New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
Desoldering Pump
SKU: DF-FIT0216 | Brand: DFRobot
A compact, spring-loaded desoldering pump (solder sucker) for removing solder from PCB joints and through-holes. The ProsKit DP-366D features a double oil-sealed piston for guaranteed leak-free suction and a soft foam...
Delivered by Mon 26 Oct
Rotary Encoder
SKU: SF-COM-09117 | Brand: SparkFun
This is a 12-step rotary encoder with a nice ‘clicking’ feel. It’s breadboard friendly, and has a pretty handy select switch (by pushing in on the knob). The encoder is different from a potentiometer in that an enc...
Delivered by Mon 26 Oct
Mini Photocell
SKU: SF-SEN-09088 | Brand: SparkFun
This is a very small light sensor. A photocell changes (also called a photodetector, photo resistor, CdS or photoconductive cell) resistance depending on the amount of light it is exposed to. These little sensors make...
Delivered by Mon 26 Oct
Battery Holder 4xAA with Cover and Switch
SKU: SF-PRT-12083 | Brand: SparkFun
This 4xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF swi...
Delivered by Mon 26 Oct
SparkFun RJ11 Breakout
SKU: SF-BOB-14021 | Brand: SparkFun
This is the SparkFun RJ11 Breakout, two simple breakout boards for the common 6-pin RJ11 connector. These little boards can easily have one of our RJ11 6-Pin Connectors to work with common telephone cables. Each bo...
Delivered by Mon 26 Oct
3mm LED Pack (50 pcs)
SKU: DF-FIT0244 | Brand: DFRobot
A pack of 50 basic 3mm LEDs in five colours — 10 each of red, green, yellow, white, and blue. Handy for prototyping, indicator lights, and Arduino projects. Specifications Forward Voltage – 1.8–2.2V Max Current – ...
Delivered by Mon 26 Oct
2mm 10pin XBee Socket
SKU: SF-PRT-08272 | Brand: SparkFun
This 2 mm pitch 10-pin socket mates with XBee radio modules from Digi, allowing you to mount your XBee without soldering it directly to a PCB. You'll need two of these sockets to connect to all 20 pins on an XBee modu...
Delivered by Mon 26 Oct
LED - Basic Red 3mm
SKU: SF-COM-00533 | Brand: SparkFun
LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very standard red LED. The lens is 3mm in diameter, and is diffused.
Delivered by Mon 26 Oct
Gravity: Digital 5A Relay Module For Arduino
SKU: DF-DFR0017 | Brand: DFRobot
The DFRobot Relay Module is a standard relay used with a controller board to interface external electrical circuits or modules. Some of the most common applications with Arduino are: Home lighting, electrical appli...
Delivered by Mon 26 Oct
Stranded-Core Wire Spool - 25ft - 22AWG - Red
SKU: AF-3068 | Brand: Adafruit
This wire is flexible, strong, and super easy to solder, too! Stranded core wire is best used for wiring jigs where theres bending or movement expected. Works well with terminal blocks as well. It's not great for ...
Delivered by Mon 26 Oct
Slide Pot - Small (10k Linear Taper)
SKU: SF-COM-11620 | Brand: SparkFun
A compact linear-taper slide potentiometer rated at 10 kΩ and 0.1 W. This small slider features solder tab connections, a 20 mm travel distance, and two mounting holes for easy installation. Key Features Linear Tap...
Delivered by Mon 26 Oct
Photo cell (CdS photoresistor)
SKU: AF-161 | Brand: Adafruit
CdS cells are little light sensors. As the squiggly face is exposed to more light, the resistance goes down. When its light, the resistance is about 5-10KΩ, when dark it goes up to 200KΩ. To use, connect one side o...
Delivered by Mon 26 Oct
Jumper Wires 7.8 F/M (High Quality 30 Pack)
SKU: DF-FIT0365 | Brand: DFRobot
INTRODUCTION Premium quality jumper wires for prototyping. Made with 26AWG multi-strand wire and sturdy male pins. Each jumper wire is approximately 210mm in length. Each pack comes with 30 jumper wires in a...
Delivered by Mon 26 Oct
LED - Basic Blue 5mm x 100
SKU: SF-COM-11372 | Brand: SparkFun
LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very basic 5mm LED with a blue lens. It has a typical forward voltage of 3.4V and ...
Delivered by Mon 26 Oct
Diffused LED - White 10mm
SKU: SF-COM-11121 | Brand: SparkFun
Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft, diffuse glow.Features: 3.0-3.4VDC Forward Voltage 20mA Forward Current 40 degree viewing angle 150-180 MCD output ...
Delivered by Mon 26 Oct
Bluno Nano - An Arduino Nano with Bluetooth 4.0
SKU: DF-DFR0296 | Brand: DFRobot
The Bluno Nano combines an Arduino Nano-compatible ATmega328 microcontroller with an integrated TI CC2540 Bluetooth 4.0 (BLE) module in a compact 53 × 19 mm form factor. It enables wireless communication, wireless pro...
Delivered by Mon 26 Oct
Bluno Link - A USB Bluetooth 4.0 (BLE) Dongle
SKU: DF-TEL0087 | Brand: DFRobot
Add bluetooth 4.0 to your PC, Mac directly with this USB BLE-Link. It uses the USB package which is compact and compatible with v2.1 and earlier, and also supports the latest v4.0/Bluetooth Low Energy. Now you coul...
Delivered by Mon 26 Oct
Gravity: Arduino DC Fan Module
SKU: DF-DFR0332 | Brand: DFRobot
Make an air aerial propeller vessel, a cooling system, or spinning machine with this small fan module. It comes with a propeller, a 15,000 rpm motor and cable. Add flavor to your own interesting projects with this ...
Delivered by Mon 26 Oct
LED Rainbow Pack - 5mm PTH
SKU: SF-COM-12903 | Brand: SparkFun
Sometimes when you have too many choices, it’s hard to make a good decision. In fact, there are times when you just want a bag of LEDs, just one of each, that’s all you want. Well too bad, you are getting two of each!...
Delivered by Mon 26 Oct
Screw Terminals 2.54mm Pitch (2-Pin)
SKU: SF-PRT-10571 | Brand: SparkFun
These are simple 2-position screw terminals with 2.54mm pitch pins. Rated up to 150V @ 6A, this terminal can accept 30 to 18AWG wire. The 2.54mm pitch will line up with standard 0.1" perf boards.Documents: Datasheet
Delivered by Mon 26 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared