New Arrivals

SKU: AF-4776 | Brand: Adafruit

These are the smallest NeoPixel breakouts around! Tiny, bright RGB+White pixels to your project. These little PCBs are only 9.1mm x 9.1mm and have two sets of three pads on the back for soldering wires. These ultra...

SKU: AF-4711 | Brand: Adafruit

The AP3429A Buck Converter Breakout steps down 3.4–5.5V input to a stable 3.3V output at up to 1.2A, with 90–95% efficiency. It's ideal for powering 3.3V circuits from LiPo batteries, 3× alkaline cells, or USB power s...

SKU: AF-4488 | Brand: Adafruit

The Adafruit LIS2MDL is a triple-axis magnetometer (compass) breakout from ST, capable of sensing magnetic fields across a wide ±50 gauss (±5000 µT) range with no range configuration required. It's ideal for detecting...

SKU: AF-4407 | Brand: Adafruit

The Adafruit MLX90640 IR Thermal Camera Breakout features a 24×32 array of infrared thermal sensors that returns 768 individual temperature readings over I2C. It's an affordable way to add heat-vision to any microcont...

SKU: LB-TILT | Brand: Little Bird

A simple tilt sensor module that detects orientation changes. When tilted, the internal conductive ball breaks the circuit; when returned upright, it reconnects — providing a digital output signal. It's a compact, low...

SKU: DF-DFR0231-H | Brand: DFRobot

Gravity: UART & I2C NFC Module adopts NXP PN532, a highly integrated NFC communication controller, which supports various types of NFC smart cards or tags like the commonly used MIFARE Classic series and NTAG series i...

SKU: AF-4101 | Brand: Adafruit

The Adafruit MCP9600 I2C Thermocouple Amplifier handles all the analogue complexity of thermocouple measurement for you. Simply connect your thermocouple, wire up I2C, and read accurate temperature data from virtually...

SKU: DF-SEN0250 | Brand: DFRobot

The BMI160 6-axis inertial motion sensor is a new product from DFRobot. It is based on Bosch BMI160 6-axis MEMS sensor which integrates 16-bit 3-axis accelerometer with ultra-low-power 3-axis gyroscope. Bosch BMI160 ...

SKU: AF-4162 | Brand: Adafruit

The Adafruit VEML7700 is a high-accuracy ambient light sensor from Vishay that outputs calibrated lux values over I2C. Unlike basic light sensors that return unitless brightness readings, the VEML7700 calculates lux (...

SKU: AF-1083 | Brand: Adafruit

Add high-speed analog-to-digital conversion to any microcontroller with the ADS1015 breakout. This 12-bit ADC delivers 3,300 samples per second over I2C, with four single-ended or two differential input channels and a...

SKU: AF-1375 | Brand: Adafruit

This breakout board is the simplest way to create a project with a single "toggle" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sens...

SKU: AF-3492 | Brand: Adafruit

The Adafruit PDM MEMS Microphone Breakout provides a digital audio input using Pulse Density Modulation (PDM) — a common interface in commercial products that's distinct from both analogue and I2S microphones. It's id...

SKU: SF-SEN-14262 | Brand: SparkFun

The SparkFun Sound Detector is a small and very easy-to-use audio sensing board with three different outputs. The Sound Detector not only provides an audio output, but also a binary indication of the presence of sound...

SKU: DF-DFR0028 | Brand: DFRobot

This is an arduino tilt sensor. It is used to detect orientation. Inside the sensor, there is a ball that make contact with the pins when the case is upright. Tilt the sensor over and the balls don't touch, thus n...

SKU: SF-SEN-13637 | Brand: SparkFun

A simple breakout board for measuring moisture in soil and similar materials. The two large exposed pads act as probes — functioning as a variable resistor where higher moisture means better conductivity, lower resist...

SKU: AF-163 | Brand: Adafruit

A precision triple-axis accelerometer breakout featuring the Analog Devices ADXL335. With a ±3 g measurement range and analog outputs for X, Y, and Z axes, this sensor is ideal for tilt sensing, motion detection, and ...

SKU: DF-DFR0034 | Brand: DFRobot

This is a new Arduino compatible Analog Sound Sensor. Sound Sensor is typically used in detecting the loudness in ambient, the Arduino can collect its output signal and actuate accordingly. You may use it to make some...

SKU: DF-SEN0209 | Brand: DFRobot

This is an Arduino compatible piezo film vibration sensor. It is made up of flexible piezo film and converter board. The sensor is able to detect vibration, flexibility, impact and touch. The film is a flexible compo...

SKU: AF-2857 | Brand: Adafruit

The Adafruit Sensirion SHT31-D is a high-accuracy temperature and humidity sensor with a true I2C interface and PTFE filter for protection against dust and contaminants. Part of Sensirion's third-generation SHT sensor...

SKU: DF-TEL0191 | Brand: DFRobot

The HUSKYLENS 2 WiFi Module is a plug-and-play USB expansion accessory that adds high-speed Wi-Fi 6 connectivity to the HUSKYLENS 2 AI vision sensor. Transform your HUSKYLENS 2 from a wired peripheral into a fully wir...