New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
M38 Wireless Bluetooth MP3 Audio Receiver board BLT 4.2 Mp3
SKU: LB-PT-M38 | Brand: Little Bird
A compact Bluetooth 4.2 audio receiver module (MH-M18) that streams two-channel stereo audio wirelessly from your phone, tablet, or other Bluetooth device. Once paired, it delivers lossless audio playback with a conne...
Delivered by Fri 21 Aug
Mini HDMI to HDMI Cable
SKU: DF-FIT0543 | Brand: DFRobot
A 1.5 m Mini HDMI to standard HDMI cable for connecting devices with a Mini HDMI port to monitors, TVs, and projectors. Gold-plated connectors resist oxidation for reliable, long-lasting connections, and the shielded ...
Delivered by Fri 21 Aug
Rotary Encoder Module
SKU: LB-LR0024 | Brand: Little Bird
The rotary encoder is an electro-mechanical switch. Its output signal can be used to determine the direction that its knob is being rotated. Not only that, but it is also capable of continuous rotation, unlike a regul...
Delivered by Fri 21 Aug
Adafruit Feather M4 Express - Featuring ATSAMD51 - ATSAMD51 Cortex M4
SKU: AF-3857 | Brand: Adafruit
The Feather M4 Express is built around the ATSAMD51J19, a 120 MHz Cortex M4 processor with hardware floating point and DSP instructions, 512 KB flash, and 192 KB RAM. It ships with CircuitPython pre-loaded — plug it i...
Delivered by Fri 21 Aug
Premium Jumper Wire 50-Piece Rainbow Assortment M-M 6
SKU: PL-1702 | Brand: Pololu
These premium jumper wires are stranded 26 AWG wires with male terminations on both ends, for use with 0.1″ (2.54 mm) fefemale headers, connectors, and solderless breadboards and breadboards. The assortm...
Delivered by Fri 21 Aug
Massive Arcade Button with LED - 100mm Yellow
SKU: AF-1186 | Brand: Adafruit
OMG WATCH OUT! This 100mm diameter arcade button with a 16mm deep plastic base is so massive and inviting it may collapse upon itself and form a black hole from which not even light can escape! Until it does, howev...
Delivered by Fri 21 Aug
Learn to solder - DIY Heart Shaped Three Colors LED Flashing Light
SKU: LB-LR0555 | Brand: Little Bird
A great little project to help you learn to solder. This DIY heart shaped light up project comes with 18 bright LEDs to solder onto the board. They form a flashing pattern that repeats.
Delivered by Fri 21 Aug
E-textiles LED Module Green Single
SKU: LB-ETEXTILELED-G | Brand: Little Bird
This is a simple single unit GREEN E-Textile LEDEach unit can be sewn into fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)!These are a thicker PCB t...
Delivered by Fri 21 Aug
E-textiles LED Module White Single
SKU: LB-ETEXTILELED-W | Brand: Little Bird
A sewable white LED module designed for e-textile projects. This single-unit LED can be stitched directly into fabric using conductive thread, making it easy to add illumination to wearable electronics and textile-bas...
Delivered by Fri 21 Aug
Pulse sensor Module Heart Rate Sensor
SKU: LB-LR0214-37 | Brand: Little Bird
Other Features: Voltage: 3V / 5V; Amplification factor: 330; Wavelength: 609nm; A product for Arduino.1 x Pulse sensor Pulse Heart Rate Sensor Module
Delivered by Fri 21 Aug
160 pcs 5mm 8 Colours Tactile Push Button
SKU: LB-LS0199 | Brand: Little Bird
A colourful assortment of 160 miniature tactile push buttons in eight different colours, neatly organised in a handy storage container. Perfect for adding colour-coded inputs to your electronics projects. Key Feature...
Delivered by Fri 21 Aug
Alligator to Jumper Female 20cm 10 pin
SKU: LB-LR0293-29 | Brand: Little Bird
These compact jumper cables feature a premium female header on one end and a grippy mini alligator clip on the other — perfect for breadboarding with non-header-friendly boards and components. Clip onto a micro:bit, C...
Delivered by Fri 21 Aug
Alligator to Jumper Male 20cm 10 pin
SKU: LB-LR0293-30 | Brand: Little Bird
These compact jumper cables feature a premium male header pin on one end and a grippy mini alligator clip on the other — perfect for breadboarding with non-header-friendly boards and components. Clip onto a micro:bit,...
Delivered by Fri 21 Aug
Third Hand
SKU: SF-TOL-09317 | Brand: SparkFun
This is a solderer’s best helper, the third hand. Comes with a heavy base, two alligator clips, a soldering iron holder, and a good magnifying glass. Note that we don’t normally need a third hand. It’s nice, but so...
Delivered by Fri 21 Aug
SparkFun Logic Level Converter - Bi-Directional
SKU: SF-BOB-12009 | Brand: SparkFun
The SparkFun Bi-Directional Logic Level Converter safely translates signals between different voltage levels — stepping 5V down to 3.3V and 3.3V up to 5V on the same channel. It also works with 2.8V and 1.8V devices, ...
Delivered by Fri 21 Aug
Gravity: 16A Relay Module For Arduino
SKU: DF-DFR0251 | Brand: DFRobot
A relay is an electrically operated switch, which has a control system (also known as the input circuit) and the controlled system (also known as the output circuit), usually used in automatic control circuit. It i...
Delivered by Fri 21 Aug
Half-size breadboard
SKU: AF-64 | Brand: Adafruit
This is a cute half size breadboard, good for small projects. It's 2.2" x 3.4" (5.5 cm x 8.5 cm) with a standard double-strip in the middle and two power rails on both sides. You can pull the power rails off easily to...
Delivered by Fri 21 Aug
Arduino and Breadboard Holder
SKU: SF-DEV-11235 | Brand: SparkFun
The Arduino and Breadboard Holder is a sturdy plastic base plate that keeps your Arduino and breadboard neatly organised during prototyping. The board mounts with two included screws using the standard Arduino mountin...
Delivered by Fri 21 Aug
Wheel - 65mm (Rubber Tire, Pair)
SKU: SF-ROB-13259 | Brand: SparkFun
These are a pair of basic, 65mm wheels with black rubber tires. These wheels are the same ones designed to fit onto DAGUs right angle gear motors utilized in the Magician Chassis and RedBot Kit. With these wheels you ...
Delivered by Fri 21 Aug
Waterproof DS18B20 Sensor Kit
SKU: DF-KIT0021 | Brand: DFRobot
A waterproof DS18B20 digital temperature sensor kit with everything you need to connect to an Arduino. The stainless steel probe measures temperatures from -55°C to +125°C over a 1-Wire interface, requiring just one d...
Delivered by Fri 21 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared