LEDs

SKU: LB-00211 | Brand: Little Bird

The E-Textiles Rainbow LED strip contains seven LilyPad-style sewable LEDs in six colours, connected in a snap-apart strip. Break off individual LEDs as needed and sew them into clothing, accessories, or craft project...

SKU: LB-EAGLED-LED-G | Brand: Little Bird

EagLED LEDs were made for e-textiles! This is a simple pack of green wearable leds that are still attached to one another. Simply snap the LEDs apart at your leisure to sew into clothing or whatever else you can...

SKU: LB-LS0538 | Brand: Little Bird

A cute little module that allows you to turn on and off the Red, Yellow and Green lights and 'control traffic'

SKU: CB-11945692935 | Brand: Chibitronics

Color your world with Chibitronics MegaPack of 30 tropical LED circuit stickers.  This pack includes 10 pink, 10 orange, and 10 green LED circuit stickers.  Limited Edition, quantities limited.  

SKU: LB-ETEXTILELED-YG | Brand: Little Bird

A single yellow-green LED module designed for e-textiles projects. Each unit features sewable tabs so it can be stitched directly into fabric using conductive thread. The thicker PCB design makes it more durable than ...

SKU: AF-3487 | Brand: Adafruit

This 30mm translucent green arcade button has built-in LEDs for a beautiful illuminated look. Two surface-mount LEDs with resistors are embedded in the button body, ready to light up from a microcontroller pin or dire...

SKU: AF-1756 | Brand: Adafruit

Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making t...

SKU: SF-DEV-13903 | Brand: SparkFun

This is the LilyPad Rainbow LED strip, with seven LilyPad LEDs that are still attached to one another, letting you snap LEDs apart at your leisure to sew into clothing or whatever else you can dream up.The LilyPad Rai...

SKU: LB-24-2-LED | Brand: Little Bird

Check out our tutorial here There are three pins:Signal: This pin is a signal pin, and can be used to emit a green lightMiddle Pin : This pin is another signal pin, and can be used to emit a red lightGND: Though it ...

SKU: DF-DFR0785 | Brand: DFRobot

A pack of five LED-illuminated push buttons in the DFRobot Gravity format. Each button lights up a different colour (red, yellow, green, blue, and white) when pressed, providing clear visual feedback. The digital outp...

SKU: KI-35164 | Brand: Kitronik

The Kitronik TriColour LED board is a pre-built strip board designed for low-power lighting displays, such as edge-lit signs and illustrations. It has been designed such that its power requirement is within the sup...

SKU: AF-3433 | Brand: Adafruit

A button is a button, and a switch is a switch, but these translucent arcade buttons are in a class of their own. Particularly because they have LEDs built right in! That's right, you'll be button-mashing amidst a ...

SKU: SF-BOB-16842 | Brand: SparkFun

Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wiring up pull-up resistors? The Qwiic Button with built-in green LED simplifies all of ...

SKU: SF-COM-11968 | Brand: SparkFun

A heavy-duty, panel-mount momentary pushbutton with an illuminated green LED ring. Built from stainless steel with IP65 weatherproofing, this 16 mm threaded switch is tamper-resistant and designed for demanding enviro...

SKU: EF-EF05010 | Brand: ElecFreaks

A green LED module from the ELECFREAKS PlanetX sensor range, designed for use with micro:bit and the Nezha expansion board. The RJ11 connector makes it simple to plug in — no soldering or breadboard required. Control...

SKU: AF-5920 | Brand: Adafruit

A 1-metre flexible LED strip with 480 green SMT LEDs per metre, soldered side-by-side in a "chip on board" configuration. Topped with a translucent silicone diffuser and encased in a sealed silicone tube, the result i...

SKU: DF-DFR0789 | Brand: DFRobot

This is a simple LED-illuminated self-lock switch button. It’s just like a basic switch button, but it lights up color(red/yellow/green/blue/white) when pressed down, which gives you visual feedback. These little butt...

SKU: EF-EF04064 | Brand: ElecFreaks

Octopus Electronic Bricks, you can use them build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digi...

SKU: EF-EF04062 | Brand: ElecFreaks

A green 5 mm LED module from the Octopus Electronic Bricks range. It connects to Arduino or micro:bit via a 3-pin sensor cable for breadboard-free, plug-and-play wiring. Control it with a digital pin (LOW = on, HIGH =...

SKU: AF-3868 | Brand: Adafruit

Here at Adafruit we love discovering new and exotic glowing things. Like moths to the flame, we were intrigued by these fresh Flexible Silicone Neon-Like LED Strips! They look a lot like neon, but without the ...