New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
Touch screen breakout board (0.5mm FPC)
SKU: AF-334 | Brand: Adafruit
If you've got a resistive touch screen that you'd like to use, you'll need this breakout! It has a fine pitch (0.5mm) connector soldered onto it and it's broken out into the 4 resistive wires of the panel. A petite...
Delivered by Fri 23 Oct
SparkFun Thermocouple Breakout - MAX31855K
SKU: SF-SEN-13266 | Brand: SparkFun
The SparkFun MAX31855K Thermocouple Breakout is a simple 14-bit resolution, SPI-compatible, serial interface thermocouple digitizer that makes reading a wide range of temperatures possible. A thermocouple works by ...
Delivered by Fri 23 Oct
SparkFun Altitude/Pressure Sensor Breakout - MPL3115A2
SKU: SF-SEN-11084 | Brand: SparkFun
Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high reso...
Delivered by Fri 23 Oct
DS18B20 Digital temperature sensor + extras
SKU: AF-374 | Brand: Adafruit
These 1-wire digital temperature sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-analog converter. They work great with any microcontro...
Delivered by Fri 23 Oct
SparkFun RFID Reader Breakout
SKU: SF-SEN-13030 | Brand: SparkFun
The SparkFun RFID Reader Breakout converts the 2mm pin spacing of ID-series RFID readers to breadboard-friendly 0.1" headers. Compatible with the ID-3LA, ID-12LA, and ID-20LA readers, this board lets you solder the re...
Delivered by Fri 23 Oct
Gravity: Laser PM2.5 Air Quality Sensor For Arduino
SKU: DF-SEN0177 | Brand: DFRobot
The Gravity Laser PM2.5 Air Quality Sensor uses laser scattering to measure suspended particulate matter concentrations in the air. It detects particles from 0.3 to 10 µm in diameter and outputs digital concentration ...
Delivered by Fri 23 Oct
Analog UV Light Sensor Breakout - GUVA-S12SD
SKU: AF-1918 | Brand: Adafruit
An analog UV light sensor breakout based on the GUVA-S12SD photodiode, detecting the 240–370nm range covering UVB and most of the UVA spectrum. An on-board op-amp amplifies the tiny photodiode current to a readable vo...
Delivered by Fri 23 Oct
WT8266-S1 WiFi Module Based on ESP8266
SKU: DF-TEL0109 | Brand: DFRobot
WT8266-S1 Wi-Fi module is a low consumption, high performance embedded Wi-Fi network control module designed by Wireless-Tag. It can meet the IoT application requirements in smart power grids, building aut...
Delivered by Fri 23 Oct
SparkFun Line Sensor Breakout - QRE1113 (Digital)
SKU: SF-ROB-09454 | Brand: SparkFun
The SparkFun QRE1113 Line Sensor Breakout (Digital) is a compact IR reflectance sensor board that outputs a digital signal based on surface reflectivity. It uses a capacitor discharge circuit — the faster the 10 nF ca...
Delivered by Fri 23 Oct
LPG Gas Sensor - MQ-6
SKU: SF-SEN-09405 | Brand: SparkFun
A simple-to-use MQ-6 gas sensor for detecting liquefied petroleum gas (LPG) — primarily propane and butane — in the air. The sensor detects concentrations from 200 to 10,000 ppm with high sensitivity and fast response...
Delivered by Fri 23 Oct
LPS331AP Pressure/Altitude Sensor Carrier with Voltage Regulator
SKU: PL-2126 | Brand: Pololu
A breakout board for ST's LPS331AP digital barometric pressure sensor. This sensor measures absolute pressure from 260 to 1260 mbar with excellent accuracy (±2 mbar), making it ideal for altitude estimation, weather m...
Delivered by Fri 23 Oct
8*8 dot matrix module
SKU: LB-LR0122 | Brand: Little Bird
This module consists of 64 LEDs with MAX7219 driver chip. It can control 64 LEDs by 16-bit data serial input and output. If you want to control it, you only need to control three IO ports. It support for cascading mul...
Delivered by Fri 23 Oct
SparkFun RGB LED Breakout - WS2812B (with Headers) - SparkFun Electronics
SKU: SF-BOB-29762 | Brand: SparkFun
The WS2812 (often referred to as a "NeoPixel") has become the standard for addressable LED projects. This RGB LED Breakout board, now with pre-soldered right-angle headers, is the absolute easiest way to st...
Delivered by Fri 23 Oct
Adafruit PCM5102 I2S DAC with Line Level Output - 112dB SNR
SKU: AF-6250 | Brand: Adafruit
The Adafruit PCM5102 I2S DAC converts digital I2S audio into excellent stereo line-level output through a 3.5mm jack. With an impressive 112dB signal-to-noise ratio and no MCLK or I2C configuration required, simply pi...
Delivered by Fri 23 Oct
Adafruit DS2484 I2C to 1-Wire Bus Adapter Breakout
SKU: AF-5976 | Brand: Adafruit
The Adafruit DS2484 is a single-channel I2C-to-1-Wire bus adapter breakout with built-in ESD protection and split supply support. Simply connect it to an existing I2C bus and use the screw terminals to attach DS18B20 ...
Delivered by Fri 23 Oct
Pixelblaze V3 Pico - WiFi LED Controller
SKU: AF-5943 | Brand: Adafruit
Pixelblaze is a Wi-Fi Addressable LED Controller and Custom Pattern Editor, powered by an ESP32 module with 240Mhz dual-core processor for 'blazingly fast' pixel rendering capabilities.This is the Pixelblaze V3 Pico w...
Delivered by Fri 23 Oct
ESP32-C6 MINI Module - 4MB (PCB Antenna)
SKU: SF-WRL-24807 | Brand: SparkFun
The ESP32-C6 MINI is Espressif's compact WiFi 6 module integrating 2.4GHz Wi-Fi 6 (802.11ax), Bluetooth 5.3 (LE), and IEEE 802.15.4 (Thread/Zigbee) into a single package with an on-board PCB antenna. Built around a hi...
Delivered by Fri 23 Oct
Motoron M1U256 Single Serial Motor Controller
SKU: PL-5063 | Brand: Pololu
The Motoron M1U256 Single I²C Motor Controller offers a compact solution for controlling two DC motors using a UART serial interface. Multiple Motoron controllers can be connected to the same serial bus, making it eas...
Delivered by Fri 23 Oct
Fermion: GR10-30 Gesture Sensor (Breakout, UART & I2C, 12 Gestures, 0~30cm)
SKU: DF-SEN0543 | Brand: DFRobot
This GR10-30 gesture sensor is capable of recognizing 12 hand gestures: move up, down, left, right, forward & backward, rotate clockwise & counterclockwise, rotate clockwise & counterclockwise continuously, hover, and...
Delivered by Fri 23 Oct
MIKROE Weather Click
SKU: SF-SEN-18823 | Brand: SparkFun
MIKROE Weather Click carries BME280 integrated environmental unit from Bosch. It’s a sensor that detects humidity, pressure, and temperature, specifically designed for low current consumption and long-term stability. ...
Delivered by Fri 23 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
