LEDs

SKU: AF-559 | Brand: Adafruit

A chrome-plated metal pushbutton with an illuminated red LED ring, designed for panel mounting in a 16 mm hole. The weatherproof design includes a rubber gasket to seal the enclosure against water ingress, making it s...

SKU: SF-COM-00682 | Brand: SparkFun

LED Matrix with Bright-Red and Bright-Green LEDs. This medium matrix has 64 Red/Green LEDs built into one common cathode housing. Unit comes with a black finish and a opaque LED lenses. Features: 0.33 x 2 x 2" ...

SKU: AF-2037 | Brand: Adafruit

A 16×8 LED matrix backpack kit featuring two ultra-bright 1.2" red 8×8 round LED matrices on a single I2C-controlled driver board. The HT16K33 chip handles all the multiplexing, so you only need two I2C pins (SDA and ...

SKU: DF-DFR0090 | Brand: DFRobot

An 8-digit serial LED display module that uses an SPI (3-wire) interface, requiring only three I/O pins from your Arduino or microcontroller. Multiple modules can be daisy-chained together for longer displays. The fli...

SKU: DF-DFR0021-R | Brand: DFRobot

A simple red LED module with a Gravity 3-pin digital interface for plug-and-play connection to Arduino and other microcontrollers via a Gravity IO Expansion Shield. Ideal for beginners learning digital output control....

SKU: DF-DFR0199-R | Brand: DFRobot

This LilyPad LED Micro is Discontinued Now, We recommend other LilyPad as a suitable replacement. Here is a simple 5 pack of red LED micro for LilyPad. Need a smaller way to add some 'twinkle' to your Li...

SKU: SF-COM-08530 | Brand: SparkFun

A jumbo 6.5-inch (153mm tall) single-digit 7-segment display in red. This oversized display is visible from over 30 metres away, making it ideal for large-scale scoreboards, countdown timers, and public-facing numeric...

SKU: SF-COM-11966 | Brand: SparkFun

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount momentary switch with an illuminated red LED ring. It is a SPDT with 16mm threadin...

SKU: DF-DFR0286 | Brand: DFRobot

The Shake 8×8 LED Matrix is a compact, portable display module with 64 red LEDs, a built-in ATmega32U4 microcontroller, and a rechargeable 140 mAh LiPo battery lasting up to 4 hours. A built-in vibration sensor lets y...

SKU: AF-454 | Brand: Adafruit

You will squeak with delight when you hold this adorable miniature LED 8x8 matrix. 0.8" square, it's got everything a big LED matrix has, but bite-sized! There are 16 pins on the side, 8 on each, with 0.1" spacing ...

SKU: AF-455 | Brand: Adafruit

A compact 8×8 red LED matrix (KWM-30881CVB) measuring 30.5 mm (1.2") per side. The ultra-bright red LEDs are arranged in a grid with 16 pins (8 per side) on standard 2.54 mm (0.1") pitch, allowing the display to plug ...

SKU: AF-458 | Brand: Adafruit

Make a scrolling sign, or a small video display with this 8x8 gridded bi-color LED matrix. Only 1.2" on a side, it is quite visible but not so large it wont plug into a breadboard! Every grid has two LEDs inside so...

SKU: AF-1907 | Brand: Adafruit

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is a nice, bright 14-segment alphanumeric display that can show letters and n...

SKU: AF-1911 | Brand: Adafruit

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is a nice, bright alphanumeric display that shows letters and numbers in a be...

SKU: DF-DFR0488 | Brand: DFRobot

DFRobot FireBeetle is a low-power consumption micro-controller intentionally designed for Internet of Things (IoT). This series micro-controllers aims at IoT node of low-power consumption, attending to build the...

SKU: LB-ELM-2002SRWA | Brand: Little Bird

A 5×7 LED dot matrix display module (ELM-2002 series) with large 5.0mm diameter emitting dots in super red. Suitable for building large numerical and alphanumerical readout displays. The white dots on a grey surface p...

SKU: DF-DFR0167-R | Brand: DFRobot

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn ...

SKU: SF-KIT-10723 | Brand: SparkFun

Have you ever seen a Weevil? It’s a pretty under-appreciated beetle, so we thought it deserved a kit. Okay, so we just kind of like the name and think it makes a cute board. The WeevilEye is a through-hole soldering k...

SKU: AF-5166 | Brand: Adafruit

A bite-sized, satisfying clicky key switch keychain with a built-in red LED. Press the button to light it up — perfect for showing off etched glow-through keycaps or just keeping your fidgety hands busy. Powered by a...

SKU: PI-COM-B010 | Brand: Pimoroni

These tower lights are designed for industrial use, as status lights on factory machinery, but they're just plain FUN to set up at your desk to notify you of impending meltdowns, toilet occupation status, or that y...