control HAT for Raspberry Pi
SKU: KI-5038 | Brand: Kitronik
The Kitronik Air Quality Control HAT for Raspberry Pi lets you monitor, log, and react to environmental data using the BME688 sensor. It measures temperature, pressure, humidity, air quality index, and eCO2, with an o...
Delivered by Fri 19 Jun
Pololu Dual G2 High-Power Motor Driver 24v14 for Raspberry Pi (Assembled)
SKU: PL-3753 | Brand: Pololu
The Pololu Dual G2 High-Power Motor Driver 24v14 is a Raspberry Pi expansion board that can independently control two brushed DC motors at up to 14A continuous per channel. It mounts directly onto the Pi's 40-pin GPIO...
Delivered by Fri 19 Jun
Kitronik Compact All-In-One Robotics Board for BBC micro:bit
SKU: KI-5693 | Brand: Kitronik
With the Kitronik Compact Robotics Board, the BBC micro:bit can be used to drive 4 motors (or 2 stepper motors) and 8 servos. Coupled with 17 other I/O expansion points, this means the BBC micro:bit can very easily be...
Delivered by Fri 19 Jun
RP2040 Microcontroller - Bulk 500
SKU: RP-RP2040-500 | Brand: Raspberry Pi Ltd
The RP2040 is Raspberry Pi's dual-core Arm Cortex-M0+ microcontroller in a compact 7mm × 7mm QFN-56 package. Built on 40nm silicon, it delivers high performance for integer workloads with flexible I/O for connecting t...
Delivered by Fri 19 Jun
Cockatoo v2 - Micro:bit simple lighting breakout
SKU: LB-COCKATOO-V2 | Brand: Little Bird
The Cockatoo v2 is a simple breakout board for the BBC micro:bit, designed for school projects involving basic lighting circuits. Slide the micro:bit into the edge connector and access three pins — Pin 2, 3.3 V, and G...
Delivered by Fri 19 Jun
TinyPICO V3 USB-C with u.FL by Unexpected Maker
SKU: AF-5750 | Brand: Adafruit
TinyPICO is the world’s smallest, fully-featured ESP32 development board, designed to unlock the power of the ESP32’s dual-core 240MHz and internet connectivity, in a package smaller than your thumb! Please note: Thi...
Delivered by Fri 19 Jun
FeatherS2 Neo - Blingy RGB ESP32-S2 Feather Development Board
SKU: AF-5629 | Brand: Adafruit
Introducing the FeatherS2 Neo - The full-featured ESP32-S2-based development board in a Feather format from Unexpected Maker. The FeatherS2 Neo is a powerhouse, fully souped up with 4 MB of Flash memory (for firmware ...
Delivered by Fri 19 Jun
PiCube: 4x4x4 LED Cube Unassembled Red
SKU: SB-PICUBE-RED | Brand: Little Bird
PiCube is a 4x4x4 LED cube HAT for Raspberry Pi with 5V DC operating voltage. PiCube, a monochromatic( Red, Blue, Green) LED with 64, is the latest product in the range of technologically advanced devices of SB Compo...
Delivered by Fri 19 Jun
Arduino Compatible Base Board For Raspberry Pi Compute Module 4, HDMI, USB, M.2 Slot
SKU: WS-21738 | Brand: Waveshare
The CM4-Duino is an Arduino-compatible base board for the Raspberry Pi Compute Module 4. It breaks out the CM4's key interfaces — HDMI, USB, M.2 NVMe, camera, and GPIO — in a compact form factor with Arduino-style pin...
Delivered by Fri 19 Jun
SparkFun MicroMod ESP32 Processor
SKU: SF-WRL-16781 | Brand: SparkFun
The SparkFun MicroMod ESP32 Processor Board brings Espressif's ESP32 into the MicroMod ecosystem via the M.2 connector interface. It provides WiFi and Bluetooth connectivity with the processing power of a dual-core Te...
Delivered by Fri 19 Jun
mbed Application Board
SKU: AF-1323 | Brand: Adafruit
Turbo-charge your mbed LPC1769 dev board with this compact but feature-full application board. Fully assembled, just plug in your mbed and you will be ready to rock.Featuring: 128x32 Graphics LCD 5 way joystick 2 ...
Delivered by Fri 19 Jun
Pi Zero ENC28j60 Network Adapter Module for Raspberry Pi Zero
SKU: LB-LS0826 | Brand: Little Bird
A compact Ethernet network adapter module for the Raspberry Pi Zero and Zero W, based on the ENC28J60 controller. It plugs directly onto the Pi Zero's GPIO header and provides a wired network connection for system upd...
Delivered by Fri 19 Jun
8 Channel 3.3V To 5V Voltage Convert Module For Raspberry Pi
SKU: LB-00255 | Brand: Little Bird
An 8-channel voltage level converter module for shifting between 3.3V and 5V logic levels. Designed for use with Raspberry Pi, making it easy to interface with 5V sensors and modules from the Pi's 3.3V GPIO pins. Key...
Delivered by Fri 19 Jun
Ultra Sonic range measurement module
SKU: SS-101990004 | Brand: Seeed Studio
This is a non-contact distance measurement module, which is also compatible with electronic brick. It’s designed for easy modular project usage with industrial performance. Features Detecting range: 3cm-4...
Delivered by Fri 19 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
