New Arrivals

SKU: DF-SEN0275 | Brand: DFRobot

The MB1040 LV-MaxSonar-EZ4 is a compact ultrasonic range sensor from MaxBotix that provides distance measurements from 15 cm to 645 cm (6" to 254") with 2.5 cm (1") resolution. It features the narrowest beam width of ...

SKU: SS-101990004 | Brand: Seeed Studio

This  is a non-contact distance measurement module, which is also compatible with electronic brick. It’s designed for easy modular project usage with industrial performance. Features Detecting range: 3cm-4...

SKU: SF-BOB-11040 | Brand: SparkFun

The SparkFun LED RingCoder Breakout provides a visual position indicator for rotary encoders. Two 8-bit shift registers drive a circular LED bargraph that displays the virtual position of the encoder as it turns, givi...

SKU: DF-SEN0006 | Brand: DFRobot

The latest model SRF05 Detection range of 3 cm from the original SRF04 -3 m, increased to 1 cm -4 meters. RF04 is compatible with the original. Also has smaller side lobes. Ultrasonic module can be used to identi...

SKU: DF-DFR0489 | Brand: DFRobot

DFRobot FireBeetle is a series of low-power-consumption development hardware designed for Internet of Things (IoT). Firebeetle ESP8266 is a development board integrated with IoT WiFi, TCP/IP, 32-bit MCU, 10-bit ADC an...

SKU: PL-2481 | Brand: Pololu

The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB along with an Omron G5L...

SKU: SF-BOB-09322 | Brand: SparkFun

A simple breakout PCB for the GP1A57HR photo interrupter (also known as a photogate, photodiode, or phototransistor). This PCB has three connections for PWR, GND, and Signal.When the gate is clear, SIG will be high (>...

SKU: DF-KIT0020 | Brand: DFRobot

An Ultrasonic sensor with scan capability is a must have feature for most robot application. This Ultrasonic scanner kit provides a cost effective way to have such feature for your robot application. This kit is...

SKU: SF-SEN-14032 | Brand: SparkFun

It’s back! This is the LIDAR-Lite v3, a compact, high-performance optical distance measurement sensor from Garmin™. When space and weight requirements are tight, the LIDAR-Lite v3 soars. The LIDAR-Lite v3 is the ideal...

SKU: AF-3182 | Brand: Adafruit

The Pimoroni Mini Black HAT Hack3r breaks out all 40 GPIO pins from your Raspberry Pi while still allowing a HAT or pHAT to sit on top. Connect via the included ribbon cable and access every pin — labelled with functi...

SKU: SF-COM-11102 | Brand: SparkFun

This 1024 pulse per rotation rotary encoder outputs gray code which you can interpret using a microcontroller and find out which direction the shaft is turning and by how much. This allows you to add feedback to motor...

SKU: PL-3101 | Brand: Pololu

The Pololu A-Star 32U4 Micro is a general-purpose programmable module based on the ATmega32U4 AVR microcontroller from Microchip. It packs 32 KB of flash, 2.5 KB of RAM, and built-in USB into a tiny 1″ × 0.6″ DIP pack...

SKU: DF-SEN0192 | Brand: DFRobot

INTRODUCTION The microwave sensor applies the Doppler effect to detect moving objects using microwaves. This differs from the method used by a regular infrared (IR) sensor as microwave is...

SKU: SF-SEN-12617 | Brand: SparkFun

Knowing where your robot is can be very important! The RedBot Wheel Encoder allows you to track the number of revolutions each wheel has made. This sensor works by detecting the movement of small teeth connected to a ...

SKU: PR-PIM269 | Brand: Little Bird

Add a tiny yet convenient power switch to your Pi with OnOff SHIM! Our SHIMs (Shove Hardware in the Middle) are a new range of boards designed to be small, affordable, and handy. They're just 0.8mm thick (the bare ...

SKU: SF-DEV-17493 | Brand: SparkFun

The A0 in the latest in Macchina's line of OBD-II interfaces. The A0 uses the power of the ESP32 BLE and WiFi module to allow for wireless access to the OBD-II port most modern cars have.The Macchina A0 module plugs d...

SKU: DF-SEN0523 | Brand: DFRobot

This IR break-beam photoelectric switch detects objects by sending an invisible infrared beam from an emitter to a receiver. When a non-transparent object passes between the two and breaks the beam, the receiver outpu...

SKU: DF-KIT0157 | Brand: DFRobot

The Maixduino AI Development Kit combines the Kendryte K210 RISC-V dual-core AI processor with an ESP32 module for Wi-Fi and Bluetooth connectivity, all in an Arduino UNO-compatible form factor. The K210 features a bu...

SKU: EC-SPM01021S | Brand: Elecrow

This water sensor works by having a series of exposed traces connected to ground and interlaced between the grounded traces are the sens traces. The sensor board has a demension of 5.0 x 4.0cm. There is also a on-boar...

SKU: PR-PIM277 | Brand: Little Bird

Add a tiny yet convenient power switch to your Pi with OnOff SHIM! Our SHIMs (Shove Hardware in the Middle) are a new range of boards designed to be small, affordable, and handy. They're just 0.8mm thick (the bare boa...