New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
Adafruit Pixel Shifter - For Addressable LEDs
SKU: AF-6066 | Brand: Adafruit
The Adafruit Pixel Shifter is a simple inline level-shifting board for addressable LEDs like NeoPixels (WS2812, SK6812) and similar one-wire-control pixels. It solves the common problem of 3.3V microcontrollers not be...
Delivered by Fri 19 Jun
Gravity: BMM350 Triple-Axis Magnetometer Sensor for AR / VR
SKU: DF-SEN0619 | Brand: DFRobot
The DFRobot Gravity: BMM350 3-axis geomagnetic sensor is designed to measure magnetic fields across three vertical axes and functions as a compass. Utilizing Bosch's patented FlipCore technology, this sensor provides ...
Delivered by Tue 30 Jun
Adafruit NeoPixel Breakout with JST SH Connectors
SKU: AF-5975 | Brand: Adafruit
A compact single-NeoPixel breakout board with mounting holes and pluggable JST SH connectors, perfect for adding individually addressable RGB lighting to small projects. The PCB measures less than 13 × 13 mm and works...
Delivered by Fri 19 Jun
Fermion: MEMS Ethanol EtOH Gas Detection Sensor (Breakout, 1-500ppm)
SKU: DF-SEN0569 | Brand: DFRobot
The Fermion MEMS Ethanol (EtOH) Gas Detection Sensor uses micro-electromechanical system (MEMS) technology for compact, low-power ethanol gas detection. With a detection range of 1–500 ppm, it provides qualitative mea...
Delivered by Fri 19 Jun
Fermion: MEMS Hydrogen Sulfide H2S Gas Detection Sensor (Breakout, 0.5-50ppm)
SKU: DF-SEN0568 | Brand: DFRobot
Fermion: MEMS Hydrogen Sulfide H2S Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20m...
Delivered by Fri 19 Jun
Adafruit I2C Quad Rotary Encoder Breakout with NeoPixel
SKU: AF-5752 | Brand: Adafruit
The Adafruit I2C Quad Rotary Encoder Breakout lets you read up to four rotary encoders from a single board over I2C. An onboard microcontroller running Adafruit's seesaw firmware handles all pulse tracking, debouncing...
Delivered by Thu 9 Jul
SparkFun CO₂ Humidity and Temperature Sensor - SCD41 (Qwiic)
SKU: SF-SEN-22396 | Brand: SparkFun
This SparkFun CO2 Humidity and Temperature Sensor features the next-generation SCD41 photoacoustic CO2 sensor for high-accuracy environmental readings. The SCD41 uses Sensirion's PASens® photoacoustic measurement syst...
Delivered by Tue 30 Jun
Adafruit I2S Amplifier BFF Add-On for QT Py and Xiao
SKU: AF-5770 | Brand: Adafruit
The Adafruit I2S Amplifier BFF is a compact add-on that brings high-quality 3W audio to any QT Py or Xiao development board. Featuring a MAX98357 Class D amplifier, it delivers crisp I2S digital audio using just three...
Delivered by Thu 9 Jul
SparkFun Qwiic Dynamic NFC/RFID Tag
SKU: SF-SEN-21274 | Brand: SparkFun
The SparkFun Qwiic Dynamic NFC/RFID Tag features the ST25DV64KC dynamic Near Frequency Communication (NFC) / Radio Frequency Identification (RFID) tag IC from STMicroelectronics©. The ST25DV64KC offers 64-kBit (8-kByt...
Delivered by Tue 30 Jun
Infrared IR Proximity Sensor for Arduino (10±5mm~80±20mm)
SKU: DF-SEN0556 | Brand: DFRobot
An infrared proximity sensor that detects objects at distances of 10 ±5 mm to 80 ±20 mm by measuring reflected IR energy. It outputs a simple high/low digital signal, making it easy to integrate with Arduino and other...
Delivered by Tue 30 Jun
Gravity: I2C SCD41 Infrared CO2 Sensor (400 - 5000 ppm)
SKU: DF-SEN0536 | Brand: DFRobot
The Gravity SCD41 Infrared CO2 Sensor provides accurate carbon dioxide, temperature, and humidity measurements in a single compact module. Based on Sensirion's SCD41 sensor, it uses photoacoustic NDIR (non-dispersive ...
Delivered by Fri 19 Jun
SparkFun Buck Regulator Breakout - 5V (AP63357)
SKU: SF-COM-21255 | Brand: SparkFun
The SparkFun 5V Buck Regulator Breakout features the AP63357 from Diodes Inc., a 3.5A synchronous buck converter with a wide input voltage range of 3.8V to 32V. The fully integrated 74mΩ high-side power MOSFET/40m...
Delivered by Tue 30 Jun
DC-DC Charge Discharge Integrated Module (5V/2A)
SKU: DF-DFR1026 | Brand: DFRobot
This is a DC charging and discharging integrated module, with 5V normally open output, which is not affected by load access and has a maximum load current of 2A. It features 4 levels of charge/discharge electricity in...
Delivered by Tue 30 Jun
Adafruit Si5351A Clock Generator with STEMMA QT - 8KHz to 160MHz
SKU: AF-5640 | Brand: Adafruit
The Adafruit Si5351A Clock Generator with STEMMA QT lets you generate precise, arbitrary clock frequencies from 8 kHz to over 150 MHz using a simple I2C interface. This updated version adds STEMMA QT / Qwiic connector...
Delivered by Fri 19 Jun
SparkFun Level Shifter - 8 Channel (TXS01018E)
SKU: SF-BOB-19626 | Brand: SparkFun
The SparkFun 8 Channel Level Shifter Breakout features the TXS01018E™ 8-bit, bi-directional logic level translator from Texas Instruments. This board allows you to easily shift logic between devices running at diff...
Delivered by Tue 30 Jun
Adafruit TSC2007 I2C Resistive Touch Screen Controller
SKU: AF-5423 | Brand: Adafruit
The Adafruit TSC2007 is an I2C resistive touch screen controller that offloads touch reading from your microcontroller. Instead of using multiple analog pins and constant polling, the TSC2007 handles all the touch sen...
Delivered by Thu 9 Jul
Fermion: Multifunctional Environmental Sensor (Breakout)
SKU: DF-SEN0500 | Brand: DFRobot
This compact multifunctional environmental sensor combines four professional sensor chips into a single breakout board: SHTC3 (temperature and humidity), BMP280 (barometric pressure), VEML7700 (ambient light), and ML8...
Delivered by Tue 30 Jun
ADXL375 - High G Accelerometer (+-200g) with I2C and SPI
SKU: AF-5374 | Brand: Adafruit
The Adafruit ADXL375 is a high-G triple-axis accelerometer capable of measuring up to ±200g of force. It communicates via I2C or SPI and includes STEMMA QT connectors for solderless I2C connections. An on-board 3.3V r...
Delivered by Thu 9 Jul
4-Channel Level Converter (12V to 3.3V)
SKU: DF-DFR0913 | Brand: DFRobot
This DFRobot 4-channel optocoupler-isolated level converter translates 12V signals down to 3.3V, making it easy to interface industrial sensors and PLC outputs with Arduino, Raspberry Pi, and other 3.3V microcontrolle...
Delivered by Fri 19 Jun
Adafruit MiniBoost 5V @ 1A - TPS61023
SKU: AF-4654 | Brand: Adafruit
The Adafruit MiniBoost 5V @ 1A is a compact inductor-based boost converter that delivers up to 1 A of regulated 5 V output from a 2–5 V input. About the size of a linear regulator, it's perfect for powering microcontr...
Delivered by Thu 9 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
