New Arrivals

SKU: AF-4517 | Brand: Adafruit

The Adafruit LSM6DSOX + LIS3MDL is a precision 9 Degree of Freedom (9-DoF) inertial measurement unit on a single breakout board. It combines the LSM6DSOX accelerometer/gyroscope — known for exceptionally low gyro drif...

SKU: AF-5181 | Brand: Adafruit

The AM2301B is an affordable enclosed temperature and humidity sensor featuring an I2C interface — a modern upgrade over the classic DHT22/AM2302 sensors that required bit-bang timing protocols. Inside is the proven A...

SKU: AF-5309 | Brand: Adafruit

The Adafruit MSA311 is a compact, low-cost triple-axis accelerometer with 14-bit resolution and a rich set of built-in motion detection features. Very similar to the MSA301 but with an updated I2C address (0x62 instea...

SKU: AF-4488 | Brand: Adafruit

The Adafruit LIS2MDL is a triple-axis magnetometer (compass) breakout from ST, capable of sensing magnetic fields across a wide ±50 gauss (±5000 µT) range with no range configuration required. It's ideal for detecting...

SKU: EC-RPA05036T | Brand: Elecrow

The 2-in-1 TF Card Dual System Switcher lets you install two MicroSD (TF) cards on a single Raspberry Pi and switch between them using a physical toggle. This allows you to run two different operating systems and swap...

SKU: AF-4494 | Brand: Adafruit

The Adafruit DPS310 is a high-precision barometric pressure and altitude sensor from Infineon, mounted on a breakout board with STEMMA QT / Qwiic connectors for solderless I2C wiring. It delivers ±1 hPa absolute accur...

SKU: DF-SEN0290 | Brand: DFRobot

Gravity: Lightning Sensor employs AMS innovative AS3935 Franklin lightning sensor IC and Coilcraft MA5532-AE dedicated antenna to detect lightning distance, intensity, and frequency within a radius of 40km both indoor...

SKU: AF-1083 | Brand: Adafruit

Add high-speed analog-to-digital conversion to any microcontroller with the ADS1015 breakout. This 12-bit ADC delivers 3,300 samples per second over I2C, with four single-ended or two differential input channels and a...

SKU: PI-COM0206 | Brand: Pimoroni

The MCP3008 is a 10-bit analogue-to-digital converter with eight single-ended input channels, communicating via SPI. It's a popular choice for adding analogue inputs to the Raspberry Pi and other digital-only boards —...

SKU: DF-DFR0028 | Brand: DFRobot

This is an arduino tilt sensor. It is used to detect orientation. Inside the sensor, there is a ball that make contact with the pins when the case is upright. Tilt the sensor over and the balls don't touch, thus n...

SKU: AF-2857 | Brand: Adafruit

The Adafruit Sensirion SHT31-D is a high-accuracy temperature and humidity sensor with a true I2C interface and PTFE filter for protection against dust and contaminants. Part of Sensirion's third-generation SHT sensor...

SKU: EC-DLC44156D-CRV12414P-004 | Brand: Elecrow

The CrowView Note is an innovative all-in-one portable monitor that cleverly integrates a high-definition screen, full-function keyboard, touchpad, and speakers into a single unit, creating a plug-and-play mobile work...

SKU: LB-LS6972x2 | Brand: Little Bird

A compact stereo speaker pair for small audio projects, handheld devices, and embedded builds. Each 45mm driver is rated at 4Ω and 3W, delivering clear, balanced sound in a slim form factor. Pre-wired with a PH2.0 plu...

SKU: DF-SEN0629 | Brand: DFRobot

  The BME688 AI Environmental Sensor is a highly advanced MEMS sensor that combines temperature, humidity, barometric pressure, and VOC detection in a single, compact package. Featuring ±0.5°C temperature accurac...

SKU: DF-DFR1138 | Brand: DFRobot

##Introduction The RPLIDAR C1 is a new generation fusion-type DTOF (Direct Time of Flight) laser scanner from SLAMTEC. This advanced LIDAR system excels in high-definition detection of small and nearby objects, offeri...

SKU: WS-26244 | Brand: Waveshare

An RS485-controlled industrial I/O module with 8 isolated digital inputs and 8 open-drain digital outputs, communicating via the Modbus RTU protocol. Multiple protection layers — power isolation, magnetic isolation, T...

SKU: DF-DFR1170 | Brand: DFRobot

The DFRobot 10.5" LED Touch Portable Monitor delivers crisp 1920×1280 visuals on an IPS panel with LED backlighting, 400 cd/m² brightness, and a 1500:1 contrast ratio. The fully laminated 10-point capacitive touch scr...

SKU: SF-BOB-19389 | Brand: SparkFun

The SparkFun Analog MEMS Microphone Breakout makes it easy to work with the SPH8878LR5H-1 analog microphone from Knowles. This board features an OpAmp to bring the output of the microphone to a usable level, allowing ...

SKU: DF-SEN0500 | Brand: DFRobot

This compact multifunctional environmental sensor combines four professional sensor chips into a single breakout board: SHTC3 (temperature and humidity), BMP280 (barometric pressure), VEML7700 (ambient light), and ML8...

SKU: EC-DIS08001R | Brand: Elecrow

A portable 8″ IPS LCD monitor with 1280 × 800 resolution and 5-point capacitive touchscreen. The aluminium alloy shell keeps the display compact and durable, while the IPS panel delivers consistent image quality at wi...