LEDs

SKU: LB-00211 | Brand: Little Bird

The E-Textiles Rainbow LED strip contains seven LilyPad-style sewable LEDs in six colours, connected in a snap-apart strip. Break off individual LEDs as needed and sew them into clothing, accessories, or craft project...

SKU: LB-EAGLED-LED-R | Brand: Little Bird

Made here in Sydney these are our very own EagLED LED - Red in a pack of 10 These are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or use in Paper Circuits. T...

SKU: LB-ETEXTILELED-R | Brand: Little Bird

This is a simple single unit RED E-Textile LEDEach unit can be sewn into fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)!These are a thicker PCB tha...

SKU: LB-LS0538 | Brand: Little Bird

A cute little module that allows you to turn on and off the Red, Yellow and Green lights and 'control traffic'

SKU: AF-1439 | Brand: Adafruit

A 16mm illuminated pushbutton with a built-in red LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger in...

SKU: AF-4165 | Brand: Adafruit

This is a pretty neat way to glow up. Light in the fiber optic cable zooms through the core by constantly bouncing off of the edge of the molded plastic, a principle called "total internal reflection" (which also k...

SKU: AF-1190 | Brand: Adafruit

BAM! This 60mm diameter arcade button is large and inviting and ready for all sorts of pressing and pushing. We've seen these on some games of skill in arcades, they're easy to mount on nearly any kind of enclosure. T...

SKU: SF-DEV-13903 | Brand: SparkFun

This is the LilyPad Rainbow LED strip, with seven LilyPad LEDs that are still attached to one another, letting you snap LEDs apart at your leisure to sew into clothing or whatever else you can dream up.The LilyPad Rai...

SKU: LB-24-2-LED | Brand: Little Bird

Check out our tutorial here There are three pins:Signal: This pin is a signal pin, and can be used to emit a green lightMiddle Pin : This pin is another signal pin, and can be used to emit a red lightGND: Though it ...

SKU: SF-DEV-14013 | Brand: SparkFun

A pack of five red LilyPad LEDs on a snap-apart strip. Each LED has large sew tabs for stitching into fabric with conductive thread, making them ideal for wearable electronics and e-textile projects. The ultra-thin 0....

SKU: LB-LS5772-R | Brand: Little Bird

A harmonious blend of traditional charm and modern technology designed to illuminate your spaces with a warm, flickering glow reminiscent of real candlelight. Meticulously crafted to capture the essence of classic Edi...

SKU: SF-COM-09483 | Brand: SparkFun

A basic 4-digit 7-segment display in red. This common anode display features one decimal point per digit, plus individually controllable apostrophe and colon points — perfect for clocks, counters, and numeric readouts...

SKU: KI-35164 | Brand: Kitronik

The Kitronik TriColour LED board is a pre-built strip board designed for low-power lighting displays, such as edge-lit signs and illustrations. It has been designed such that its power requirement is within the sup...

SKU: AF-1721 | Brand: Adafruit

A 24-bar bi-colour (red/green) LED bargraph kit with an I²C backpack controller. The backpack handles all LED multiplexing and drive, letting you control 48 LEDs (24 bars × 2 colours) from just two I²C pins. Constant-...

SKU: AF-865 | Brand: Adafruit

A red 4-digit 7-segment clock display with 0.56″ (14.2 mm) digit height. Each digit includes a decimal point, plus a centre colon for time-based displays. Bright at 18 mcd, these displays are easy to read and can be d...

SKU: SB-PICUBE-RED | Brand: Little Bird

PiCube is a 4x4x4 LED cube HAT for Raspberry Pi with 5V DC operating voltage. PiCube, a monochromatic( Red, Blue, Green) LED with 64, is the latest product in the range of technologically advanced devices of SB Compo...

SKU: DF-DFR0789 | Brand: DFRobot

This is a simple LED-illuminated self-lock switch button. It’s just like a basic switch button, but it lights up color(red/yellow/green/blue/white) when pressed down, which gives you visual feedback. These little butt...

SKU: PR-PIM331 | Brand: Little Bird

A whole heap of LED pixels with individual brightness control, for scrolling messages, animations, and more - Scroll pHAT HD!Scroll pHAT HD packs 17x7 pixels (119 total) onto a single pHAT, and gives you full PWM...

SKU: SF-COM-00682 | Brand: SparkFun

LED Matrix with Bright-Red and Bright-Green LEDs. This medium matrix has 64 Red/Green LEDs built into one common cathode housing. Unit comes with a black finish and a opaque LED lenses. Features: 0.33 x 2 x 2" ...

SKU: DF-DFR0021-R | Brand: DFRobot

A simple red LED module with a Gravity 3-pin digital interface for plug-and-play connection to Arduino and other microcontrollers via a Gravity IO Expansion Shield. Ideal for beginners learning digital output control....