New Arrivals

SKU: AF-285 | Brand: Adafruit

This weatherproof RGB LED flexi-strip features 30 LEDs per metre on a white PCB backing with a silicone weatherproof coating and 3M adhesive on the reverse. The entire strip is controlled as one unit — drive the R, G,...

SKU: AF-297 | Brand: Adafruit

Need some really bright LEDs? We are big fans of these clear red LEDs, in fact we use them exclusively in our kits. They are very bright and have about 20degree LED beam. They go easily into a breadboard and will add ...

SKU: SF-COM-11270 | Brand: SparkFun

This DC Blower really moves some air! Pulling about 1Amp @ 12VDC, this blower is rated at 16CFM (although it seems like more to us). We’ve used this blower to build small hovercrafts and to cool off on a hot day, they...

SKU: SF-DEV-11224 | Brand: SparkFun

This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for fa...

SKU: DF-KIT0011 | Brand: DFRobot

INTRODUCTION If you want to start playing with sensors, this sensor kit for arduino will be the perfect choice for you to get started. It comes with bundle of the most popular DFRobot sensors...

SKU: SF-WRL-13225 | Brand: SparkFun

The SparkFun XBee Explorer Serial is an RS232 serial base unit for configuring and communicating with XBee modules. Compatible with all XBee modules including Series 1, Series 2.5, standard, and Pro versions. Simply p...

SKU: AF-3201 | Brand: Adafruit

Wireless is wonderful, but sometimes you need the strong reliability of a wired connection. The Ethernet FeatherWing adds quick and easy wired Internet to any Feather board — just plug in a standard Ethernet cable and...

SKU: AF-381 | Brand: Adafruit

This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC ...

SKU: SF-ROB-13177 | Brand: SparkFun

The Micro Gripper Kit B is a compact robotic gripper designed for small-scale robotics projects. It works with any sub-micro size Hitec servo (not included) and features the standard 0.77" hub mount pattern for easy i...

SKU: AF-364 | Brand: Adafruit

The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (s...

SKU: AF-3218 | Brand: Adafruit

Fire up your engines because these are the hot-rods of toggle switches! Equipped with an aerodynamic red protective casing, and a red LED at the tip of the switch, this Red LED Toggle Switch is sure&nbs...

SKU: SF-PRT-10927 | Brand: SparkFun

These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. The black nylon will give your project a very sessy loo...

SKU: DF-KIT0018 | Brand: DFRobot

The DFRobot Gravity Intermediate Kit for Arduino takes you beyond the basics with a comprehensive set of sensors, modules, and an Arduino-compatible board. Starting with simple LED projects and progressing to more com...

SKU: SF-TOL-10865 | Brand: SparkFun

There’s nothing worse than getting ready for a good hack and then realizing that you can’t even get the box open because you don’t have the right screwdriver. Sure, we all have a few Phillips-head drivers and maybe a ...

SKU: SF-PRT-13054 | Brand: SparkFun

A 2×20 shrouded (boxed) header designed to match the Raspberry Pi GPIO pinout. It provides a keyed, polarised connection point so you can run a ribbon cable from your Pi's GPIO to a breakout board, HAT prototype, or c...

SKU: DF-DFR0213 | Brand: DFRobot

The Dreamer Nano V4 is a surface mount breadboard embedded version of the ATMEGA 32U4 with integrated Micro USB. It has everything that Arduino Leonardo has (electrically).Physically, it is just missing power jack ...

SKU: DF-FIT0414 | Brand: DFRobot

This is a handy cables kit for WTRnode users. It contains a USB to TTL cable which allows for a simple way to connect TTL interface devices to USB, and a WRTnode dedicated network cable. WRTnode(A Mini Op...

SKU: AF-2590 | Brand: Adafruit

The Adafruit Metro Mini 328 packs the same ATmega328P power as a full-sized Metro into a tiny breadboard-friendly form factor. Running at 16 MHz with 5V logic, it's pin-compatible with Arduino UNO R3 and works with th...

SKU: SF-TOL-10603 | Brand: SparkFun

You can tell by our large assortment of tweezers that we here at SparkFun are way into picking up tiny things. To make sure we’re always up to date on the latest in ‘tweezing’ technology, we’re always buying and te...

SKU: AF-518 | Brand: Adafruit

An ultra-bright 1 W cool white LED pre-mounted on an aluminium PCB heatsink, making it easy to solder and integrate into projects. With 90 lumens output in a 140° lambertian pattern, it delivers bright, even illuminat...