New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
Temperature and Humidity Sensor Module KY-028
SKU: LB-LR0010 | Brand: Little Bird
Digital TempTemperature sensing module using an NTC thermistor. The output signal at ‘DO’ switches high when the preset (adjustable) temperature is reached. An analog output signal from the sensor is availab...
Delivered by Mon 22 Jun
Adafruit Animated Eyes Bonnet for Raspberry Pi Pack - Pi not included
SKU: AF-3813 | Brand: Adafruit
This complete pack includes everything you need to build animated eyes with a Raspberry Pi (not included). The Adafruit Snake Eyes Bonnet drives two high-density 1.54" TFT displays at 240×240 resolution with IPS wide-...
Delivered by Fri 10 Jul
Pi-DigiAMP+
SKU: PI-IQA002 | Brand: Pimoroni
The IQaudIO Pi-DigiAMP+ is a HAT-compliant DAC and amplifier board for the Raspberry Pi, combining a high-quality 24-bit/192 kHz DAC with a 2×20W Class D stereo amplifier on a single board. Based on the Texas Instrume...
Delivered by Mon 22 Jun
INA169 Analog DC Current Sensor Breakout - 60V 5A Max
SKU: AF-1164 | Brand: Adafruit
This breakout board will solve all your current-monitoring problems. Instead of struggling with a multimeter, you can just use the handy INA169 chip on this breakout to both measure both the DC current draw and have a...
Delivered by Fri 10 Jul
AMP:BIT class D amplifier for micro:bit with headphone jack
SKU: PI-PPMB00130 | Brand: Pimoroni
The Amp:bit is the easiest way to connect a speaker or headphones to your BBC micro:bit. It plugs directly onto the edge connector and provides a 3.5mm headphone jack, solder pads for a speaker, and a volume control w...
Delivered by Mon 22 Jun
Adafruit Feather 32u4 Bluefruit LE with Headers - Assembled
SKU: AF-3379 | Brand: Adafruit
The Feather 32u4 Bluefruit LE with Headers combines an ATmega32u4 microcontroller with a Bluetooth Low Energy module, USB connectivity, and LiPo battery charging — with standard headers pre-soldered so you can plug st...
Delivered by Mon 22 Jun
Thermistor NTC 5MMDIA 100KR
SKU: TB-RN3444 | Brand: Little Bird
A 100 kΩ NTC (Negative Temperature Coefficient) thermistor in a radial dipped-epoxy package. These ceramic sensors change resistance rapidly with temperature, making them ideal for temperature measurement, compensatio...
Delivered by Mon 22 Jun
VS1053 Codec + MicroSD Breakout - MP3/WAV/MIDI/OGG Play + Record [v4]
SKU: AF-1381 | Brand: Adafruit
This breakout board is the ultimate companion for the VLSI VS1053B DSP codec chip. The VS1053 can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). It can al...
Delivered by Mon 22 Jun
Gravity: Analog Sound Level Meter
SKU: DF-SEN0232 | Brand: DFRobot
The Gravity Analog Sound Level Meter is an Arduino-compatible decibel meter that accurately measures environmental noise levels. It uses an instrumentation-grade circuit with a low-noise microphone for high-precision ...
Delivered by Wed 1 Jul
Adafruit Gemma Sensor Starter Pack
SKU: AF-1849 | Brand: Adafruit
Get started with wearable electronics using the Adafruit Gemma Sensor Starter Pack. This all-in-one kit includes a GEMMA V2 board, sewable RGB NeoPixels, multiple sensors, a rechargeable battery with charger, and ever...
Delivered by Fri 10 Jul
Arduino Pro Mini 328 - 5V/16 MHz
SKU: AF-2378 | Brand: Adafruit
The Arduino Pro Mini is SparkFun's minimal design approach to Arduino. It's essentially a 5v Arduino that runs an 16 MHz bootloader on a super small, super thin board. There are no connectors attached -...
Delivered by Mon 22 Jun
3W-9W RGB LED - Common Anode
SKU: AF-2524 | Brand: Adafruit
This high-power RGB LED from Adafruit delivers serious brightness, with each red, green, and blue die capable of handling 350–750mA continuous current (2A peak). At 3W it produces approximately 150 lumens, scaling up ...
Delivered by Fri 10 Jul
Audio Analyzer Module
SKU: DF-DFR0126 | Brand: DFRobot
This Audio Analyzer module features the MSGEQ7 graphic equalizer display filter.It will give your arduino ears. Sound is broken down into seven frequency bands and the peak level for each band can be read. The seven ...
Delivered by Mon 22 Jun
Vishay TSSP58P38 IR Detector Module, 38kHz, Automatic Gain (3-Pack)
SKU: PL-2463 | Brand: Pololu
The Vishay TSSP58P38 is a unique modulated IR receiver that is designed for IR brightness detection instead of data communication for remote control. This sensor can be used with a 38 kHz modulated IR emitter an...
Delivered by Mon 22 Jun
Piezo Vibration Sensor - Small Horizontal
SKU: SF-SEN-09198 | Brand: SparkFun
The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and ‘tap’ inputs from a user....
Delivered by Wed 1 Jul
Piezo Vibration Sensor - Large with Mass
SKU: SF-SEN-09197 | Brand: SparkFun
A flexible piezo vibration sensor from Measurement Specialties, commonly used for detecting flex, touch, vibration, and shock. The PVDF polymer film generates a small AC voltage (up to ±90 V) when it moves, which can ...
Delivered by Wed 1 Jul
SparkFun Thumb Joystick Breakout
SKU: SF-BOB-09110 | Brand: SparkFun
This is the breakout board for the thumb joystick. Pins are broken out to a 0.1" header and includes 4 mounting holes in the corners.
Delivered by Mon 22 Jun
Adafruit Feather 32u4 Basic Proto
SKU: AF-2771 | Brand: Adafruit
The Feather 32u4 Basic Proto is the no-frills member of the Feather 32u4 family, with a built-in prototyping area where you can solder on extra components like buttons, sensors, or connectors without needing a separat...
Delivered by Mon 22 Jun
K Type Thermocouple
SKU: DF-SEN0139 | Brand: DFRobot
This is a K type Thermocouple (Temperature sensor) which is very popular for 3D printers such as Ultimaker and Makerbot. You can hardly damage them or mishandle them. You just need an additional IC (Like an AD595) ...
Delivered by Wed 1 Jul
LilyPad Temperature Sensor
SKU: SF-DEV-08777 | Brand: SparkFun
Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C. Doing an analog to dig...
Delivered by Wed 1 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
