New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
Children's Telescope
SKU: SA-620916 | Brand: Little Bird
A colourful, child-friendly telescope with 5× magnification — perfect for exploring nature, spotting wildlife, and observing the moon. The compact, extendable design makes it easy to carry on outdoor adventures. Buil...
Delivered by Tue 23 Jun
Romeo ESP32-S3 Development Board for Robotics FPV RC Car
SKU: DF-DFR0994 | Brand: DFRobot
Romeo ESP32-S3 is a high-performance development board specifically designed forrobotics projects. It utilizes the ESP32-S3 microcontroller and is equipped with an onboard camera that enables video transmission and...
Delivered by Tue 23 Jun
Useful Sensors Tiny Code Reader
SKU: SF-SEN-23352 | Brand: SparkFun
QR codes are a great way for users to communicate with microcontrollers, whether it’s passing WiFi credentials to set up connectivity or sending personal information to fill out a digital badge. Reading them from a ma...
Delivered by Tue 23 Jun
Arduino GIGA R1 WiFi Development Board
SKU: DF-DFR1056 | Brand: DFRobot
Note: The Arduino GIGA R1 WiFi Development Board is available for pre-order and is expected to be shipped in late September. This Arduino GIGA R1 WiFi Development Board measures only 101 x 53mm and has the same for...
Delivered by Tue 23 Jun
40kg.cm Metal Serial Bus Servo, High Precision And Large Torque, With Programmable 360 Degrees Magnetic Encoder and Brushless Motor
SKU: WS-24702 | Brand: Waveshare
The Waveshare ST3025 is a high-performance metal serial bus servo featuring a brushless motor, steel gearbox, and 360° programmable magnetic encoder. With up to 40 kg·cm of torque at 12V, it is built for demanding rob...
Delivered by Tue 23 Jun
Fermion: MEMS Smoke Gas Detection Sensor (Breakout, 10-1000ppm)
SKU: DF-SEN0570 | Brand: DFRobot
Fermion: MEMS Smoke Gas Detection Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal heat...
Delivered by Tue 23 Jun
Fermion: MEMS Ammonia NH3 Gas Detection Sensor (Breakout, 1-300ppm)
SKU: DF-SEN0567 | Brand: DFRobot
Fermion: MEMS Ammonia NH3 Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minim...
Delivered by Tue 23 Jun
10 Position Header Connector 0.100" (2.54mm) Through Hole, Right Angle Gold
SKU: LB-732-2865-ND | Brand: Little Bird
A 10-position single-row right-angle header with gold-plated pins at standard 2.54mm (0.1") pitch. Through-hole mounting for PCB soldering, with pins oriented at 90° for horizontal mating with female connectors or jum...
Delivered by Tue 23 Jun
Cockatoo - Micro:bit simple screw-terminal breakout
SKU: LB-COCKATOO | Brand: Little Bird
The Cockatoo is a simple screw-terminal breakout board for the BBC micro:bit. Slide your micro:bit into the edge connector and you get secure screw terminal access to pins 0, 1, 2, 3.3V, and GND — no soldering or croc...
Delivered by Tue 23 Jun
Fucking Legend Lapel Pin
SKU: JU-W-LP246 | Brand: Jubly-Umph
Wear your achievements with pride. This bold lapel pin is a celebration of grit, resilience, and the courage to stand out — because getting where you are wasn't easy, and you've earned every bit of it. Crafted as a l...
Delivered by Tue 23 Jun
IT'S ALL GOING TO BE OKAY LAPEL PIN
SKU: JU-W-LP182 | Brand: Jubly-Umph
A colourful reminder that everything is going to work out. This limited edition hard enamel lapel pin from Jubly-Umph features a gold-backed finish and comes beautifully presented on a branded backing card. Pin it to...
Delivered by Tue 23 Jun
Adafruit CAN Bus FeatherWing - MCP2515
SKU: AF-5709 | Brand: Adafruit
The Adafruit CAN Bus FeatherWing adds CAN bus networking to any Feather board. It uses the MCP2515 CAN controller and TJA1051/3 transceiver to send and receive messages in standard or extended format at up to 1 Mbps o...
Delivered by Tue 23 Jun
SparkFun USB-C Host Shield
SKU: SF-DEV-21247 | Brand: SparkFun
The SparkFun USB-C Host Shield provides all the digital logic and analogue circuitry needed to add USB peripheral/host control to your Arduino. Interface with and control any USB 2.0 compatible device — thumb drives, ...
Delivered by Tue 23 Jun
Gravity: CH423 I2C 24 Digital IO Expansion Module
SKU: DF-DFR0979 | Brand: DFRobot
The Gravity CH423 I2C 24 Digital IO Expansion Module extends your microcontroller with 24 additional digital output/input pins over a standard I2C connection. Based on the CH423 chip, it provides 8 GPIOs with interrup...
Delivered by Tue 23 Jun
Woven USB A Cable with Magnetic Tips - Micro B, Type C, and iOS
SKU: AF-5652 | Brand: Adafruit
Some days we're feeling extra fancy here at the 'fruit warehouse, and we have a big soft spot for woven fabric cables. Like, peep this fully reversible pink/purple Blinka-inspired cable or this mithril-like 3-in-1 Syn...
Delivered by Tue 23 Jun
Snap Action 1-to-1 Wiring Block Connector - Pack of 5
SKU: AF-5619 | Brand: Adafruit
Snap action blocks are perfect when you have to quickly wire up a bunch of free-hanging components, and you don't want to solder. They're much easier to use than wire nuts, and of course, they are reusable and do not ...
Delivered by Tue 23 Jun
Gravity: Liquid Flow Sensor (G3/4)
SKU: DF-SEN0551 | Brand: DFRobot
This Gravity: liquid flow sensor is designed based on the electromagnetic principle. It adopts O-ring rubber seal and uses silicone sealant at the outlet end to strength water-resistance. With high anti-interference a...
Delivered by Tue 23 Jun
JST-XH Extension Cable - 2.5mm Pitch - 500mm long
SKU: AF-5497 | Brand: Adafruit
We now have a handy extension cord for JST-XH projects! One end has a JST-XH socket, and the other has a matching plug. Between the two, 500mm of color-coded wire. This solid 2.5mm pitch connector exten...
Delivered by Tue 23 Jun
Red Micro Potentiometer Knob - 4 pack
SKU: AF-5532 | Brand: Adafruit
Have you found yourself in a maze of twisty-turny knobs, all alike? These micro potentiometer (or rotary encoder) knobs offer a rainbow burst of color to your synth or control panel. They are made of a hard plast...
Delivered by Tue 23 Jun
Arducam Camera Module V3 with Autofocus
SKU: SF-SEN-19512 | Brand: SparkFun
The Arducam Camera Module V3 delivers 16MP autofocus imaging for Raspberry Pi projects, powered by the Sony IMX519 sensor. With twice the resolution of the V2 camera module, it's an affordable yet high-performance opt...
Delivered by Tue 23 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
