New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
5mm Plastic Flat LED Holder - Pack of 5
SKU: AF-2175 | Brand: Adafruit
Keep your 5 mm LEDs securely mounted with these lightweight plastic LED holders featuring a flat finish. Simply slot the LED through the opening and it snaps into place — no tools or hardware needed. The flat bezel si...
Delivered by Fri 21 Aug
USB Type-A Jack
SKU: AF-2225 | Brand: Adafruit
This is just a standard USB-A jack. It's a sturdy metal with 4 pins in the back and 2 small mounting tabs that make it easy to use in your next USB projectWe use this USB-A jack for everything, really. With a li...
Delivered by Fri 21 Aug
IDC Breakout Helper - 2x5 (10 pin)
SKU: AF-2102 | Brand: Adafruit
This 2×5 (10-pin) IDC breadboard helper makes it easy to connect standard 10-pin IDC ribbon cables to a breadboard or Perma-Proto board. The two-piece design consists of a pin-through socket that straddles the centre ...
Delivered by Fri 21 Aug
2mm 10 pin Socket Headers (for XBee) - Pack of 2
SKU: AF-366 | Brand: Adafruit
These 2 mm pitch 10-pin socket headers are designed specifically for XBee modules, which use 2 mm pin spacing instead of the standard 2.54 mm (0.1″) pitch. Each pack includes two sockets — one for each side of the XBe...
Delivered by Fri 21 Aug
LED Voltage Meter (Blue)
SKU: DF-DFR0130-B | Brand: DFRobot
This is a standalone DC voltage meter. It measures 3V-30V with 1% accuracy. Best suited for battery level display. Just apply two wires on the power without any extra circuit or components, it gives the reading st...
Delivered by Fri 21 Aug
Gravity: Digital Green LED Light Module
SKU: DF-DFR0021-G | Brand: DFRobot
This green LED light module has a shiny white color. It is ideal for Arduino starter. This module can be easy to be plugged on IO/Sensor expansion shield. NOTE: This LED is wired to light up when the Signal pin i...
Delivered by Fri 21 Aug
Gravity: Digital Blue LED Light Module
SKU: DF-DFR0021-B | Brand: DFRobot
This Blue LED light module has a shiny white color. It is ideal for Arduino starters. This module can be easy to be plugged on IO/Sensor expansion shield. NOTE: This LED is wired to light up when the Signal p...
Delivered by Fri 21 Aug
6xAA Battery Holder with DC2.1 Power Jack
SKU: DF-FIT0141 | Brand: DFRobot
A 6×AA battery holder with a DC 2.1mm power jack that plugs directly into an Arduino's barrel jack input. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells. Features mounti...
Delivered by Fri 21 Aug
Micro Metal Gearmotor Extended Bracket (Pair)
SKU: DF-FIT0160 | Brand: DFRobot
This compact bracket enables convenient mounting of popular micro metal gearmotors. The plastic bracket encloses the otherwise exposed gears, and the mounting tabs capture the nuts for easy installation. This v...
Delivered by Fri 21 Aug
Qwiic JST Connector - SMD 4-pin
SKU: SF-PRT-14417 | Brand: SparkFun
Here is a tiny 4-pin Qwiic 1mm JST connector. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based device compatible with the Qwiic system!Additionally, this connector w...
Delivered by Fri 21 Aug
Adafruit BMP280 I2C or SPI Barometric Pressure Altitude Sensor
SKU: AF-2651 | Brand: Adafruit
The BMP280 from Bosch is a precision barometric pressure and temperature sensor, and the next-generation upgrade to the BMP085/BMP180/BMP183 family. With support for both I2C and SPI communication, it offers flexibili...
Delivered by Fri 21 Aug
38W DC-DC Converter 7.5V@5A
SKU: DF-FIT0168 | Brand: DFRobot
A waterproof DC-DC step-down converter that takes 11–35V DC input (compatible with 12V and 24V systems) and outputs a regulated 7.5V at up to 5A (38W). The sealed, shockproof enclosure and 96% efficiency make it well ...
Delivered by Fri 21 Aug
micro:bit Battery Holder - 2xAA (JST-PH)
SKU: SF-PRT-14299 | Brand: SparkFun
This is a unique two-cell AA battery holder built specifically for the BBC micro:bit. The 6" (~150mm) cable has been terminated with a JST-PH connector. The connector mates the JST socket on the micro:bit perfectly...
Delivered by Fri 21 Aug
10 sets M3 * 20 nylon standoffs
SKU: DF-FIT0182 | Brand: DFRobot
A 10-pack of M3 × 20mm nylon standoffs with matching screws and nuts. Nylon standoffs are non-conductive, making them ideal for isolating circuit boards from metal chassis or other conductive surfaces without risking ...
Delivered by Fri 21 Aug
Gravity:Digital Piranha LED Module - Green
SKU: DF-DFR0031-G | Brand: DFRobot
This is a Piranha LED light module. A digital pin (LOW on, HIGH off) is used to control it. The brightness of LED can be controller via PWM output. APPLICATIONS DIY Projects Toys Games Audio indicator SPECIFICATIONS...
Delivered by Fri 21 Aug
USB OTG Cable - Female A to Micro B - 5in
SKU: SF-CAB-14276 | Brand: SparkFun
USB On-The-Go (OTG) is a really useful USB specification! It allows some small devices that would normally be unable to act as a host to have limited hosting capabilities! USB OTG is common for things like tablet c...
Delivered by Fri 21 Aug
Toggle Switch
SKU: SF-COM-09276 | Brand: SparkFun
This heavy-duty SPST toggle switch provides simple on/off control for power circuits and panel-mounted applications. Rated for 2 A at 250 V AC or 4 A at 125 V AC, it's suitable for both mains-voltage and low-voltage p...
Delivered by Fri 21 Aug
SparkFun Triple Axis Accelerometer Breakout - ADXL335
SKU: SF-SEN-09269 | Brand: SparkFun
Breakout board for the 3 axis ADXL335 from Analog Devices. This is the latest in a long, proven line of analog sensors - the holy grail of accelerometers. The ADXL335 is a triple axis MEMS accelerometer with extremely...
Delivered by Fri 21 Aug
LED - RGB Diffused Common Cathode
SKU: SF-COM-09264 | Brand: SparkFun
Ever hear of a thing called RGB? Red, Green, Blue? How about an RGB LED? These 5mm units have four pins - Cathode is the longest pin. One for each color and a common cathode. Use this one LED for three status indicato...
Delivered by Fri 21 Aug
Battery Holder - 2xAAA with Cover and Switch
SKU: SF-PRT-14219 | Brand: SparkFun
A 2×AAA battery holder with a sliding cover and built-in ON/OFF switch. The cover keeps batteries secure, and the switch provides convenient power control for your project. Wire leads are approximately 150 mm long wit...
Delivered by Fri 21 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared