New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
Circuit Playground TFT Gizmo - Bolt-on Display + Audio Amplifier
SKU: AF-4367 | Brand: Adafruit
The TFT Gizmo adds a vibrant 1.54" colour display and audio output to your Circuit Playground board. It bolts directly onto the back of your Circuit Playground using M3 standoffs that provide both mechanical support a...
Delivered by Wed 15 Jul
Adafruit PDM Microphone Breakout with JST SH Connector
SKU: AF-4346 | Brand: Adafruit
The Adafruit PDM Microphone Breakout with JST SH Connector provides a digital audio input using Pulse Density Modulation (PDM) in a compact, cable-ready form factor. The 4-pin JST SH connector (3V, GND, DAT, CLK) pair...
Delivered by Wed 15 Jul
LV-MaxSonar-EZ4(MB1040)
SKU: DF-SEN0275 | Brand: DFRobot
The MB1040 LV-MaxSonar-EZ4 is a compact ultrasonic range sensor from MaxBotix that provides distance measurements from 15 cm to 645 cm (6" to 254") with 2.5 cm (1") resolution. It features the narrowest beam width of ...
Delivered by Mon 6 Jul
SparkFun Buck-Boost Converter
SKU: SF-COM-15208 | Brand: SparkFun
The SparkFun Buck-Boost Converter is a handy power accessory board that allows you to fine tune the amount of power your project receives. This converter can take an input voltage of anywhere from 3-16V which can then...
Delivered by Mon 6 Jul
Adafruit AirLift – ESP32 WiFi Co-Processor Breakout Board
SKU: AF-4201 | Brand: Adafruit
Give any microcontroller WiFi connectivity with the Adafruit AirLift Breakout. This board uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main...
Delivered by Wed 15 Jul
Adafruit eInk Breakout Friend with 32KB SRAM
SKU: AF-4224 | Brand: Adafruit
The Adafruit eInk Breakout Friend is a driver board for eInk/e-paper displays with a standard 24-pin FPC connector. It includes all the power supply circuitry and level shifting needed to connect your favourite displa...
Delivered by Wed 15 Jul
Octopus Photo Interrupter Sensor
SKU: EF-EF04012 | Brand: ElecFreaks
Photo Interrupter Sensor is a sensor module based on ITR9608 photoelectric switch, together with special Arduino shield in use. It has been widely used in parts counting, motor speed and so on. Three pins electronic b...
Delivered by Mon 6 Jul
SparkFun GPS Breakout - Chip Antenna, SAM-M8Q (Qwiic)
SKU: SF-GPS-15210 | Brand: SparkFun
The SparkFun SAM-M8Q GPS Breakout features a u-blox SAM-M8Q 72-channel GNSS receiver with a built-in chip antenna. It supports GPS, GLONASS, Galileo, and BeiDou constellations simultaneously, providing improved positi...
Delivered by Mon 6 Jul
SparkFun GPS Breakout - ZOE-M8Q (Qwiic)
SKU: SF-GPS-15193 | Brand: SparkFun
The SparkFun ZOE-M8Q GPS Breakout is a miniaturised, high-accuracy GNSS receiver board with Qwiic (I2C) connectivity. The u-blox ZOE-M8Q is a 72-channel receiver that tracks GPS, GLONASS, BeiDou, and Galileo constella...
Delivered by Mon 6 Jul
SparkFun Distance Sensor Breakout - 4 Meter, VL53L1X (Qwiic)
SKU: SF-SEN-14722 | Brand: SparkFun
This SparkFun Distance Sensor Breakout utilizes the VL53L1X next generation ToF (Time of Flight) sensor module to give you the highly accurate measurements at long ranges for its size. The VL53L1X uses a VCSEL (V...
Delivered by Thu 25 Jun
DC-DC Buck-Mode Power Module (5.5~28V to 3.3V 3A)
SKU: DF-DFR0570 | Brand: DFRobot
This is a DC-DC buck-mode power module, with input voltage range 5.5~28V and fixed output voltage/current 3.3V/3A. Its work frequency can reach to 0.5MHz. The module has high conversion and tiny body, convenient to em...
Delivered by Mon 6 Jul
Gravity: I2C 16x2 Arduino LCD with RGB Font Display (Black)
SKU: DF-DFR0554 | Brand: DFRobot
The Gravity I2C 16×2 LCD features RGB font colours on a black background, allowing you to display text in any of 16 million colour combinations. Using the Gravity I2C interface, only two data lines are needed for both...
Delivered by Mon 6 Jul
LilyPad Light Sensor
SKU: SF-DEV-14629 | Brand: SparkFun
The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and ready to use right away. Each sensor outputs voltage between 0V and 3.3V depending on the level of ambient light shi...
Delivered by Mon 6 Jul
5V 1.8A Isolated Output PoE Module Works with Raspberry Pi 3 B+
SKU: AF-3848 | Brand: Adafruit
An isolated Power over Ethernet (PoE) module that extracts power from the Ethernet cable's centre taps and outputs a regulated 5 V at up to 1.8 A. The built-in isolation transformer ensures there is no direct electric...
Delivered by Wed 15 Jul
5V 1.5A Output PoE Module - Works with Raspberry Pi 3 B+
SKU: AF-3847 | Brand: Adafruit
A compact Power over Ethernet (PoE) module that extracts power from the Ethernet cable's centre taps and outputs a regulated 5 V at up to 1.5 A. Connect the four input wires to the PoE pins on your Ethernet-capable bo...
Delivered by Wed 15 Jul
SparkFun IR Array Breakout - 110 Degree FOV, MLX90640 (Qwiic)
SKU: SF-SEN-14843 | Brand: SparkFun
It’s time to say hip hip array for this IR Breakout! The MLX90640 SparkFun IR Array Breakout is equipped with a 32x24 array of thermopile sensors creating, in essence, a low resolution thermal imaging camera. With thi...
Delivered by Mon 6 Jul
ESP32-WROVER-B Module - ESP32 with PSRAM Module
SKU: AF-3979 | Brand: Adafruit
The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Now get ready to take your bite-sized WiFi capabi...
Delivered by Wed 15 Jul
Adafruit HTU21D-F Temperature Humidity Sensor Breakout Board - Fully Assembled
SKU: AF-3515 | Brand: Adafruit
The Adafruit HTU21D-F is an accurate I²C digital temperature and humidity sensor breakout board. With typical humidity accuracy of ±2% (optimised for 5–95% RH) and temperature accuracy of ±1°C across -30 to 90°C, it's...
Delivered by Thu 25 Jun
Gravity:Digital Magnetic Sensor
SKU: DF-DFR0033 | Brand: DFRobot
what's the best way to detect the magnet? Use anther magnet. But it's not sensitive enough. You have to feel it by youself.Right.This magnetic sensor knows whether there is a magnetic object nearby or not. And it c...
Delivered by Thu 25 Jun
pin:bit
SKU: PR-PIM352 | Brand: Little Bird
pin:bit breaks out all of the useful pins from your micro:bit into breadboard format while providing handy-dandy labels to make your builds go smoothly. It's ideal for building small circuits on a breadboard, ...
Delivered by Thu 25 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
