Microcontrollers
Our Microcontrollers collection brings together a wide range of development boards and platforms for makers, students, and engineers across Australia. From ESP32 and STM32 to RP2040, Feather, and PIC, there's a board here for every skill level and project type.
Whether you're building IoT devices, learning embedded programming, or prototyping professional electronics, these boards support CircuitPython, MicroPython, C/C++, and more. Fast Australian shipping gets your next project started sooner.
Arduino Due
SKU: PI-A000062 | Brand: Pimoroni
The Arduino Due is Arduino's first ARM-based development board, powered by the Atmel SAM3X8E — a 32-bit Cortex-M3 processor running at 84MHz. With 54 digital I/O pins, 12 analogue inputs, 2 DAC outputs, and USB-OTG, i...
Out of stock
16 MHz Crystal Oscillator
SKU: PI-COM-OSC-16MHZ | Brand: Pimoroni
A 16 MHz quartz crystal oscillator in the HC49/4H through-hole package. Provides an accurate timing signal for microcontrollers and digital circuits, and is ideal for ATmega328P-based projects where you want to take a...
Out of stock
CircuitPython Starter Kit with Adafruit Itsy Bitsy M4
SKU: AF-4028 | Brand: Adafruit
Get started with CircuitPython using this all-in-one starter kit built around the Adafruit ItsyBitsy M4 Express. The ItsyBitsy M4 packs a 120 MHz ATSAMD51 Cortex M4 processor with floating point support, 512 KB flash,...
Out of stock
Electro-Fashion: Igloo, PICAXE wearable module
SKU: KI-2751 | Brand: Kitronik
This wearable module is ideal for all of your e-textiles project needs including adding the endless possibilities of programming to your wearable projects!Video:Please note: other Kitronik products are included in thi...
Out of stock
B4 Computer Processor Kit
SKU: DT-B4-BK-1-4 | Brand: Little Bird
The B4 is a modular computer processor made to help students explore the fundamental operation of computers. It has been designed from the ground up to support students who are studying the new Australian Curriculum: ...
Out of stock
Adafruit NeoTrellis M4 with Enclosure and Buttons Kit Pack
SKU: AF-4020 | Brand: Adafruit
Everything you need to get started with the NeoTrellis M4 in one kit. This pack bundles the NeoTrellis M4 Mainboard, an acrylic enclosure, silicone elastomer button pads, and rubber feet — ready to assemble into a com...
Out of stock
Blend Micro
SKU: RB-BLENDMICRO | Brand: Little Bird
Blend Micro is our first integrated developement board, we have "blend"ed Arduino with Bluetooth 4.0 Low Energy (aka BLE or Bluetooth Smart) into a single board. It is targeted for makers to develop low power Internet...
Out of stock
BLE Nano Kit
SKU: RB-BLENANOKIT | Brand: Little Bird
The BLE Nano is one of the smallest Bluetooth Low Energy development boards available, built around the Nordic nRF51822 System-on-Chip. Its compact form factor makes it ideal for wearable devices, IoT sensors, and spa...
Out of stock
nRF51822
SKU: RB-NRF51822 | Brand: Little Bird
RedBearLab nRF51822 Pinout Board Layout A. Nordic nRF51822 Module B. Freescale MK20DX128VFM5 C. System Reset Button D. Indicate LEDs E. SWD Interface For K20 F. SWD Interface For nRF51822 G. nRF51822 SPI Inter...
Out of stock
RB Link
SKU: RB-RBLINK | Brand: Little Bird
The RBLink is a development and debugging board for the RedBear Duo, designed for use with the Broadcom WICED SDK. It features an ST-LINK/V2 debugger, USB drag-and-drop programming, and eight Grove-compatible connecto...
Out of stock
BLE Nano
SKU: RB-BLENANO | Brand: Little Bird
The BLE Nano is the smallest Bluetooth 4.0 Low Energy development board available, measuring just 18.5 × 21.0 mm. Built around the Nordic nRF51822 SoC (ARM Cortex-M0 + BLE), it runs at 16 MHz with ultra-low power cons...
Out of stock
RedBear Duo
SKU: RB-REDBEARDUO | Brand: Little Bird
The RedBear Duo is a thumb-sized IoT development board with built-in Wi-Fi, Bluetooth 4.1 (dual mode), and Particle cloud connectivity. Everything you need to prototype connected devices is on board — just add your id...
Out of stock
Blend
SKU: RB-BLEND | Brand: Little Bird
Blend is an integrated developement board, we have "blend"ed Arduino with Bluetooth 4.0 Low Energy (aka BLE or Bluetooth Smart) into a single board. It is targeted for makers to develop low power Internet-Of-Things (I...
Out of stock
RedBear Beacon B1
SKU: RB-B1 | Brand: Little Bird
The RedBear Beacon B1 is an officially licensed Apple iBeacon transmitter with Bluetooth SIG qualification and CE, R&TTE, and FCC certifications. It broadcasts BLE (Bluetooth Low Energy) signals that can be detected b...
Out of stock
WiFi CC3200
SKU: RB-CC3200 | Brand: Little Bird
RedBearLab CC3200 WiFi series development boards, including RedBearLab CC3200 and WiFi Mini, are based on CC3200 module that is provided by Texas Instruments (TI). The target MCU is TI CC3200, the industry’s first sin...
Out of stock
Teensy 3.5
SKU: PJ-TEENSY35 | Brand: Little Bird
The Teensy 3.5 is a compact, powerful USB development board built around a 32-bit ARM Cortex-M4 processor running at 120 MHz with a hardware floating-point unit. With 512 KB of flash, 256 KB of RAM, and 64 digital I/O...
Out of stock
Breadboard Dock for Onion Omega2
SKU: ON-BBDOCK | Brand: Little Bird
Love working with breadboards? To make the Omega more breadboard friendly, we present the Breadboard Dock. It is our most no frills Dock to date! We strongly recommend getting a Dock for your Omega to get the best ...
Out of stock
PocketC.H.I.P.
SKU: NT-100225 | Brand: Little Bird
1000s of free games with built-in game making tools and it fits in Your Pocket. RUN FASTER, JUMP HIGHER, AND LIVE LONGER WITH BUILT-IN GAME CHANGING TOOLS
Out of stock
TinyG CNC Controller Board v8
SKU: AF-1749 | Brand: Adafruit
The TinyG project is a high performance, USB based CNC 6-axis controller that supports XYZ linear and ABC rotary axes with 4 motor outputs. It is designed for small CNC applications and other applications that require...
Out of stock
MicroPython pyboard [v1.1]
SKU: AF-2390 | Brand: Adafruit
The pyboard is a compact and powerful electronics development board that runs MicroPython. It connects to your PC over USB, giving you a USB flash drive to save your Python scripts, and a serial Python prompt (a REPL)...
Out of stock
