LEDs

SKU: DF-FIT0929 | Brand: DFRobot

##Introduction Measuring 1200mm in length with a 2mm diameter, this flexible filament has 640 LEDs that can be used for DIY lighting decoration and 360° all-angle lighting fixtures. It comes with adjustable brightness...

SKU: AF-5867 | Brand: Adafruit

nOOds are flexible LED filaments made with ultra-flexible metal backing and coated in coloured silicone. Dozens of micro LED diodes are bonded together along the strip, producing a warm, even glow. The flexible design...

SKU: AF-5572 | Brand: Adafruit

Adding LEDs to anything makes it 5x better -- it's a scientific fact! But when you have LEDs, you've got wires and power supplies and all that stuff is kinda annoying. What if you could have LEDs that light up without...

SKU: SB-PICUBE-RED | Brand: Little Bird

PiCube is a 4x4x4 LED cube HAT for Raspberry Pi with 5V DC operating voltage. PiCube, a monochromatic( Red, Blue, Green) LED with 64, is the latest product in the range of technologically advanced devices of SB Compo...

SKU: AF-5456 | Brand: Adafruit

Sure, we've got all sorts of diffused bare LEDs in all sorts of colors and sizes. But have you ever laid your peepers on this set of punk spike LEDs? These look too cute and/or threatening and will look...

SKU: DF-DFR0789 | Brand: DFRobot

This is a simple LED-illuminated self-lock switch button. It’s just like a basic switch button, but it lights up color(red/yellow/green/blue/white) when pressed down, which gives you visual feedback. These little butt...

SKU: SF-BOB-15932 | Brand: SparkFun

The SparkFun Qwiic Button simplifies adding a tactile button to your I2C project. It handles debouncing, pull-up resistors, and polling internally, so you can focus on your application. A built-in red LED provides vis...

SKU: EF-EF04063 | Brand: ElecFreaks

Octopus Electronic Bricks, you can use them build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digi...

SKU: AF-3860 | Brand: Adafruit

Here at Adafruit we love discovering new and exotic glowing things. Like moths to the flame, we were intrigued by these fresh Flexible Silicone Neon-Like LED Strips! They look a lot like neon, but without the ...

SKU: SF-COM-14560 | Brand: SparkFun

You don’t have to worry about adding a resistor to an LED if you get an LED with a built in resistor! This pack of 25 red 5mm LEDs will help alleviate any frustrations you’ve had with accidentally burning them out by ...

SKU: SF-COM-00682 | Brand: SparkFun

LED Matrix with Bright-Red and Bright-Green LEDs. This medium matrix has 64 Red/Green LEDs built into one common cathode housing. Unit comes with a black finish and a opaque LED lenses. Features: 0.33 x 2 x 2" ...

SKU: AF-2037 | Brand: Adafruit

A 16×8 LED matrix backpack kit featuring two ultra-bright 1.2" red 8×8 round LED matrices on a single I2C-controlled driver board. The HT16K33 chip handles all the multiplexing, so you only need two I2C pins (SDA and ...

SKU: DF-DFR0090 | Brand: DFRobot

An 8-digit serial LED display module that uses an SPI (3-wire) interface, requiring only three I/O pins from your Arduino or microcontroller. Multiple modules can be daisy-chained together for longer displays. The fli...

SKU: DF-DFR0199-R | Brand: DFRobot

This LilyPad LED Micro is Discontinued Now, We recommend other LilyPad as a suitable replacement. Here is a simple 5 pack of red LED micro for LilyPad. Need a smaller way to add some 'twinkle' to your Li...

SKU: SF-COM-08530 | Brand: SparkFun

A jumbo 6.5-inch (153mm tall) single-digit 7-segment display in red. This oversized display is visible from over 30 metres away, making it ideal for large-scale scoreboards, countdown timers, and public-facing numeric...

SKU: AF-299 | Brand: Adafruit

A pack of 25 diffused red 5 mm LEDs, bright enough to be visible in daylight and viewable from any angle thanks to the diffused lens. These are great all-purpose indicator LEDs that fit easily into a breadboard. Spec...

SKU: PL-1070 | Brand: Pololu

This is a basic, general-purpose red LED in a standard T1 (3mm) package with 0.1" lead spacing.

SKU: AF-454 | Brand: Adafruit

You will squeak with delight when you hold this adorable miniature LED 8x8 matrix. 0.8" square, it's got everything a big LED matrix has, but bite-sized! There are 16 pins on the side, 8 on each, with 0.1" spacing ...

SKU: AF-458 | Brand: Adafruit

Make a scrolling sign, or a small video display with this 8x8 gridded bi-color LED matrix. Only 1.2" on a side, it is quite visible but not so large it wont plug into a breadboard! Every grid has two LEDs inside so...

SKU: AF-1911 | Brand: Adafruit

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is a nice, bright alphanumeric display that shows letters and numbers in a be...