New Arrivals

SKU: LB-LR0062 | Brand: Little Bird

This IR sensor can detect obstacles in front of it.  When an object is detected the green indicator light on the board will light up. There is a low-level output signal on the OUT port.It has a detection range of...

SKU: LB-LS6503 | Brand: Little Bird

The VL53L0X Time-of-Flight (ToF) Laser Ranging Sensor is an advanced distance sensor module that provides highly accurate distance measurements using infrared laser technology. With a range of up to 2 meters, this com...

SKU: LB-LS0221 | Brand: Little Bird

The CJMCU-226 INA226 is a powerful voltage, current, and power monitoring module designed for high precision in both high-side and low-side sensing applications. With its bi-directional current sensing capability and ...

SKU: DF-SEN0308 | Brand: DFRobot

The Gravity Analogue Waterproof Capacitive Soil Moisture Sensor from DFRobot measures soil moisture using capacitive sensing rather than resistive probes, offering significantly better corrosion resistance and longer ...

SKU: SF-SEN-11050 | Brand: SparkFun

This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire i...

SKU: AF-1713 | Brand: Adafruit

Add an ear to your project with this well-designed electret microphone amplifier with AGC. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. For the amplification, we use th...

SKU: AF-746 | Brand: Adafruit

The Adafruit Ultimate GPS Breakout (Version 3) is a high-performance GPS module built around the MTK3339 chipset. With 66 channels, -165 dBm tracking sensitivity, and up to 10 Hz position updates, it delivers accurate...

SKU: SF-SEN-15901 | Brand: SparkFun

This Weather Meter Kit provides the three core sensors for a DIY weather station: an anemometer (wind speed), a wind vane (wind direction), and a rain gauge. All three sensors use passive magnetic reed switches rather...

SKU: DF-SEN0244 | Brand: DFRobot

The Gravity Analog TDS Sensor is an Arduino-compatible kit for measuring Total Dissolved Solids (TDS) in water. TDS indicates how many milligrams of soluble solids are dissolved per litre — the higher the value, the l...

SKU: AF-2831 | Brand: Adafruit

This Photo Transistor Light Sensor is a simple sensor that detects ambient light. It's kind of the opposite of an LED - when light hits the little chip inside, it induces current to flow from the long pin...

SKU: SF-SEN-10293 | Brand: SparkFun

A simple piezo element that can be used as both a sensor and a small audio transducer. When flexed or tapped, it generates a voltage that can be read by a microcontroller, making it ideal for knock and vibration detec...

SKU: WS-24370 | Brand: Waveshare

The LC76G is a multi-GNSS positioning module that supports GPS, BeiDou (BDS), GLONASS, Galileo, and QZSS satellite systems. It allows multi-system combined or single-system independent positioning for fast, accurate l...

SKU: AF-5396 | Brand: Adafruit

The Adafruit VL53L4CD is a Time-of-Flight (ToF) distance sensor from ST that combines short-range and medium-range sensing in one chip. It measures from approximately 1 mm right up to 1300 mm, bridging the gap between...

SKU: DF-SEN0257 | Brand: DFRobot

The Gravity Analog Water Pressure Sensor measures water or gas pressure and outputs a linear 0.5–4.5 V analogue signal proportional to the applied pressure (0–1.6 MPa). Using the DFRobot Gravity 3-pin interface, it co...

SKU: AF-165 | Brand: Adafruit

The TMP36 is a low-power analog temperature sensor that outputs a voltage proportional to ambient temperature. It operates on 2.7–5.5V and requires no external calibration — simply read the analog voltage and convert ...

SKU: LB-24-ATMOS | Brand: Little Bird

A compact barometric pressure and temperature sensor module that communicates over I2C. Ideal for weather stations, altitude estimation, and environmental monitoring projects with micro:bit, Arduino, or other microcon...

SKU: AF-4366 | Brand: Adafruit

The Adafruit TLV493D is a 3-axis magnetometer designed for detecting and tracking nearby magnets in three dimensions. Manufactured by Infineon, this sensor measures magnetic fields across the X, Y, and Z axes with 12-...

SKU: AF-4026 | Brand: Adafruit

The Adafruit STEMMA Soil Sensor uses capacitive measurement to detect soil moisture — a more durable approach than resistive sensors that corrode over time. With a single probe and no exposed metal, it avoids oxidatio...

SKU: EF-EF04097 | Brand: ElecFreaks

The Octopus Capacitive Soil Moisture Sensor uses capacitive sensing to detect soil moisture levels, avoiding the corrosion problems common with resistive sensors for a much longer service life. It outputs an analogue ...

SKU: AF-5463 | Brand: Adafruit

This rubber sheet is made of the same carbon-black impregnated rubber material that our conductive rubber cord uses. Traditionally it would be used for EMF shielding, or conductive gaskets - but it's very fun to play ...