Microcontrollers
Our Microcontrollers collection brings together a wide range of development boards and platforms for makers, students, and engineers across Australia. From ESP32 and STM32 to RP2040, Feather, and PIC, there's a board here for every skill level and project type.
Whether you're building IoT devices, learning embedded programming, or prototyping professional electronics, these boards support CircuitPython, MicroPython, C/C++, and more. Fast Australian shipping gets your next project started sooner.
M-DUINO PLC Arduino Ethernet 19R I/Os (Relay Output)
SKU: DF-DFR0905 | Brand: DFRobot
This is the first PLC equipment based on the Arduino Technology designed for a professional use. Taking Arduino Mega2560 as its core control chip, the M-Duino PLC has 17 I/Os including 4 analog and digital inputs...
Delivered by Fri 19 Jun
Maix Bit AI Development Board RISC-V K210 IoT
SKU: DF-DFR0639 | Brand: DFRobot
The Maix Bit is a compact AI development board powered by the Kendryte K210 dual-core RISC-V processor. With 8MB of on-chip SRAM (6MB general purpose + 2MB AI dedicated), a built-in neural network processor delivering...
Delivered by Fri 19 Jun
M1 AI+lOT Module K210 Deep learning
SKU: DF-DFR0636 | Brand: DFRobot
AI chip normally refers to ASIC chip that aims at AI algorithms. Although the conventional CPU and GPU can be used to execute AI algorithms, they have been greatly limited in their speed, performance, and practicality...
Delivered by Fri 19 Jun
M-DUINO 21 I/Os PLUS (Optoisolated Output)
SKU: DF-DFR0904 | Brand: DFRobot
This is the first PLC equipment based on the Arduino Technology designed for a professional use. Taking Arduino Mega2560 as its core control chip, the M-Duino PLC has 21 I/Os including 6 analog and digital inputs...
Delivered by Fri 19 Jun
10 I/Os Relay Module - CPU ESP32 (Relay Output)
SKU: DF-DFR0901 | Brand: DFRobot
The 10 I/Os Relay Module with ESP32 is an industrial PLC that combines the connectivity of the ESP32 (Wi-Fi, Bluetooth LE, Ethernet, RS485) with relay outputs for switching higher-voltage loads. It provides a simple, ...
Delivered by Fri 19 Jun
10 I/Os Relay Module - CPU Arduino NANO (Relay Output)
SKU: DF-DFR0899 | Brand: DFRobot
The 10 I/Os Relay Module is an industrial PLC based on the Arduino Nano with relay outputs for switching higher-voltage loads. It provides a simple, cost-effective, and open-source approach to industrial monitoring an...
Delivered by Fri 19 Jun
10 I/Os PLC Module - CPU Arduino NANO (Optoisolated Output)
SKU: DF-DFR0898 | Brand: DFRobot
The 10 I/Os PLC Module is an industrial programmable logic controller based on the Arduino Nano. It provides a simple, cost-effective, and open-source approach to industrial monitoring and control, with standardised P...
Delivered by Fri 19 Jun
Maker Pi RP2040 - Motor and Robot Controller
SKU: AF-5129 | Brand: Adafruit
Cytron's Maker Pi RP2040 features the new Raspberry Pi RP2040 chip embedded on a robot controller board. The board comes with a dual-channel DC motor driver, 4 servo motor ports, and 7 Grove I/O connectors. Now you ca...
Delivered by Tue 30 Jun
SMT Socket Header Kit for FeatherWings
SKU: AF-4743 | Brand: Adafruit
These two SMT Socket Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! These headers are particularly cute and slim and are designed to matc...
Delivered by Tue 30 Jun
ESP32-S2-WROVER-I Module with uFL - 4 MB flash and 2 MB PSRAM
SKU: AF-4760 | Brand: Adafruit
The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Then the ESP32 came out with tons of pins, Bluetooth...
Delivered by Tue 30 Jun
Adafruit Slider Trinkey - USB NeoPixel Slide Potentiometer
SKU: AF-5021 | Brand: Adafruit
The Adafruit Slider Trinkey is a tiny USB A board built around the ATSAMD21 microcontroller with a pre-soldered 35 mm slide potentiometer and two NeoPixel LEDs. Plug it into any USB A port on your computer and program...
Delivered by Tue 30 Jun
Adafruit Rotary Trinkey - USB NeoPixel Rotary Encoder
SKU: AF-4964 | Brand: Adafruit
The Adafruit Rotary Trinkey is a tiny USB A board built around the ATSAMD21 microcontroller with a footprint for a standard rotary encoder and a built-in NeoPixel LED. Plug it into any USB A port on your computer and ...
Delivered by Tue 30 Jun
Adafruit LED Glasses Driver - nRF52840 Sensor Board
SKU: AF-5217 | Brand: Adafruit
The Adafruit LED Glasses Driver is a slim, Bluetooth-enabled controller board built around the Nordic nRF52840 chipset. Originally designed to drive the Adafruit LED Glasses RGB LED matrix, it also works brilliantly a...
Delivered by Tue 30 Jun
Circuit Playground Express Soil Sensor Mini Kit
SKU: AF-4060 | Brand: Adafruit
The thirst is real! Keep your flora (plants, not the board *wink*) happy and hydrated with the Circuit Playground Express Soil Sensor Mini Kit. This kit will teach you all about how to keep your plants in good co...
Delivered by Tue 30 Jun
Adafruit ESP32-S2 Feather - 2 MB PSRAM and STEMMA QT / Qwiic
SKU: AF-5000 | Brand: Adafruit
The Adafruit ESP32-S2 Feather brings Espressif's single-core ESP32-S2 to the Feather ecosystem with native USB, 2.4 GHz Wi-Fi, 4 MB flash, and 2 MB PSRAM. Native USB support means it can act as a keyboard, mouse, MIDI...
Delivered by Tue 30 Jun
Adafruit Feather nRF52 Pro with myNewt Bootloader
SKU: AF-3574 | Brand: Adafruit
The Feather nRF52 Pro is an advanced Bluetooth Low Energy development board built around the Nordic nRF52832, designed specifically for use with the Apache Mynewt RTOS. It features a fully open-source BLE 5.0 stack, a...
Delivered by Tue 30 Jun
Adafruit ESP32-S2 Feather with BME280 Sensor - STEMMA QT
SKU: AF-5303 | Brand: Adafruit
The Adafruit ESP32-S2 Feather with BME280 is identical to the standard ESP32-S2 Feather but with an on-board BME280 temperature, humidity, and barometric pressure sensor at I2C address 0x77. This makes it an instant I...
Delivered by Tue 30 Jun
SparkFun MicroMod Qwiic Carrier Board - Single
SKU: SF-DEV-17723 | Brand: SparkFun
The MicroMod Qwiic Carrier Board can be used to rapidly prototype with other Qwiic devices. The MicroMod M.2 socket provides users the freedom to experiment with any processor board in the MicroMod ecosystem. This boa...
Delivered by Fri 19 Jun
SparkFun MicroMod Qwiic Carrier Board - Double
SKU: SF-DEV-17724 | Brand: SparkFun
The MicroMod Qwiic Carrier Board can be used to rapidly prototype with other Qwiic devices. The MicroMod M.2 socket provides users the freedom to experiment with any processor board in the MicroMod ecosystem. This boa...
Delivered by Fri 19 Jun
SparkFun MicroMod Environmental Function Board
SKU: SF-SEN-18632 | Brand: SparkFun
The SparkFun MicroMod Environmental Function Board adds additional sensing options to the MicroMod Processor Boards. This Function Board includes three sensors to monitor air quality (SGP40), humidity & temperature (S...
Delivered by Fri 19 Jun
