New Arrivals

SKU: DF-DFR0647 | Brand: DFRobot

A compact 0.91-inch monochrome OLED display module with 128×32 white self-illuminating pixels, driven by the SSD1306 over I2C. The chip-on-back pad design and ultra-narrow PCB (41 × 12 mm) make it ideal for wearables,...

SKU: AF-4488 | Brand: Adafruit

The Adafruit LIS2MDL is a triple-axis magnetometer (compass) breakout from ST, capable of sensing magnetic fields across a wide ±50 gauss (±5000 µT) range with no range configuration required. It's ideal for detecting...

SKU: EC-SEM0001T | Brand: Elecrow

*micro:bit not includedElecrow Crowtail Learning Starter Kit for Micro:bit 2.0 Graphical Programming DIY Program Modules with 20 Lessons for Beginners DescriptionThe elecrow start kit for Micro: bit can work with...

SKU: EC-DRA43145S | Brand: Elecrow

This black acrylic case is designed to house and protect the official Raspberry Pi 7-inch touchscreen display. It consists of three layers of acrylic plate with two triangular support brackets, creating a stable, free...

SKU: AF-4489 | Brand: Adafruit

Run two solenoids, or a single DC motor with up to 800mA per channel using the super-simple L9110H H-bridge driver. This bridge chip is an 8 DIP package so it's easy to fit onto any breadboard or perfboard.Each chip c...

SKU: LB-TILT | Brand: Little Bird

A simple tilt sensor module that detects orientation changes. When tilted, the internal conductive ball breaks the circuit; when returned upright, it reconnects — providing a digital output signal. It's a compact, low...

SKU: EF-EF09085 | Brand: ElecFreaks

SKU: EF-EF03423 | Brand: ElecFreaks

The Ring:bit expansion board is a simple PCB for the micro:bit. The Ring:bit extends the micro:bit's 3 GPIO ports. We will use this module to convert the P0/P1/P2 port to the common GVS port. It can be loaded 3 AAA ba...

SKU: DF-DFR0625 | Brand: DFRobot

ESP32-PICO-KIT is a mini IoT development board with functionalities of WiFi and Bluetooth. With a size of 52x 20.3x10mm, the module integrates a 4 MB SPI flash, and a USB-UART Bridge circuit, allowing the developer...

SKU: EF-EF04092 | Brand: ElecFreaks

The Octopus Light Sensor Brick reads the ambient light level of its surrounding environment and outputs an analog signal. The 3-pin GVS connector makes it easy to plug into micro:bit expansion boards, Arduino, and oth...

SKU: DF-DFR0231-H | Brand: DFRobot

Gravity: UART & I2C NFC Module adopts NXP PN532, a highly integrated NFC communication controller, which supports various types of NFC smart cards or tags like the commonly used MIFARE Classic series and NTAG series i...

SKU: LB-EAGLED-MOMENTARY | Brand: Little Bird

A pack of 10 low-profile momentary push buttons designed for e-textile and wearable electronics projects. Each button features large sewing holes and flat connection pads with no sharp edges, making them comfortable t...

SKU: LB-JSTBOARD | Brand: Little Bird

This E-textiles board is a breakout for a JST, so you can sew it onto a garment or use it in Paper Circuits! The JST breakout board can be easily sewn through the large holes. For paper circuits, simply apply coppe...

SKU: LB-LS1347 | Brand: Little Bird

This 22-in-1 repair tool kit provides everything you need to open and disassemble smartphones, tablets, and other small electronics. Whether you're replacing a cracked screen, swapping a battery, or simply exploring w...

SKU: DF-FIT0612 | Brand: DFRobot

A 2-metre addressable RGB LED strip using WS2812 LEDs on a black flexible PCB. Each of the 120 LEDs is individually controllable via a single data line, supporting 24-bit colour (16.7 million colours) with 256 brightn...

SKU: DF-SEN0290 | Brand: DFRobot

Gravity: Lightning Sensor employs AMS innovative AS3935 Franklin lightning sensor IC and Coilcraft MA5532-AE dedicated antenna to detect lightning distance, intensity, and frequency within a radius of 40km both indoor...

SKU: DF-FIT0613 | Brand: DFRobot

This 2-metre WS2812 addressable RGB LED strip features 120 individually controllable LEDs on a flexible white PCB. Each LED supports 256 brightness levels per colour channel (16.7 million colours) and is driven by a s...

SKU: SF-CAB-15426 | Brand: SparkFun

USB-C is fantastic. What makes this cable even better is that one of the features we love so much about USB-C has been replicated to the USB-A 2.0 plug! These cables have minor, yet genius modifications that allow ...

SKU: DF-MBT0005 | Brand: DFRobot

Micro: IO-BOX is a micro:bit multifunctional expansion board with on-board Li-ion battery power, delicate appearance and easy to use. We integrated numerous functions on the 6cm×6cm board such as 2-way driver motor, 9...

SKU: LB-BUZZER | Brand: Little Bird

This is a small buzzer for use with E-Textiles. Use 2 I/O pins on the Buzzer main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusi...