New Arrivals

SKU: AF-3399 | Brand: Adafruit

For many years, instructors and teachers have asked us to come up with a better way to teach programming and electronics. We have worked on Circuit Playground Express for over a year to come up with a board that is...

SKU: SF-DEV-09716 | Brand: SparkFun

This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same. This is a basic breakout board for the FTDI...

SKU: AF-828 | Brand: Adafruit

An inline flow sensor for measuring liquid or water flow in solar heating, computer cooling, irrigation, and other fluid projects. The sensor uses a pinwheel with a magnet and an external hall effect sensor to count r...

SKU: AF-3456 | Brand: Adafruit

This 5×AA battery holder delivers approximately 7.5V from five AA batteries, terminated with a 2.1mm DC barrel plug (centre positive). It provides the ideal voltage for Arduino boards and other development boards with...

SKU: SF-COM-09650 | Brand: SparkFun

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very standard green LED. The lens is 3mm in diameter, and is diffused.

SKU: AF-1955 | Brand: Adafruit

These Male/Male Jumper Wires are handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 20 (2 pieces of each of ten rainbo...

SKU: AF-2000 | Brand: Adafruit

Note: The Pro Trinket's bit-bang USB technique is a legacy approach that may not work reliably with modern operating systems. For new projects, consider an ItsyBitsy or Metro Mini board with native USB support at a c...

SKU: SF-CAB-09556 | Brand: SparkFun

This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable’s connector is composed of two rows of five 0.1" spaced pins; it’s also polarized, as is the mating connector on-b...

SKU: AF-2017 | Brand: Adafruit

Add a micro-slice standard solderless breadboard to your Perma-Proto or other perf-board. This 2x4 point solder-less breadboard is a good way to add some solderless prototyping space if you just need to have...

SKU: AF-858 | Brand: Adafruit

This is a great first stepper motor, good for small projects and experimenting with steppers. This uni-polar motor has a built in mounting plate with two mounting holes. There are only 32 step (11.25 degree) per revol...

SKU: DF-DFR0486 | Brand: DFRobot

The Gravity I²C OLED-2864 is a 0.96″ blue OLED display module driven by the SSD1306 controller. It communicates via I²C and refreshes at up to 60 Hz, making it ideal for real-time data readouts on Arduino and other mi...

SKU: SF-COM-09483 | Brand: SparkFun

A basic 4-digit 7-segment display in red. This common anode display features one decimal point per digit, plus individually controllable apostrophe and colon points — perfect for clocks, counters, and numeric readouts...

SKU: AF-3531 | Brand: Adafruit

The Adafruit 128×64 OLED Bonnet is a compact display add-on for Raspberry Pi, featuring a 1.3" diagonal monochrome OLED screen with a 5-way joystick and two pushbuttons. The high-contrast white OLED pixels are individ...

SKU: DF-DFR0064 | Brand: DFRobot

The DFRobot 386AMP audio amplifier module is based on the LM386 low-voltage audio power amplifier IC. With a fixed voltage gain of 26 dB (20× amplification) and static power consumption of only 24 mW at 6V, it's well ...

SKU: SF-COM-09479 | Brand: SparkFun

The LN298 is a high voltage, high current, dual full-bridge motor driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors. Comes in a stagge...

SKU: SF-COM-09420 | Brand: SparkFun

Resonators function like crystals, but are a lower cost solution that does not require external caps.These resonators are +/-0.5% or better from -20C-+80C. These resonators have built-in load capacitors so no external...

SKU: SF-PRT-09385 | Brand: SparkFun

A pack of 10 premium 12″ (30 cm) male-to-female jumper wires for breadboarding, prototyping, and connecting to 0.1″ pitch headers. Each wire has a male pin on one end and a female socket on the other, making them vers...

SKU: AF-3589 | Brand: Adafruit

The Adafruit PiUART is a compact add-on that provides USB serial console access and switchable power for your Raspberry Pi. It plugs directly onto the GPIO header and connects to your computer via a Micro-USB cable, g...

SKU: AF-5510 | Brand: Adafruit

nOOds are ultra-flexible LED filaments — the same type found inside decorative Edison-style LED bulbs, but available as standalone strips for your own projects. This 300 mm pink nOOd is made of dozens of parallel LED ...

SKU: SF-PRT-10588 | Brand: SparkFun

Simple breakout board for the 3.5mm audio jack. Use this breakout (shipped bare) to allow breadboard or SIP access to the super-common 3.5mm audio jack. All five pins are broken out.