New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
JST Breakout for E-Textiles and Paper Circuits
SKU: LB-JSTBOARD | Brand: Little Bird
This E-textiles board is a breakout for a JST, so you can sew it onto a garment or use it in Paper Circuits! The JST breakout board can be easily sewn through the large holes. For paper circuits, simply apply coppe...
Delivered by Thu 20 Aug
Adafruit MCP9600 I2C Thermocouple Amplifier - K, J, T, N, S, E, B and R Type T
SKU: AF-4101 | Brand: Adafruit
The Adafruit MCP9600 I2C Thermocouple Amplifier handles all the analogue complexity of thermocouple measurement for you. Simply connect your thermocouple, wire up I2C, and read accurate temperature data from virtually...
Delivered by Fri 11 Sep
Adafruit PCM5100 I2S DAC with Line Level Output - 100dB SNR
SKU: AF-6251 | Brand: Adafruit
The Adafruit PCM5100 I2S DAC converts digital I2S audio into clean, high-quality stereo line-level output through a 3.5mm jack. With 100dB signal-to-noise ratio and no MCLK or I2C configuration required, simply pipe I...
Delivered by Fri 11 Sep
Fermion: BME688 AI Environmental Sensor (VOC, Temperature, Humidity, Pressure)
SKU: DF-SEN0629 | Brand: DFRobot
The BME688 AI Environmental Sensor is a highly advanced MEMS sensor that combines temperature, humidity, barometric pressure, and VOC detection in a single, compact package. Featuring ±0.5°C temperature accurac...
Delivered by Mon 31 Aug
SparkFun CO₂ Humidity and Temperature Sensor - SCD41 (Qwiic)
SKU: SF-SEN-22396 | Brand: SparkFun
This SparkFun CO2 Humidity and Temperature Sensor features the next-generation SCD41 photoacoustic CO2 sensor for high-accuracy environmental readings. The SCD41 uses Sensirion's PASens® photoacoustic measurement syst...
Delivered by Mon 31 Aug
Gravity: I2C SCD41 Infrared CO2 Sensor (400 - 5000 ppm)
SKU: DF-SEN0536 | Brand: DFRobot
The Gravity SCD41 Infrared CO2 Sensor provides accurate carbon dioxide, temperature, and humidity measurements in a single compact module. Based on Sensirion's SCD41 sensor, it uses photoacoustic NDIR (non-dispersive ...
Delivered by Thu 20 Aug
Adafruit Si5351A Clock Generator with STEMMA QT - 8KHz to 160MHz
SKU: AF-5640 | Brand: Adafruit
The Adafruit Si5351A Clock Generator with STEMMA QT lets you generate precise, arbitrary clock frequencies from 8 kHz to over 150 MHz using a simple I2C interface. This updated version adds STEMMA QT / Qwiic connector...
Delivered by Thu 20 Aug
SparkFun Indoor Air Quality Sensor - ENS160 (Qwiic)
SKU: SF-SEN-20844 | Brand: SparkFun
The SparkFun ENS160 Indoor Air Quality Sensor is a digital multi-gas sensor solution with four sensor elements that can be used in a wide range of applications including building automation, smart home, and HVAC. The ...
Delivered by Thu 20 Aug
SparkFun Level Shifter - 8 Channel (TXS01018E)
SKU: SF-BOB-19626 | Brand: SparkFun
The SparkFun 8 Channel Level Shifter Breakout features the TXS01018E™ 8-bit, bi-directional logic level translator from Texas Instruments. This board allows you to easily shift logic between devices running at diff...
Delivered by Mon 31 Aug
4-Channel Level Converter (12V to 3.3V)
SKU: DF-DFR0913 | Brand: DFRobot
This DFRobot 4-channel optocoupler-isolated level converter translates 12V signals down to 3.3V, making it easy to interface industrial sensors and PLC outputs with Arduino, Raspberry Pi, and other 3.3V microcontrolle...
Delivered by Thu 20 Aug
SparkFun Qwiic EEPROM Breakout - 512Kbit
SKU: SF-COM-18355 | Brand: SparkFun
The SparkFun Qwiic EEPROM Breakout is a simple and cost effective option to add some extra storage space to any project. With 512 kilo-bits (or 64 kilo-bytes) of storage, this product is great for any microcontroller ...
Delivered by Mon 31 Aug
Mini Basic PIR Sensor - BS412
SKU: AF-4666 | Brand: Adafruit
A compact passive infrared (PIR) motion sensor that detects movement from approximately 3–8 metres away. Much smaller than standard PIR modules, making it ideal for unobtrusive, space-constrained projects. Fully self-...
Delivered by Fri 11 Sep
Adafruit ISM330DHCX + LIS3MDL FeatherWing - High Precision 9-DoF IMU
SKU: AF-4569 | Brand: Adafruit
The Adafruit ISM330DHCX + LIS3MDL FeatherWing combines two precision ST sensors to deliver 9 degrees of freedom — accelerometer, gyroscope, and magnetometer — in the Feather form factor. Stack it onto any Feather boar...
Delivered by Fri 11 Sep
I2S Microphone Module
SKU: DF-SEN0327 | Brand: DFRobot
A compact digital MEMS microphone module based on the MSM261S4030H0 chip, providing 24-bit I2S digital audio output. The built-in I2S interface connects directly to DSPs and microcontrollers without requiring an exter...
Delivered by Mon 31 Aug
SparkFun Atmospheric Sensor Breakout - BME280 (Qwiic)
SKU: SF-SEN-15440 | Brand: SparkFun
The BME280 Atmospheric Sensor Breakout measures barometric pressure, relative humidity, and temperature from a single compact board. With both Qwiic (I2C) and 0.1″ header connections, it integrates easily into Arduino...
Delivered by Thu 20 Aug
ESP8266 SMT Module - ESP-12
SKU: PI-COM2800 | Brand: Pimoroni
Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client...
Delivered by Thu 20 Aug
Adafruit Capacitive Touch HAT for Raspberry Pi - Mini Kit [MPR121]
SKU: AF-2340 | Brand: Adafruit
The Adafruit Capacitive Touch HAT adds 12 capacitive touch sensors to your Raspberry Pi using the MPR121 touch controller over I2C. Each sensor has a figure-8 hole designed for alligator clip connections — attach clip...
Delivered by Thu 20 Aug
SparkFun ESP8266 Thing
SKU: SF-WRL-13231 | Brand: SparkFun
The SparkFun ESP8266 Thing is a breakout and development board for the ESP8266 WiFi SoC — a popular platform for IoT and WiFi-connected projects. All module pins are broken out to breadboard-compatible rows, and on-bo...
Delivered by Thu 20 Aug
ESP32-Pico DALI2 Lighting Control Module
SKU: WS-28643 | Brand: Waveshare
Illuminate Your Smart Home with Precision: DALI2 Expansion Module for ESP32-Pico BoardsTake your lighting automation to the next level with the DALI2 Expansion Module, designed to integrate effortlessly with the ESP3...
Delivered by Thu 20 Aug
SparkFun Photoacoustic Spectroscopy CO2 Sensor - PASCO2V01 (Qwiic)
SKU: SF-SEN-22956 | Brand: SparkFun
The SparkFun Photoacoustic Spectroscopy CO2 Sensor features the Infineon XENSIV PAS CO2 (PASCO2V01) sensor, which delivers highly accurate CO2 measurements in direct parts-per-million (ppm) format. The photoacoustic s...
Delivered by Mon 31 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
