LEDs

SKU: KI-35164 | Brand: Kitronik

The Kitronik TriColour LED board is a pre-built strip board designed for low-power lighting displays, such as edge-lit signs and illustrations. It has been designed such that its power requirement is within the sup...

SKU: LB-LS0107 | Brand: Little Bird

These prewired 5 mm warm white LEDs come ready to use with a 20 cm cable attached — no soldering required. With a built-in resistor for 3–12V DC operation, simply connect power and ground to add warm white lighting to...

SKU: AF-4203 | Brand: Adafruit

A pack of 25 diffused 5mm LEDs in five colours — white, blue, green, yellow, and red (5 of each). These classic through-hole LEDs are bright enough for daytime visibility and diffused for a wide viewing angle, making ...

SKU: LB-WHITE5MM | Brand: Little Bird

We all know that you can never get too many LEDs. Don’t worry, we’ve got you covered. This is a pack of 25 LEDs all conveniently packaged in a nice reusable bag. Make that next project shine!Features:25 bright white LEDs

SKU: SF-COM-14563 | Brand: SparkFun

A pack of 25 green 5mm LEDs with built-in resistors, eliminating the need for external current-limiting resistors. Operating from 3.0V to 5V, these LEDs are ready to connect directly to your power source — no calculat...

SKU: LB-RGBLED | Brand: Little Bird

This flashing RGB LED is designed for paper circuits, greeting cards, and craft projects. It automatically cycles through random colour patterns with no programming or microcontroller required — just connect it to a c...

SKU: AF-1451 | Brand: Adafruit

Diffused 5mm tri-colour LEDs with separate red, green, and blue chips inside a square "Piranha" (super-flux) package. With a 90° viewing angle and up to 3000mcd combined brightness, these LEDs are great for colour mix...

SKU: SF-COM-09264 | Brand: SparkFun

Ever hear of a thing called RGB? Red, Green, Blue? How about an RGB LED? These 5mm units have four pins - Cathode is the longest pin. One for each color and a common cathode. Use this one LED for three status indicato...

SKU: SF-COM-08546 | Brand: SparkFun

A single-digit 7-segment LED display in red with a common anode configuration. Features two decimal point positions, with the right-side decimal point wired and functional. Key Features Single Digit 7-Segment – Com...

SKU: SF-COM-00532 | Brand: SparkFun

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very standard, yellow LED. The lens is 3mm in diameter and it is diffused.

SKU: SF-COM-00530 | Brand: SparkFun

A super bright yellow 5 mm LED with a clear lens, delivering high-intensity output that's ideal for indicator lights, visual alerts, and hobby electronics projects. The clear lens provides a focused beam with excellen...

SKU: SF-COM-00105 | Brand: SparkFun

Ever hear of a thing called RGB? Red, Green, Blue? How about an RGB LED? These 5mm units have four pins - Cathode is the longest pin. One for each color and a common cathode. Use this one LED for three status indic...

SKU: DF-FIT0372 | Brand: DFRobot

Have you ever played with LEDs and got hurt in your eyes? This pack of diffused LEDs won't. !Diffused LEDs are really useful in indications, they look softer and more uniformed so that you can see them well from any ...

SKU: AF-297 | Brand: Adafruit

Need some really bright LEDs? We are big fans of these clear red LEDs, in fact we use them exclusively in our kits. They are very bright and have about 20degree LED beam. They go easily into a breadboard and will add ...

SKU: SF-COM-11120 | Brand: SparkFun

Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft, diffuse glow.Features: Forward Voltage (R/G/B): 2.0 / 3.2 / 3.1V Forward Current: 20mA Intensity (R/G/B): 550 / 25...

SKU: AF-754 | Brand: Adafruit

Need some really bright LEDs? We are big fans of these clear white LEDs, in fact we use them exclusively in our kits. They are very bright and have about 25 degree LED beam so they're good for illumination, head lamps...

SKU: SF-COM-09594 | Brand: SparkFun

A standard 5 mm yellow LED — the essential building block for power indicators, status lights, sensor circuits, and blinking displays. Specifications Colour – Yellow Size – 5 mm (T-1 3/4) Forward Voltage – 2.0V t...

SKU: SF-COM-09592 | Brand: SparkFun

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very basic 5mm LED with a green lens. It has a typical forward voltage of 2.0V and ...

SKU: LB-LS0014-BAG | Brand: Little Bird

A bulk pack of 250 through-hole RGB LEDs in a 10 mm clear epoxy package. Common cathode configuration with individually addressable red, green, and blue elements for full-colour mixing. Specifications LED Size – 10...

SKU: SF-COM-23649 | Brand: SparkFun

This is a right angle 5mm addressable LED. It sounds boring, but at the time of writing, this is the first one in the world. If you've ever tried to get a project into an enclosure, you know what a challenge it can be...