New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
micro:bit Battery Holder - 2xAA (JST-PH)
SKU: SF-PRT-14299 | Brand: SparkFun
This is a unique two-cell AA battery holder built specifically for the BBC micro:bit. The 6" (~150mm) cable has been terminated with a JST-PH connector. The connector mates the JST socket on the micro:bit perfectly...
Delivered by Tue 27 Oct
Screw Terminal Block: 3-Pin, 5 mm Pitch, Side Entry (4-Pack)
SKU: PL-2441 | Brand: Pololu
These side-entry screw terminal blocks have a pitch of 5 mm (0.197″). Each block has three terminals for the stripped ends of 22 – 14 AWG wires, and units can slide together to make longer strips. They ar...
Delivered by Tue 27 Oct
10 sets M3 * 20 nylon standoffs
SKU: DF-FIT0182 | Brand: DFRobot
A 10-pack of M3 × 20mm nylon standoffs with matching screws and nuts. Nylon standoffs are non-conductive, making them ideal for isolating circuit boards from metal chassis or other conductive surfaces without risking ...
Delivered by Tue 27 Oct
Adafruit Silicon MEMS Microphone Breakout - SPW2430
SKU: AF-2716 | Brand: Adafruit
The Adafruit SPW2430 Silicon MEMS Microphone Breakout is a compact, low-cost microphone module that detects sound and converts it to an analog voltage — no external bias resistor or amplifier needed. With a frequency ...
Delivered by Tue 27 Oct
Gravity:Digital Piranha LED Module - Green
SKU: DF-DFR0031-G | Brand: DFRobot
This is a Piranha LED light module. A digital pin (LOW on, HIGH off) is used to control it. The brightness of LED can be controller via PWM output. APPLICATIONS DIY Projects Toys Games Audio indicator SPECIFICATIONS...
Delivered by Tue 27 Oct
2mm Pitch 25-Pin Female Socket Headers - Pack of 5
SKU: AF-2672 | Brand: Adafruit
These 2 mm pitch 25-pin female socket headers are perfect for connecting to modules and boards that use 2 mm pin spacing instead of the standard 2.54 mm (0.1″) pitch. Each pack includes five 25-pin strips that can be ...
Delivered by Tue 27 Oct
USB OTG Cable - Female A to Micro B - 5in
SKU: SF-CAB-14276 | Brand: SparkFun
USB On-The-Go (OTG) is a really useful USB specification! It allows some small devices that would normally be unable to act as a host to have limited hosting capabilities! USB OTG is common for things like tablet c...
Delivered by Tue 27 Oct
Toggle Switch
SKU: SF-COM-09276 | Brand: SparkFun
This heavy-duty SPST toggle switch provides simple on/off control for power circuits and panel-mounted applications. Rated for 2 A at 250 V AC or 4 A at 125 V AC, it's suitable for both mains-voltage and low-voltage p...
Delivered by Tue 27 Oct
SparkFun Triple Axis Accelerometer Breakout - ADXL335
SKU: SF-SEN-09269 | Brand: SparkFun
Breakout board for the 3 axis ADXL335 from Analog Devices. This is the latest in a long, proven line of analog sensors - the holy grail of accelerometers. The ADXL335 is a triple axis MEMS accelerometer with extremely...
Delivered by Tue 27 Oct
LED - RGB Diffused Common Cathode
SKU: SF-COM-09264 | Brand: SparkFun
Ever hear of a thing called RGB? Red, Green, Blue? How about an RGB LED? These 5mm units have four pins - Cathode is the longest pin. One for each color and a common cathode. Use this one LED for three status indicato...
Delivered by Tue 27 Oct
AVR Programming Cable
SKU: SF-DEV-09215 | Brand: SparkFun
This is a handy AVR programming cable that incorporates both the 10-pin and 6-pin ISP programming interfaces.Cable is about 12" long.
Delivered by Tue 27 Oct
Universal Pre-Punched Experimenters Board - Large
SKU: TB-HP9554 | Brand: Little Bird
A versatile prototyping board with a doughnut-pad layout for building electronic circuits. Each pad is separated from its neighbours by approximately 0.5 mm, providing electrical isolation while making it easy to brid...
Delivered by Tue 27 Oct
Battery Holder - 2xAAA with Cover and Switch
SKU: SF-PRT-14219 | Brand: SparkFun
A 2×AAA battery holder with a sliding cover and built-in ON/OFF switch. The cover keeps batteries secure, and the switch provides convenient power control for your project. Wire leads are approximately 150 mm long wit...
Delivered by Tue 27 Oct
SparkFun Mini Screwdriver
SKU: SF-TOL-09146 | Brand: SparkFun
This is just your basic reversible screwdriver - pocket sized! Both flat and phillips heads available. Comes with pin clip and snazzy SparkFun logo.
Delivered by Tue 27 Oct
Pololu Carrier for MQ Gas Sensors (Bare PCB Only)
SKU: PL-1479 | Brand: Pololu
This carrier board is designed to work with any of the MQ-series gas sensors, simplifying the interface from 6 to 3 pins—ground, power and analog voltage output—that are broken out with a 0.1" spacing, making the boar...
Delivered by Tue 27 Oct
Interface Cable SMA to U.FL
SKU: SF-WRL-09145 | Brand: SparkFun
This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. Documents: Datasheet RF Connector Buying Guide
Delivered by Tue 27 Oct
Crash sensor (Left)
SKU: DF-SEN0138-L | Brand: DFRobot
A compact crash sensor (left-side variant) based on a miniature snap-action micro switch with roller lever. Designed for Arduino and compatible microcontrollers, this sensor module includes an onboard pull-up resistor...
Delivered by Tue 27 Oct
USB to RS422/RS485 Cable
SKU: DF-FIT0272 | Brand: DFRobot
The USB 2.0 to RS422/RS485 Cable provides a simple and easy to connect between the USB and RS422/RS485 ports interface. Ideally for PC, thin client or servers to provide instant RS422/RS485 ports expansion via USB ...
Delivered by Tue 27 Oct
Hook-up Stranded Wire - Black (22 AWG)
SKU: SF-PRT-08867 | Brand: SparkFun
Standard 22 AWG stranded black wire. Use this for soldering wire or any project in which you need flexible wire. Stranded wire is recommended for projects where the wire has a bend or stress point. Comes in small spoo...
Delivered by Tue 27 Oct
Infrared Sensor Jumper Wire - 3-Pin JST
SKU: SF-SEN-08733 | Brand: SparkFun
Three pin JST connector with red, black, and yellow colors. 5 inch wire outs. This cable comes fully assembled as shown and connects directly to many different Sharp sensors. Quick and easy, this cable will save yo...
Delivered by Tue 27 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared