New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
i2c / SPI character LCD backpack
SKU: AF-292 | Brand: Adafruit
LCD backpacks reduce the number of pins needed to connect to an LCD. LCDs are a fun and easy way to have your microcontroller project talk back to you. Character LCDs are common, and easy to get, available in tons ...
Delivered by Fri 19 Jun
SparkFun Thermocouple Breakout - MAX31855K
SKU: SF-SEN-13266 | Brand: SparkFun
The SparkFun MAX31855K Thermocouple Breakout is a simple 14-bit resolution, SPI-compatible, serial interface thermocouple digitizer that makes reading a wide range of temperatures possible. A thermocouple works by ...
Delivered by Fri 19 Jun
Adafruit SPI Non-Volatile FRAM Breakout - 64Kbit / 8KByte
SKU: AF-1897 | Brand: Adafruit
The Adafruit SPI Non-Volatile FRAM Breakout provides 64 Kbit (8 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no pa...
Delivered by Fri 19 Jun
ESP32(ESP-WROOM-32) WiFi Bluetooth Dual-Core MCU Module
SKU: DF-TEL0111 | Brand: DFRobot
INTRODUCTION The ESP32 WiFi and Bluetooth chip is the latest generation of Espressif products. It has a dual-core 32-bit MCU, which integrates WiFi HT40 and Bluetooth/BLE 4.2 technology inside. Compare...
Delivered by Tue 30 Jun
LPS331AP Pressure/Altitude Sensor Carrier with Voltage Regulator
SKU: PL-2126 | Brand: Pololu
A breakout board for ST's LPS331AP digital barometric pressure sensor. This sensor measures absolute pressure from 260 to 1260 mbar with excellent accuracy (±2 mbar), making it ideal for altitude estimation, weather m...
Delivered by Fri 19 Jun
8*8 dot matrix module
SKU: LB-LR0122 | Brand: Little Bird
This module consists of 64 LEDs with MAX7219 driver chip. It can control 64 LEDs by 16-bit data serial input and output. If you want to control it, you only need to control three IO ports. It support for cascading mul...
Delivered by Fri 19 Jun
IR Thermal Imaging Camera Module – 80x62, Motion Detection, SPI/I2C, Raspberry Pi Compatible, 44° FOV
SKU: WS-31940 | Brand: Waveshare
Elevate your technological projects with our cutting-edge Long-wave IR Thermal Imaging Camera Module. Designed for seamless integration with Raspberry Pi and other development boards, this module is an ideal addition ...
Delivered by Fri 10 Jul
Thermal Imaging Camera Module LWIR – 80x62, SPI/I2C, Raspberry Pi Compatible, 90° FOV
SKU: WS-31941 | Brand: Waveshare
Elevate your technological projects with our cutting-edge Long-wave IR Thermal Imaging Camera Module. Designed for seamless integration with Raspberry Pi and other development boards, this module is an ideal addition ...
Delivered by Fri 10 Jul
10.85" e-Paper Display (G) – 1360x480, Red/Yellow/Black/White, SPI
SKU: WS-29792 | Brand: Waveshare
The Waveshare 10.85" e-Paper Display (G) is a wide-format E-Ink screen with 1360×480 resolution and quad-colour output — red, yellow, black, and white. Using microcapsule electrophoretic technology, it delivers a pape...
Delivered by Fri 10 Jul
1.54" Tri-Color e-Paper Display – 200x200, SPI Interface
SKU: WS-30475 | Brand: Waveshare
A 1.54-inch four-colour e-Paper (eInk) display with 200×200 resolution, rendering in red, yellow, black, and white. With a viewing angle exceeding 170° and no backlight required, it provides paper-like readability in ...
Delivered by Fri 10 Jul
Adafruit SPI Flash SD Card - XTSD 2 GB
SKU: AF-6038 | Brand: Adafruit
The Adafruit SPI Flash SD Card breakout features an XTSD 2 GB chip — an SD card in an SMT package that you can wire up like standard SPI flash but use with existing SD card libraries. It comes pre-formatted as a 2 GB ...
Delivered by Thu 9 Jul
Gravity: BME688 AI Environmental Sensor (VOC, Temperature, Humidity, Pressure)
SKU: DF-SEN0617 | Brand: DFRobot
The Gravity BME688 is an advanced MEMS environmental sensor from Bosch that measures temperature, humidity, barometric pressure, and volatile organic compounds (VOC) in a single compact module. It supports both I²C an...
Delivered by Tue 30 Jun
ESP32-C6 MINI Module - 4MB (PCB Antenna)
SKU: SF-WRL-24807 | Brand: SparkFun
The ESP32-C6 MINI is Espressif's compact WiFi 6 module integrating 2.4GHz Wi-Fi 6 (802.11ax), Bluetooth 5.3 (LE), and IEEE 802.15.4 (Thread/Zigbee) into a single package with an on-board PCB antenna. Built around a hi...
Delivered by Fri 19 Jun
ESP32-C6 WROOM Module - 16MB (PCB Antenna)
SKU: SF-WRL-24806 | Brand: SparkFun
The ESP32-C6-WROOM-1 is Espressif's first Wi-Fi 6 module, integrating 2.4 GHz Wi-Fi 6 (802.11ax), Bluetooth 5.3 (LE), and IEEE 802.15.4 (Thread/Zigbee) on a single chip. Built around a high-performance 32-bit RISC-V c...
Delivered by Tue 30 Jun
Adafruit TSC2046 SPI Resistive Touch Screen Controller
SKU: AF-5767 | Brand: Adafruit
The Adafruit TSC2046 is an SPI resistive touch screen controller that offloads touch reading from your microcontroller. Instead of tying up analog pins and constantly polling, the TSC2046 handles all touch sensing ove...
Delivered by Thu 9 Jul
ESP32-H2-MINI-1 Module - 4MB Flash
SKU: AF-5716 | Brand: Adafruit
Coming soon! ESP32-H2-MINI-1 is a powerful, generic Bluetooth® Low Energy and IEEE 802.15.4 combo module that has a rich set of peripherals. This module is an ideal choice for a wide variety of application scenari...
Delivered by Thu 9 Jul
FLiR Lepton Breakout Board V2
SKU: SF-BOB-16912 | Brand: SparkFun
The FLIR Lepton® Thermal Camera Breakout Board is an easy-to-interface evaluation board to quickly connect the FLIR Lepton camera module to common platforms like Raspberry Pi or custom hardware. It provides onboard po...
Delivered by Tue 30 Jun
SparkFun 6DoF IMU Breakout - ISM330DHCX (Qwiic)
SKU: SF-SEN-19764 | Brand: SparkFun
A Qwiic-compatible breakout board for the STMicroelectronics ISM330DHCX — a high-performance 3D accelerometer and 3D gyroscope designed for industrial applications. The 1" × 1" board communicates over I2C via the Qwii...
Delivered by Tue 30 Jun
Fermion: I2C H3LIS200DL Triple Axis Accelerometer (Breakout) (±100g/±200g)
SKU: DF-SEN0408 | Brand: DFRobot
The Fermion H3LIS200DL is an ultra-low-power, low-noise triple-axis accelerometer with user-selectable full-scale ranges of ±100g and ±200g. Capable of measuring accelerations with output data rates from 0.5 Hz to 1 k...
Delivered by Tue 30 Jun
Fermion: ICG 20660L Accel+Gyro 6-Axis IMU Module (Breakout)
SKU: DF-SEN0443 | Brand: DFRobot
The ICG-20660L is a high-precision 6-axis IMU module that integrates a 3-axis accelerometer(±2/4/8/16g), a 3-axis gyroscope(±125/250/500dps), and on-chip 16-bit ADCs. With up to ±1% initial sensitivity and low noise(6...
Delivered by Tue 30 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
