New Arrivals

SKU: JU-R-E185 | Brand: Jubly-Umph

When the going gets tough, it can be really hard to remember that you're tough too. When you've come too far to give up now, this little lapel pin will be there to remind to keep your head down, and keep charging. ...

SKU: SF-SEN-19096 | Brand: SparkFun

The SparkFun BME688 Environmental Sensor is a breakout that combines a gas scanning sensor with temperature, humidity, and barometric pressure sensing for a complete environmental sensor in a single package. The ga...

SKU: JU-R-E97 | Brand: Jubly-Umph

You understand the 'slings and arrows of outrageous fortune', that's why we made this lapel pin: As a little reminder that the slings and arrows are the point of the whole thing. This pin is for those who've run out o...

SKU: JU-R-E86 | Brand: Jubly-Umph

Not all battles are loud, violent and gory. Some are quiet, intense, and invisible. People frequently forget that sometimes the most difficult struggles are internal, so here's a lapel pin for those whose struggle ...

SKU: DF-SEN0522 | Brand: DFRobot

This human body sensing switch adopts an infrared detection way to control load switch. It offers a detection range of 5~8m, high sensitivity, and reliability. The sensor has an adjustable delay function and the ...

SKU: DF-SEN0501 | Brand: DFRobot

This multifunctional environmental sensor comprises SHTC3 temperature & humidity sensor, BMP280 barometric pressure sensor, VEML7700 ambient light sensor, and ML8511 UV sensor into one and offers 5 kinds of environmen...

SKU: SF-PRT-18769 | Brand: SparkFun

This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover as well as an ON/OFF switch that can be used to control power to your project. The ...

SKU: AF-5357 | Brand: Adafruit

This double-row 2×17 (34-pin) IDC box header with 2.54 mm (0.1″) pitch is commonly used for floppy disk drive interfaces and other legacy 34-pin IDC ribbon cable connections. The keyed box header ensures correct cable...

SKU: AF-5281 | Brand: Adafruit

An Alpha 5K linear potentiometer with right-angle PC mount pins spaced at 0.2" — perfect for plugging directly into a breadboard or perfboard during prototyping. When you're ready for a permanent build, mount it to a ...

SKU: AF-5355 | Brand: Adafruit

Adding LEDs to anything makes it 5x better -- it's a scientific fact! But when you have LEDs, you've got wires and power supplies and all that stuff is kinda annoying. What if you could have LEDs that light up without...

SKU: WS-21179 | Brand: Waveshare

A compact WiFi development board based on the ESP32-S2 single-core Xtensa LX7 processor, running at up to 240MHz with 2.4GHz WiFi connectivity. Available in multiple variants — with or without an onboard 0.96" IPS LCD...

SKU: WS-21358 | Brand: Waveshare

Turn an M.2 SATA SSD into a portable USB-C flash drive. This compact adapter accepts M.2 NGFF (B-key / B+M-key) SSDs and connects to any USB-C port at USB 3.2 Gen 2 speeds — up to 6 Gbps (limited by SATA III interface...

SKU: DF-TEL0140 | Brand: DFRobot

A simple 433 MHz RF wireless switch set that transmits digital signals between a transmitter and receiver module. Based on Gravity interface connectors, it works with any microcontroller that can read and write digita...

SKU: DF-SEN0487 | Brand: DFRobot

This tiny MEMS microphone has an amplifier gain of 66. When there is no sound detected, it outputs voltage around 0.66*VCC. When speaking, you can easily get the acoustic waveform by ADC sampling. The module can be us...

SKU: DF-DFR0806 | Brand: DFRobot

With bass and treble tone independent control, this powerful Bluetooth Amplifier has AM interference and filtering function that makes the board THD as low as 0.1% even when working for a long time at large power outp...

SKU: DF-DFR0847 | Brand: DFRobot

This 0.96″ 160×80 Colour TFT Display delivers vibrant 16-bit (RGB565) colour output in an ultra-compact form factor. With an edge-to-edge design and a tiny 13.5 × 34 mm footprint, it is well suited for wearable device...

SKU: DF-FIT0864 | Brand: DFRobot

These solderless 4-pin snap-down connector cables make it easy to bridge a gap between two pieces of cuttable RGB LED strip without soldering. Each cable has a snap-down connector on both ends with a wire in between, ...

SKU: AF-5214 | Brand: Adafruit

Here's an easy solution for keeping your micro HDMI ports free from dust and other unsavory particulates. These squishy Silicone Micro HDMI Dust Cover Inserts slip neatly into any computer or device with an HDMI socke...

SKU: AF-4893 | Brand: Adafruit

These incredibly small surface-mount NeoPixel LEDs measure just 3.2 × 1.0 × 1.48mm, making them perfect for projects where space is at a premium. Each LED contains red, green, and blue elements with a built-in driver ...

SKU: AF-4922 | Brand: Adafruit

This 1.25 mm pitch 2-pin cable is a compact, Molex PicoBlade-compatible connector cable for projects where standard 0.1″ headers are too bulky. At 20 cm long, it provides a convenient connection length for internal wi...