New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
Carbon Monoxide Sensor (MQ7)
SKU: DF-FIT0227 | Brand: DFRobot
The MQ7 is a simple-to-use Carbon Monoxide (CO) sensor suitable for detecting CO concentrations in the air. It offers a wide detection range from 20 to 2000 ppm, making it ideal for safety monitoring and air quality p...
Delivered by Fri 19 Jun
Gas Sensor Breakout
SKU: SF-BOB-08891 | Brand: SparkFun
This breakout board provides a convenient PCB adapter for MQ-series gas sensors (MQ-3, MQ-4, MQ-6, MQ-7, and MQ-8). It converts the sensor's oversized, oddly-spaced pins into a standard breakout format that's easy to ...
Delivered by Fri 19 Jun
Infrared Proximity Sensor - Sharp GP2Y0A21YK
SKU: SF-SEN-00242 | Brand: SparkFun
The Sharp GP2Y0A21YK is an infrared proximity sensor with an analogue voltage output that varies with distance — from 3.1 V at 10 cm to 0.4 V at 80 cm. It uses an IR emitter and position-sensitive detector to measure ...
Delivered by Fri 19 Jun
Relay SPDT Sealed
SKU: SF-COM-00100 | Brand: SparkFun
These are high quality Single Pole - Double Throw (SPDT) sealed relays. Use them to switch high voltage, and/or high current devices. This relay’s coil is rated up to 12V, with a minimum switching voltage of 5V. The c...
Delivered by Fri 19 Jun
SHARP GP2Y0A41SKOF Infrared Distance Sensor (4-30cm)
SKU: DF-SEN0143 | Brand: DFRobot
This Infrared Proximity Sensor made by Sharp (model: GP2Y0A41SKOF) has an analog output which varies from 3.1V (4cm) to 0.3V (30cm) with a supply voltage between 4.5 and 5.5V DC. This sensor is great for sensing obje...
Delivered by Fri 19 Jun
PIR Motion Sensor (JST)
SKU: SF-SEN-13285 | Brand: SparkFun
This is a simple to use motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. If anything moves after that period, the ‘alarm’ pin will go low.This unit works great from 5...
Delivered by Fri 19 Jun
SparkFun RGB LED Breakout - WS2812B
SKU: SF-BOB-13282 | Brand: SparkFun
This is a breakout board for the WS2812B RGB LED. The WS2812B is actually an RGB LED with a WS2811 built right into the LED! All the necessary pins are broken out to 0.1" spaced headers for easy bread-boarding. Severa...
Delivered by Fri 19 Jun
SparkFun WiFi Shield - ESP8266
SKU: SF-WRL-13287 | Brand: SparkFun
The SparkFun ESP8266 WiFi Shield is an Arduino compatible shield for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi-related projects. There are a variety of designs based around the ...
Delivered by Fri 19 Jun
SparkFun RFID Reader Breakout
SKU: SF-SEN-13030 | Brand: SparkFun
The SparkFun RFID Reader Breakout converts the 2mm pin spacing of ID-series RFID readers to breadboard-friendly 0.1" headers. Compatible with the ID-3LA, ID-12LA, and ID-20LA readers, this board lets you solder the re...
Delivered by Fri 19 Jun
Gravity: Laser PM2.5 Air Quality Sensor For Arduino
SKU: DF-SEN0177 | Brand: DFRobot
The Gravity Laser PM2.5 Air Quality Sensor uses laser scattering to measure suspended particulate matter concentrations in the air. It detects particles from 0.3 to 10 µm in diameter and outputs digital concentration ...
Delivered by Fri 19 Jun
Gravity: Starter Kit for Arduino
SKU: DF-KIT0111 | Brand: DFRobot
The Gravity Starter Kit for Arduino is a plug-and-play electronics toolkit designed for beginners and makers getting started with the Arduino platform. It includes a DFRduino UNO R3 microcontroller (fully compatible w...
Delivered by Fri 19 Jun
Gravity: UART Infrared CO2 Sensor (0-50000ppm), air sensor
SKU: DF-SEN0220 | Brand: DFRobot
The Gravity UART Infrared CO2 Sensor uses non-dispersive infrared (NDIR) technology to measure carbon dioxide concentrations from 0 to 50,000 ppm. It offers excellent selectivity with no oxygen dependency, built-in te...
Delivered by Fri 19 Jun
SparkFun Line Sensor Breakout - QRE1113 (Digital)
SKU: SF-ROB-09454 | Brand: SparkFun
The SparkFun QRE1113 Line Sensor Breakout (Digital) is a compact IR reflectance sensor board that outputs a digital signal based on surface reflectivity. It uses a capacitor discharge circuit — the faster the 10 nF ca...
Delivered by Fri 19 Jun
LPG Gas Sensor - MQ-6
SKU: SF-SEN-09405 | Brand: SparkFun
A simple-to-use MQ-6 gas sensor for detecting liquefied petroleum gas (LPG) — primarily propane and butane — in the air. The sensor detects concentrations from 200 to 10,000 ppm with high sensitivity and fast response...
Delivered by Fri 19 Jun
Methane CNG Gas Sensor - MQ-4
SKU: SF-SEN-09404 | Brand: SparkFun
This is a simple-to-use compressed natural gas (CNG) sensor, suitable for sensing natural gas (composed of mostly Methane [CH4]) concentrations in the air. The MQ-4 can detect natural gas concentrations anywhere from ...
Delivered by Fri 19 Jun
BITCAR - Autonomous Line Following Obstacle Avoiding Car for micro:bit
SKU: SS-114991884 | Brand: Seeed Studio
The BitCar is a micro:bit-powered robot car kit featuring autonomous line following, ultrasonic obstacle avoidance, and remote control capabilities. Built around a sturdy chassis with two metal gear motors, the car in...
Delivered by Fri 19 Jun
8*8 dot matrix module
SKU: LB-LR0122 | Brand: Little Bird
This module consists of 64 LEDs with MAX7219 driver chip. It can control 64 LEDs by 16-bit data serial input and output. If you want to control it, you only need to control three IO ports. It support for cascading mul...
Delivered by Fri 19 Jun
Dual Fan with 1M USB cable - 70x70x15mm
SKU: LB-LS7583 | Brand: Little Bird
A compact dual-fan cooling module for enclosures, 3D-printed builds, network gear, and DIY electronics. Two matched 70×70×15mm fans provide effective airflow and heat dissipation, powered via USB for simple plug-and-g...
Delivered by Fri 19 Jun
All-in-one Starter Kit for ESP32-P4 with Common Board design, 16 Modules and AI Lessons
SKU: EC-SEE00804D | Brand: Elecrow
The All-in-one Starter Kit for ESP32-P4 is a complete learning platform built around Espressif's ESP32-P4, a high-performance 32-bit RISC-V dual-core microprocessor with powerful image and voice processing capabilitie...
Delivered by Fri 19 Jun
ESP32-P4 Development Board – 3.4" Round Touch Display, Wi-Fi 6, Bluetooth 5
SKU: WS-31523 | Brand: Waveshare
Transform your innovative projects with the ESP32-P4 Round Touch Display Development Board — your gateway to next-level interaction in the world of IoT. Whether you opt for the crisp clarity of the 3.4-inch, 800×800 r...
Delivered by Fri 19 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
