New Arrivals

SKU: SF-DEV-15164 | Brand: SparkFun

The SparkFun Qwiic OpenLog is an I²C-based data logger that stores serial data to a microSD card. Based on the popular OpenLog, this version replaces the serial interface with I²C and Qwiic connectors, allowing you to...

SKU: SF-DEV-15083 | Brand: SparkFun

The SparkFun Qwiic Twist is a digital RGB rotary encoder breakout with built-in I²C interface. It handles all interrupt management, switch debouncing, and LED PWM internally, presenting encoder position, button state,...

SKU: AF-1374 | Brand: Adafruit

This breakout board is the simplest way to create a project with a single "momentary" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sens...

SKU: PI-COM1700 | Brand: Pimoroni

The AM2320 is a digital temperature and humidity sensor with an I2C interface. Its straightforward I2C communication makes it easy to connect to any Raspberry Pi or Arduino, and it works alongside other I2C sensors an...

SKU: LB-LS1026 | Brand: Little Bird

The CJMCU-MPU9150 is a 9-axis motion tracking breakout board based on the InvenSense MPU-9150 System in Package (SiP). It combines a 3-axis gyroscope, 3-axis accelerometer, and 3-axis digital compass (magnetometer) in...

SKU: DF-SEN0248 | Brand: DFRobot

DFRobot BME680 Environmental Sensor is a low power gas, pressure, temperature & humidity sensor based on BOSCH BME680 sensor. It is a 4-in-1 multi-functional MEMS environmental sensor which integrates VOC (Volatil...

SKU: AF-3709 | Brand: Adafruit

The Adafruit SGP30 is a multi-pixel MOX (metal-oxide) gas sensor from Sensirion that measures Total Volatile Organic Compounds (TVOC) and equivalent CO2 (eCO2) for indoor air quality monitoring. With fully calibrated ...

SKU: SF-SEN-12064 | Brand: SparkFun

The HTU21D is a low-cost, easy to use, highly accurate, digital humidity and temperature sensor. This sensor is ideal for environmental sensing and data logging and perfect for a weather stations or humidor control sy...

SKU: PL-2739 | Brand: Pololu

The Pololu AltIMU-10 v5 is a compact inertial measurement unit (IMU) and altimeter that combines a gyroscope, accelerometer, magnetometer, and barometric pressure sensor on a single board. It provides ten independent ...

SKU: PL-1634 | Brand: Pololu

The MQ-3 is a semiconductor gas sensor that detects alcohol vapour at concentrations from 0.04 mg/L to 4 mg/L — a range suitable for building a breathalyser. It provides a simple analog voltage output that requires on...

SKU: PL-2490 | Brand: Pololu

This sensor is a carrier/breakout board for ST’s VL53L0X laser-ranging sensor, which measures the range to a target object up to 2 m away. The VL53L0X uses time-of-flight measurements of infrared pulses for rangi...

SKU: DF-SEN0132 | Brand: DFRobot

INTRODUCTION This is an Arduino Carbon Monoxide Sensor. It uses MQ7 probe to detect Carbon Monoxide (CO) concentrations in the air from 20 to 2000ppm. The sensitivity ca...

SKU: SF-SEN-08880 | Brand: SparkFun

The MQ-3 is an alcohol gas sensor suitable for detecting alcohol concentration in the air, similar to a breathalyser. It provides an analog resistive output based on alcohol concentration, with high sensitivity and fa...

SKU: SF-DEV-08777 | Brand: SparkFun

Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C. Doing an analog to dig...

SKU: SF-SEN-11827 | Brand: SparkFun

RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-12LA, a very simpl...

SKU: DF-SEN0168 | Brand: DFRobot

This Triple Axis Accelerometer with Bosch BMA220 is an ultra small triaxial, low-g acceleration sensor breakboard with SPI and I2C interface, aiming for low power consumer market applications. It allows measurem...

SKU: DF-TEL0073 | Brand: DFRobot

Bluno Bee is a serial to bluetooth 4.0 module, it adopts XBEE form factor which is compact and is compatible with all shields with XBEE socket. Bluno Bee is designed to have voltage regulator which supports bot...

SKU: SF-SEN-13322 | Brand: SparkFun

The SparkFun Soil Moisture Sensor is a simple breakout for measuring the moisture in soil and similar materials. The soil moisture sensor is pretty straight forward to use. The two large exposed pads function as probe...

SKU: AF-334 | Brand: Adafruit

If you've got a resistive touch screen that you'd like to use, you'll need this breakout! It has a fine pitch (0.5mm) connector soldered onto it and it's broken out into the 4 resistive wires of the panel. A petite...

SKU: SF-SEN-13266 | Brand: SparkFun

The SparkFun MAX31855K Thermocouple Breakout is a simple 14-bit resolution, SPI-compatible, serial interface thermocouple digitizer that makes reading a wide range of temperatures possible. A thermocouple works by ...