LEDs & NeoPixels

SKU: AF-6314 | Brand: Adafruit

The Adafruit Sparkle Motion Mini is part of our series of "Sparkle Motion" boards, which are our attempt to make the best small WLED-friendly smart LED driving board in the whole world. Our resident mermaid, firepixie...

SKU: AF-5942 | Brand: Adafruit

The Pixelblaze V3 Standard XL is a Wi-Fi addressable LED controller powered by an ESP32 dual-core processor at 240 MHz. It includes a web-based live pattern editor that lets you write, preview, and store LED patterns ...

SKU: AF-5575 | Brand: Adafruit

Adding LEDs to anything makes it 5x better -- it's a scientific fact! But when you have LEDs, you've got wires and power supplies and all that stuff is kinda annoying. What if you could have LEDs that light up without...

SKU: AF-4980 | Brand: Adafruit

The only thing better than a nice mechanical key is, perhaps, FOUR mechanical keys that also can glow any color of the rainbow - and that's what the Adafruit NeoKey 1x4 QT I2C Breakout will let you do! ...

SKU: PI-TEK004 | Brand: Pimoroni

A four pack of sewable, heart-shaped bright pink LEDs. The voltage (and hence current) supplied from LIR2032 rechargeable coin cell batteries may damage the Teknikio LED boards, so please ONLY USE CR...

SKU: AF-3106 | Brand: Adafruit

Add a bright, easy-to-read numeric display to your Feather project with the Adafruit 4-Digit 7-Segment FeatherWing in blue. This combo pack includes the HT16K33-based FeatherWing backpack and a matching 0.56" tall blu...

SKU: AF-2853 | Brand: Adafruit

What is better than smart RGB LEDs? Smart RGB+White LEDs! These NeoPixel rings now have 4 LEDs in them (red, green, blue and white) for excellent lighting effects. Round and round and round they go!   This is...

SKU: AF-1046 | Brand: Adafruit

Make a scrolling sign, or a small video display with this 8x8 gridded yellow-orange LED matrix. Only 1.2" on a side, it is quite visible but not so large it won't plug into a breadboard! There are 16 pins on the si...

SKU: AF-1051 | Brand: Adafruit

The Adafruit Small 1.2" 8×8 LED Matrix w/I2C Backpack in green combines a bright 8×8 LED matrix with a dedicated HT16K33 driver backpack, letting you add a compact display to any microcontroller project with just two ...

SKU: PR-PIM244 | Brand: Little Bird

A starter pack of over 50 LEDs in three sizes and five colours, bundled with a selection of through-hole resistors. The current-limiting resistors protect the LEDs and let you control brightness — everything you need ...

SKU: AF-3954 | Brand: Adafruit

Upgrade your button-pad projects with full-colour NeoPixel backlighting. The NeoTrellis RGB Driver PCB is a 4×4 keypad controller with 16 NeoPixels and an onboard seesaw I2C chip that handles both button scanning and ...

SKU: AF-560 | Brand: Adafruit

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep&nbs...

SKU: AF-3635 | Brand: Adafruit

A mid-density side-emitting NeoPixel strip with 90 individually addressable RGB LEDs per metre on a flexible black PCB. Unlike standard NeoPixel strips that emit light upward, these side-light LEDs emit at 90 degrees ...

SKU: AF-2242 | Brand: Adafruit

The Adafruit DotStar Digital LED Strip (144 LED/m, white flex PCB) delivers superior performance over traditional NeoPixels with its 2-wire SPI interface. Push data at up to 32 MHz clock speed with no critical timing ...

SKU: PL-2527 | Brand: Pololu

Add individually addressable RGB lighting to your project with this 2-metre SK6812 LED strip. Featuring 60 LEDs controlled via a one-wire interface, each pixel can display any colour independently. The flexible, water...

SKU: AF-2530 | Brand: Adafruit

This 3W RGB LED from Adafruit delivers bright, full-colour illumination from a compact high-power package. Each red, green, and blue die handles up to 350mA continuous current (1A peak), producing a combined output of...

SKU: DF-DFR0167-R | Brand: DFRobot

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn ...

SKU: DF-DFR0167-G | Brand: DFRobot

A pack of five green LEDs designed for the LilyPad wearable electronics platform. Each LED is mounted on a thin, sewable PCB with large connecting pads, making it easy to stitch into clothing and e-textile projects wi...

SKU: AF-2959 | Brand: Adafruit

The Mini Skinny NeoPixel strip features 60 individually addressable RGB LEDs per metre on an ultra-narrow 7.5 mm wide flexible PCB (5 mm without casing). This is the white PCB version — identical specs to the black PC...

SKU: AF-2973 | Brand: Adafruit

This 9×16 Charlieplexed LED matrix features blue LEDs arranged in a grid designed to pair with the Adafruit IS31FL3731 16×9 Charlieplexed PWM LED Matrix Driver. With 144 individual LEDs in a compact package, it's idea...