New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
Patch Test Hook (10 Pack)
SKU: DF-FIT0720 | Brand: DFRobot
These patch test hooks provide a solderless way to make signal and low-current connections between boards, sensors, and modules. The hook clips grab onto pins, pads, and component legs — perfect for prototyping with c...
Delivered by Tue 25 Aug
Crowtail Starter Kit for Arduino
SKU: EC-SEA0001T | Brand: Elecrow
The Crowtail Starter Kit for Arduino is a beginner-friendly electronics kit built around the Crowduino Uno-SD board and the Crowtail modular connector system. With 22 plug-and-play modules and over 20 guided tutorials...
Delivered by Tue 25 Aug
ST-LINK V2 Emulator and Debugger
SKU: EC-DPO01117E | Brand: Elecrow
The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate ...
Delivered by Tue 25 Aug
EagLED - Sewable Electronics Kit E-Textile Snippable Board with Buzzer
SKU: LB-EAGLED-BUZZ-KIT | Brand: Little Bird
The EagLED is Little Bird Electronics' own Arduino-compatible wearable development kit, designed from the ground up for e-textile projects. It packs a microcontroller, LEDs, light sensor, push button, and buzzer onto ...
Delivered by Tue 25 Aug
Adafruit MS8607 Pressure Humidity Temperature PHT Sensor - STEMMA QT / Qwiic
SKU: AF-4716 | Brand: Adafruit
The Adafruit MS8607 is a factory-calibrated 3-in-1 sensor that measures barometric pressure, relative humidity, and temperature over I2C. Made by TE Connectivity, this PHT (Pressure, Humidity, Temperature) sensor is a...
Delivered by Tue 25 Aug
Dual Channel H-Bridge Motor Shield-V1.5
SKU: EC-ACS70028DH | Brand: Elecrow
The Dual Channel H-Bridge Motor Shield is composed of 2 discrete MOSFET H-bridge, designed to drive two DC motor with max current 8A. It is made up of 8 N-channel MOSFET IRF3205S and 4 pcs of half bridge motor control...
Delivered by Tue 25 Aug
Nano 168 (Arduino Compatible)
SKU: EC-MCA03168A | Brand: Elecrow
The Nano 168 is a compact, breadboard-friendly Arduino-compatible development board based on the ATmega168 microcontroller. It offers the same functionality as the Arduino Nano in a small DIP form factor, with 14 digi...
Delivered by Tue 25 Aug
Hobby Motor with Encoder - Metal Gear (DG01D-E)
SKU: SF-ROB-16413 | Brand: SparkFun
The DG01D-E is a single hobby motor with a hall speed encoder. This motor requires a voltage between 3-9V, has a gearbox ratio of 1:48 and a speed of 90RPM at 4.5V. The voltage between positive and negative is dete...
Delivered by Tue 25 Aug
Starter Kit for Raspberry Pi Zero/Zero W
SKU: EC-DRA09012K | Brand: Elecrow
An accessory kit for the Raspberry Pi Zero and Zero W that provides adapters and headers to expand the board's compact connectors to full-size interfaces. Includes a clear acrylic case, USB OTG cable, Mini HDMI adapte...
Delivered by Tue 25 Aug
E-Textiles LilyTiny Compatible ATTiny board
SKU: LB-TINY | Brand: Little Bird
The CJMCU card is a small microcontroller based on the ATTiny85 chipset. It is perfect for wearable projects. Also widely used in electronic projects due to its compatibility with the Arduino IDE, bringing an ATtiny85...
Delivered by Tue 25 Aug
Screwdriver for E-Textiles M1.4 screw
SKU: LB-KEY-SCREW | Brand: Little Bird
These handy little screwdrivers can be used with our E-Textile boards to add and remove the M1.4 screws to access the coin cell battery.The screwdriver comes on a handy keyring so you can carry it round.These are also...
Delivered by Tue 25 Aug
Zio Qwiic OLED Display (1.5inch, 128x128)
SKU: SF-LCD-15890 | Brand: SparkFun
The Zio Qwiic OLED Display is a 1.5" (38 mm) monochrome OLED module with a 128×128 pixel resolution, capable of displaying up to 16 lines of text as well as graphics and animations. Two Qwiic (JST-SH) connectors on th...
Delivered by Tue 25 Aug
Octopus Analog UV sensor (GUVA-S12SD)
SKU: EF-EF04093 | Brand: ElecFreaks
Octopus Analog UV sensor (GUVA-S12SD) is the UV electric brick in our Octopus series, the basic design is from the Octopus electric bricks and the setting of its outlook, the PCB fixing hole and the connectors are the...
Delivered by Tue 25 Aug
Adafruit MPU-6050 6-DoF Accel and Gyro Sensor - STEMMA QT Qwiic
SKU: AF-3886 | Brand: Adafruit
The Adafruit MPU-6050 breakout combines a 3-axis accelerometer and 3-axis gyroscope in a single compact sensor, providing 6 degrees of freedom (6-DoF) motion sensing over I2C. A proven and popular IMU, the MPU-6050 is...
Delivered by Tue 25 Aug
3xAA Battery Holder
SKU: DF-FIT0610 | Brand: DFRobot
This enclosed battery holder takes 3× AA batteries in series, providing approximately 4.5V from alkaline cells or 3.6V from NiMH/NiCd rechargeables. It features a built-in on/off switch and a sliding, removable cover ...
Delivered by Tue 25 Aug
Potentiometer Module
SKU: LB-LS1673 | Brand: Little Bird
This Potentiometer Module is from our Micro:bit 24 bit kit. You're probably already familiar with using a potentiometer as they are commonly found on many electrical devices, such as in audio equipment where they a...
Delivered by Tue 25 Aug
Coloured Eye Stickers
SKU: LB-EYE-COLOUR | Brand: Little Bird
Looking for something extra to jazz up your papercraft, cardboard or robotics project? We spy with our little eyes these Coloured Eye Stickers - they'll will make an excellent addition to your craft supplie...
Delivered by Tue 25 Aug
2 x AA Battery Holder with On/Off Switch JST PH Connector
SKU: AF-4193 | Brand: Adafruit
A slim 2×AA battery holder with a built-in on/off switch and genuine JST PH connector. Two AA batteries in series provide approximately 3V — ideal for powering low-voltage electronics projects, microcontrollers, and p...
Delivered by Tue 25 Aug
Octopus Soil Moisture Sensor Brick
SKU: EF-EF04027 | Brand: ElecFreaks
Octopus Soil Moisture Sensor Brick can read the amount of moisture present in the soil surrounding it. It's a low tech sensor, but ideal for monitoring an urban garden, or your pet plant's water level. This is a mu...
Delivered by Tue 25 Aug
Bee-Bot Swarm
SKU: ED-EL00396 | Brand: Edtechs
A classroom set of six rechargeable Bee-Bot programmable robots with a docking station. Bee-Bot's simple, child-friendly keypad is an ideal starting point for teaching control, directional language, and programming to...
Delivered by Tue 25 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared