New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
HC-05 Bluetooth module
SKU: LB-LR0109 | Brand: Little Bird
Add Bluetooth functionality to your project with the HC-05 Bluetooth Module. The module is found on a breakout board which provides breadboard-friendly headers for power, ground, TX, RX and enable pins. The breakou...
Delivered by Fri 19 Jun
Little Bird Lorikeet WS2812B Rainbow Board
SKU: LB-LORIKEET | Brand: Little Bird
The Little Bird Lorikeet is an Australian-made RGB LED board featuring five individually addressable WS2812B LEDs (NeoPixel-compatible). Control all five LEDs from a single microcontroller pin using the WS2812B serial...
Delivered by Fri 19 Jun
Little Bird Macaw WS2812B Rainbow Board 3 LED
SKU: LB-MACAW | Brand: Little Bird
The Little Bird Macaw is an RGB LED strip 3 programmable LEDs. This Australian made board uses the WS2812B LED (better known as NeoPixels). This LED strip has a chain-able design means you can hook up several modu...
Delivered by Fri 19 Jun
Beetle BLE - The smallest Arduino bluetooth 4.0 (BLE)
SKU: DF-DFR0339 | Brand: DFRobot
Bluno Beetle - The smallest Arduino Board is another milestone in wearable electronics device area based arduino uno, which makes DIY users have more options in the project design. It is fully compatible with Bluno...
Delivered by Fri 19 Jun
Gravity: Analog Turbidity Sensor For Arduino
SKU: DF-SEN0189 | Brand: DFRobot
The Gravity Analog Turbidity Sensor measures water clarity by detecting the level of suspended particles. It works by measuring light transmittance and scattering rate, which change with the amount of total suspended ...
Delivered by Tue 30 Jun
Little Bird Lorikeet WS2812B Rainbow Board with Right Angle Header
SKU: LB-LORI-RT | Brand: Little Bird
Description The Little Bird Lorikeet is an RGB LED strip 5 programmable LEDs. This Australian made board uses the WS2812B LED (better known as NeoPixels). This Raspberry Pi HAT has a chain-able design means you ca...
Delivered by Fri 19 Jun
Crack the Code V2.0 kit no Arduino or Shield
SKU: LB-CTC-2-KIT-NO-ARDUINO | Brand: Little Bird
Dive into the world of coding and electronics with the Crack the Code V2.0 Kit! This kit is designed to provide a hands-on learning experience, perfect for educators and students looking to explore essential concepts ...
Delivered by Fri 19 Jun
Gravity: Analog Water Pressure Sensor
SKU: DF-SEN0257 | Brand: DFRobot
The Gravity Analog Water Pressure Sensor measures water or gas pressure and outputs a linear 0.5–4.5 V analogue signal proportional to the applied pressure (0–1.6 MPa). Using the DFRobot Gravity 3-pin interface, it co...
Delivered by Fri 19 Jun
TCS3200 RGB Color Sensor For Arduino
SKU: DF-SEN0101 | Brand: DFRobot
An RGB colour sensor breakout board based on the TAOS TCS3200 chip, with four built-in white LEDs for illumination. The TCS3200 can detect and measure a wide range of visible colours by converting light intensity to a...
Delivered by Tue 30 Jun
SparkFun Inventor's Kit - v4.1.2
SKU: SF-KIT-21301 | Brand: SparkFun
A note for SparkFun Inventor's Kit v4.1 users: The only change that was made from the SIK v4.1 to the SIK v4.1.2 is our new carrying case. All of the internal parts and instructional guide have remained the same!&nbs...
Delivered by Tue 30 Jun
Gravity: Non-contact IR Temeperature Sensor For Arduino
SKU: DF-SEN0206 | Brand: DFRobot
INTRODUCTION We can divide temperature measurement in to two types: contact and non-contact. Contact measurement can only accurately measure temperature when the testing object and the se...
Delivered by Tue 30 Jun
Gravity: MCP23017 IIC 16 Digital IO Expansion Module
SKU: DF-DFR0626 | Brand: DFRobot
This is an IO expansion module that based on the chip MCP23017. The module can expand additional 16 IOs. It can set 8 IIC addresses, which means with this module, the microcontroller can connect 8 modules, and expand ...
Delivered by Fri 19 Jun
Capacitive Touch Kit For Arduino
SKU: DF-DFR0129 | Brand: DFRobot
A capacitive touch sensor kit for Arduino based on the MPR121 touch controller. Includes three interchangeable touch pads — a scroll wheel, a keypad with backlight support, and a grid pad for gesture and pattern recog...
Delivered by Fri 19 Jun
PIR (motion) sensor
SKU: AF-189 | Brand: Adafruit
PIR sensors are used to detect motion from pets/humanoids from about 20 feet away (possibly works on zombies, not guaranteed). This one has an adjustable delay before firing (approx 2-4 seconds), adjustable sensiti...
Delivered by Fri 19 Jun
TCS34725 RGB Color Sensor For Arduino
SKU: DF-SEN0212 | Brand: DFRobot
The TCS34725 is an I2C RGB colour sensor that detects the red, green, and blue components of light in its environment and returns digital colour values. With high sensitivity, a wide dynamic range, and a built-in IR b...
Delivered by Fri 19 Jun
4 channel 5V relay module with light coupling 5V
SKU: LB-LR0051 | Brand: Little Bird
A 4-channel relay module with opto-isolated inputs for safe, reliable switching of high-power loads. Each relay is rated for up to 10A at 250VAC or 30VDC, making it suitable for controlling lights, motors, heaters, an...
Delivered by Fri 19 Jun
Photo cell (CdS photoresistor)
SKU: AF-161 | Brand: Adafruit
CdS cells are little light sensors. As the squiggly face is exposed to more light, the resistance goes down. When its light, the resistance is about 5-10KΩ, when dark it goes up to 200KΩ. To use, connect one side o...
Delivered by Fri 19 Jun
Bluno Mega 2560 - An Arduino Mega 2560 with Bluetooth 4.0
SKU: DF-DFR0323 | Brand: DFRobot
The Bluno Mega 2560 combines the ATmega2560 microcontroller with an integrated TI CC2540 Bluetooth 4.0 (BLE) module, bringing wireless communication to the Arduino Mega form factor. It supports wireless programming ov...
Delivered by Tue 30 Jun
Bluno Nano - An Arduino Nano with Bluetooth 4.0
SKU: DF-DFR0296 | Brand: DFRobot
The Bluno Nano combines an Arduino Nano-compatible ATmega328 microcontroller with an integrated TI CC2540 Bluetooth 4.0 (BLE) module in a compact 53 × 19 mm form factor. It enables wireless communication, wireless pro...
Delivered by Fri 19 Jun
RPLIDAR A1M8 - 360 Degree Laser Scanner Development Kit
SKU: DF-DFR0315 | Brand: DFRobot
FEATURESAPPLICATIONSSPECIFICATIONSNote: It has been newest Model: A1M8 --2017/5/15 DOCUMENTS SLAMTEC Website Development Kit SDK & Datasheet Related Rplidar Review by Gavin (@MechatronicsGuy) ICP-SLAM based on Rob...
Delivered by Fri 19 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
