New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
XBee 2mW Wire Antenna - Series 2 (ZB)
SKU: DF-TEL0020 | Brand: DFRobot
This is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. Th...
Delivered by Tue 3 Nov
Adafruit Bluefruit LE SPI Friend - Bluetooth Low Energy (BLE)
SKU: AF-2633 | Brand: Adafruit
The Adafruit Bluefruit LE SPI Friend adds Bluetooth Low Energy connectivity to any microcontroller with just 4–5 GPIO pins. Using SPI instead of UART means no baud rate configuration or flow control to worry about — c...
Delivered by Mon 16 Nov
QTR-L-1A Reflectance Sensor (2-Pack)
SKU: PL-2454 | Brand: Pololu
The QTR-L-1A reflectance sensor incorporates a right-angle infrared LED and a right-angle phototransistor in an inexpensive, tiny 0.35″ × 0.3″ module that can be mounted almost anywhere and is great for e...
Delivered by Fri 23 Oct
SparkFun Photo Interrupter Breakout Board - GP1A57HRJ00F
SKU: SF-BOB-09322 | Brand: SparkFun
A simple breakout PCB for the GP1A57HR photo interrupter (also known as a photogate, photodiode, or phototransistor). This PCB has three connections for PWR, GND, and Signal.When the gate is clear, SIG will be high (>...
Delivered by Tue 3 Nov
Gravity: Arduino Propane Gas Sensor (MQ6)
SKU: DF-SEN0131 | Brand: DFRobot
INTRODUCTION This is an Arduino Propane Gas Sensor. It uses MQ6 probe to detect iso-butane, propane and liquefied petroleum gas (LPG). It is less sensitive with alcohol, cooking fumes an...
Delivered by Tue 3 Nov
Carbon Monoxide Flammable Gas Sensor MQ-9
SKU: PL-1483 | Brand: Pololu
This semiconductor gas sensor detects the presence of Carbon Monoxide at concentrations from 10 to 1,000 ppm and combustible gas from 100 to 10,000 ppm. The sensor’s simple analog voltage interface requires ...
Delivered by Fri 23 Oct
10 DOF Mems IMU Sensor (Arduino Compatible)
SKU: DF-SEN0140 | Brand: DFRobot
The DFRobot 10 DOF MEMS IMU Sensor combines four sensors on a single compact board — the ADXL345 accelerometer, ITG-3205 gyroscope, HMC5883L magnetometer, and BMP085 barometric pressure sensor. Together they provide 1...
Delivered by Tue 3 Nov
One-Wire Ambient Temperature Sensor - MAX31820
SKU: SF-SEN-14049 | Brand: SparkFun
The MAX31820 ambient temperature sensor provides 9-bit to 12-bit Celsius temperature measurements with ±0.5°C accuracy over a +10°C to +45°C temperature range. Over its entire -55°C to +125°C operating range, the devi...
Delivered by Tue 3 Nov
Ambient Light Sensor - TEMT6000x01
SKU: SF-COM-08348 | Brand: SparkFun
The TEMT6000x01 is a compact ambient light sensor that operates as an NPN phototransistor. The more light that hits the sensor, the stronger the base bias, producing an analog output proportional to the ambient light ...
Delivered by Fri 23 Oct
SparkFun Capacitive Touch Breakout - AT42QT1010
SKU: SF-SEN-12041 | Brand: SparkFun
If you need to add user input without using a button, then a capacitive touch interface might be the answer. The AT42QT1010 SparkFun Capacitive Touch Breakout offers a single capacitive touch button with easy-to-use d...
Delivered by Tue 3 Nov
SparkFun Current Sensor Breakout - INA169
SKU: SF-SEN-12040 | Brand: SparkFun
The INA169 is a “high-side current monitor,” which means that you place a resistor (a “shunt resistor”) on the positive power rail and the INA169 measures the voltage drop across that resistor. The INA169 outputs a sm...
Delivered by Tue 3 Nov
Breakout Board for XBee Module
SKU: SF-BOB-08276 | Brand: SparkFun
This is a simple breakout board for the popular XBee product from Digi. This board breaks out all 20 pins of the XBee to a 0.1" standard spacing dual row header. The spacing between 0.1" headers is 0.5" making it b...
Delivered by Tue 3 Nov
Adafruit ATWINC1500 WiFi Breakout
SKU: AF-2999 | Brand: Adafruit
The Adafruit ATWINC1500 WiFi Breakout adds 802.11b/g/n WiFi connectivity to your Arduino or other microcontroller project over SPI. Built around the Microchip ATWINC1500 module, this FCC-certified breakout delivers re...
Delivered by Mon 16 Nov
The Laser Photoelectric Switch GAB100M-AK-5V
SKU: DF-FIT0319 | Brand: DFRobot
This is a photoelectric switch that is composed of emitter and receptor.The emitter consists of a laser diode,and the laser has the characteristics of high precision, good orientation etc.The receptor consists of a p...
Delivered by Tue 3 Nov
SparkFun Triple Axis Accelerometer Breakout - LIS3DH
SKU: SF-SEN-13963 | Brand: SparkFun
The SparkFun LIS3DH breakout is a low-power, three-axis accelerometer with 12-bit resolution, ideal for adding motion and orientation detection to your projects. It communicates over I2C or SPI and includes three addi...
Delivered by Tue 3 Nov
MinIMU-9 v2 Gyro, Accelerometer, and Compass
SKU: PL-1268 | Brand: Pololu
The Pololu MinIMU-9 v2 is a compact (0.8″ × 0.5″) board that combines ST’s L3GD20 3-axis gyroscope and LSM303DLHC 3-axis accelerometer and 3-axis magnetometer to form an inertial measurement unit (IMU); we therefore r...
Delivered by Fri 23 Oct
MinIMU-9 Gyro, Accelerometer, and Compass
SKU: PL-1265 | Brand: Pololu
This board has been replaced by the newer MinIMU-9 v2 L3GD20 and LSM303DLHC carrier, which offers improved magnetic sensing resolution, a wider acceleration measurement range, and gyro measurements that are more resis...
Delivered by Fri 23 Oct
RFID Reader ID-3LA (125 kHz)
SKU: SF-SEN-11862 | Brand: SparkFun
RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-3LA, a very simple...
Delivered by Tue 3 Nov
SparkFun Infrared Temperature Breakout - TMP006
SKU: SF-SEN-11859 | Brand: SparkFun
This is not your typical temperature sensor. The TMP006 Breakout can measure the temperature of an object without making contact with it. By using a thermopile to detect and absorb the infrared energy an object is emi...
Delivered by Fri 23 Oct
RGB LED Satellite Module 004 (Circle)
SKU: PL-1245 | Brand: Pololu
The Satellite Module 003 is an RGB LED round “pixel” with three bright surface-mount RGB LEDs. This LED module is designed to be used with the OctoBrite DEFILIPPI to easily integrate full-color LED lighting into your...
Delivered by Fri 23 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
