New Arrivals

SKU: EF-EF08256 | Brand: ElecFreaks

The micro:bit Smart Health Kit has a well-selection of the Sensor:bit, Analog UV Sensor, PIR Sensor, MQ3 Alcoholic Sensor Brick, Servo and etc., we could use it to build such themes as the UV light detections, the ...

SKU: LB-LS1697 | Brand: Little Bird

This is the Light and Colour Sensor, a small breakout board with a built in APDS-9960 sensor that offers ambient light and colour measuring, proximity detection, and touch-less gesture sensing. With this Light...

SKU: SF-WRL-17841 | Brand: SparkFun

A compact wide-band internal antenna covering 700–2700 MHz, suitable for 4G LTE, LoRa, BLE, and other RF applications. The FPC radiator element connects via a 100mm coaxial cable with an IPEX (u.FL equivalent) connect...

SKU: EC-ASW51001E | Brand: Elecrow

The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100ethernet chip . The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up...

SKU: EC-ACC05010A | Brand: Elecrow

This 1.5-meter-long wire will perfectly match the input port of your raspberry pi 4! Support transfer 720P/1080i/1080P Full HD 4K 60Hz high-definition video.High-quality material, 24K gold-plated connector, strong cor...

SKU: AF-4528 | Brand: Adafruit

A 100 mm adapter cable that bridges the gap between Grove and STEMMA QT / Qwiic ecosystems. One end features a Grove connector, the other a JST SH (STEMMA QT / Qwiic compatible) connector — making it easy to mix and m...

SKU: LB-CTC-CAPS | Brand: Little Bird

These are two pin jumpers (also called shunts) that will create an electrical connection for the 2.54mm(0.1") male pin headers.  The Crack the Code shield uses these on the buzzer module.  These little j...

SKU: EF-EF08203 | Brand: ElecFreaks

The Smart Science IoT Kit from ElecFreaks is a comprehensive sensor and IoT learning kit built around the IoT:bit breakout board for micro:bit. It combines environmental sensors with WiFi connectivity, allowing studen...

SKU: AF-3870 | Brand: Adafruit

A compact push-button toggle switch — press once to turn on, press again to turn off. Often called a "flashlight switch" due to its common use in small torches, this latching switch is ideal as a power switch or mode ...

SKU: LB-00185 | Brand: Little Bird

A 10-wire splittable ribbon jumper cable with female (socket) connectors on both ends. Each wire is colour-coded and can be peeled apart individually or in groups to suit your wiring needs. At 300mm (30cm) long, they'...

SKU: LB-CTCREP | Brand: Little Bird

Already run the Crack the Code Unit of Work and want to replenish your component box and student sets? At Little Bird Electronics we have put together a replenishment kit for your Crack the Code unit of work. &nbsp...

SKU: SF-PRT-14492 | Brand: SparkFun

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 1K ohm resistors make excellent pull-ups, pull-downs and current limiters....

SKU: AF-1063 | Brand: Adafruit

A well-designed electret microphone amplifier breakout built around the Maxim MAX4466 op-amp, specifically engineered for microphone amplification with excellent power supply noise rejection. The board comes fully ass...

SKU: AF-1314 | Brand: Adafruit

A 3-inch (76.2 mm) speaker cone with 4 Ω impedance and 3 W power handling. Four mounting tabs spaced 60 mm apart make it easy to secure in enclosures or project housings. Pairs well with Class D amplifier boards for c...

SKU: LB-BAG | Brand: Little Bird

A reusable carry bag that folds up into the shape of a bird — compact enough to clip onto your keys or a larger bag so you always have it when you need it. A handy, eco-friendly alternative to single-use plastic bags....

SKU: PRT-BK-12043 | Brand: Little Bird

This white Mini Breadboard is a great way to prototype your small projects! With 170 tie points there’s just enough room to build and test simple circuits; They’re also great for breaking out DIP package ICs to jum...

SKU: AF-1643 | Brand: Adafruit

Round and round they go! 12 ultra-bright smart RGB NeoPixels are arranged in a compact circle with a 37 mm (1.5″) outer diameter. Each LED is individually addressable from a single microcontroller pin, delivering 24-b...

SKU: AF-70 | Brand: Adafruit

Just about all electronics use TTL serial for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore. This is a USB to TTL serial cable, with a FTDI FT232RL...

SKU: AF-2342 | Brand: Adafruit

The Adafruit Audio FX Mini Sound Board is a standalone audio trigger that plays WAV and OGG Vorbis files — no Arduino or programming required. Simply drag and drop sound files over USB, wire up buttons to the trigger ...

SKU: DF-FIT0110 | Brand: DFRobot

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel ...