New Arrivals

SKU: AF-1427 | Brand: Adafruit

The Adafruit 16×8 LED Matrix Driver Backpack is a breadboard-friendly breakout for the HT16K33 multiplexed LED driver. Unlike the pre-configured LED backpacks, this version breaks out all 16 anode and 8 cathode pins, ...

SKU: AF-3929 | Brand: Adafruit

Cut through cardboard like butter with the Canary Box Cutter. This Japanese-made tool is perfectly engineered, way better than using scissors or a craft knife.This is the perfect tool for cardboard-crafting-trashbot e...

SKU: DF-DFR0491 | Brand: DFRobot

The Gravity IO Expansion Shield breaks out all GPIO pins from the LattePanda into Gravity-compatible 3-pin colour-coded connectors, providing plug-and-play access to hundreds of Gravity sensors and modules. Each pin i...

SKU: AF-481 | Brand: Adafruit

This chrome-plated metal pushbutton is built tough and looks great doing it. Simply drill a 16mm hole into any panel up to 12.7 mm thick, drop it in, and tighten the included nut — a rubber gasket keeps water out of y...

SKU: AF-1459 | Brand: Adafruit

This inductive charging set provides wireless power transfer using a split-transformer design. The transmitter coil is powered with 9–12 V DC, and the receiver coil outputs 3.3 V DC — no direct wire connection between...

SKU: AF-3720 | Brand: Adafruit

Praise the sun! You will never have that awkward situation where your caliper battery dies just when you need to take a measurement. Sure, if you have the budget, we recommend these near-indestructable high-end Mitut...

SKU: AF-3702 | Brand: Adafruit

How many pockets does an OTG (On The Go) maker need to carry their boards, wires, miscellanea when away from their desk? The world may never know. Instead of chucking your Raspberry Pi or Metro M0 Ex...

SKU: AF-3701 | Brand: Adafruit

How many pockets does an OTG (On The Go) maker need to carry their boards, wires, miscellanea when away from their desk? The world may never know. Instead of chucking your Raspberry Pi or Metro M0 Ex...

SKU: AF-3670 | Brand: Adafruit

High-conductive heating fabrics are Literally! This non-woven fabric feels a little like felted paper but is filled with conductive material that can make the fabric emit heat when powered. Resistive heating fabrics s...

SKU: AF-1381 | Brand: Adafruit

This breakout board is the ultimate companion for the VLSI VS1053B DSP codec chip. The VS1053 can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). It can al...

SKU: AF-1505 | Brand: Adafruit

A clean, rounded 16mm panel-mount momentary pushbutton in black. This normally-open micro-switch connects the contacts only while pressed, making it a straightforward input for any project enclosure or control panel. ...

SKU: MR-BAR | Brand: Modular Robotics

This cubelet displays the block’s value as a light-up bar graph. The value is normalized to the number of points on the bar graph so that a maximum value results in a fully-lit bar graph. Cubelets are magneti...

SKU: MR-BLUETOOTH | Brand: Modular Robotics

The Bluetooth Cubelet contains a tiny Bluetooth radio that you can pair with your Android device or PC. With the Cubelets Control app running on your Android device, you can override Action Cubelets and remote control...

SKU: DF-TEL0116 | Brand: DFRobot

A long-range, low-data-rate radio modem pair based on the Semtech SX1276 LoRa transceiver. Operating on the 433 MHz ISM band, these modules deliver robust wireless links with excellent sensitivity and low power consum...

SKU: MR-CB-KT-DRIVE-1 | Brand: Modular Robotics

The Drive Cubelet is an action block in the Cubelets robot construction system. It contains a motor and roller wheels that move along a horizontal surface — higher input values drive it faster, while a value of zero b...

SKU: MR-CB-KT-BATTERY-1 | Brand: Modular Robotics

The Battery Cubelet provides energy to power a construction. It contains two rechargeable batteries and a small power switch. The batteries are removed from the Cubelet for charging, so if you keep a few batt...

SKU: DF-TEL0114 | Brand: DFRobot

LoRa MESH Radio Module is a high performance, low power, long-range micro-power RF module, using a distributed ad-hoc network communication mode, embedded wireless MESH MANET protocols, users do not need to do any...

SKU: AF-1657 | Brand: Adafruit

Get started with Adafruit GEMMA with this lovely starter kit! Included is everything you need to make a basic project. There's a GEMMA board, four sewable bright RGB pixels, a battery holder and batteries, 2-p...

SKU: AF-1430 | Brand: Adafruit

Put on your sunglasses before plugging in this shield — 40 eye-blistering RGB LEDs adorn the NeoPixel Shield for a blast of configurable colour. Arranged in a 5×8 matrix, each pixel is individually addressable using j...

SKU: AF-1794 | Brand: Adafruit

When you need to switch a lot of power, P channel MOSFETs are best for the job. These P-FETs can switch over 60V and 25A (with proper heat-sinking) and are TO-220 package so they fit nicely into any breadboard or perf...