LattePanda Expansion & I/O
Expand your LattePanda single board computer with PCIe, SATA, RS232, RS485, and Thunderbolt expansion boards, I/O shields, and adapter cables. Connect graphics cards, storage drives, sensors, and serial devices to unlock the full potential of your LattePanda project.
Ideal for makers, engineers, and professionals building compact PCs, industrial controllers, or embedded systems. Available for delivery across Australia from Little Bird Electronics.
Aluminum M.2 2280 Solid-state Drive Heat Sink (Compatible with LattePanda Sigma)
SKU: DF-FIT0969 | Brand: DFRobot
An aluminium M.2 2280 SSD heatsink with a heat pipe and passive fin design for high-performance thermal management. The 32 aluminium fins provide a total heat dissipation area of 4,500mm², delivering 10–30°C of coolin...
Delivered by Fri 19 Jun
PCIex1 to PCIex16 Graphics Card Extension Board (Compatible with LattePanda Sigma)
SKU: DF-FIT0972 | Brand: DFRobot
##Introduction This is a PCIex1 to PCIex16 adapter board specially prepared for LattePanda Sigma users. It has a PCIex16 card slot. No driver installation is required, just plug and play. It can be used with the M.2 M...
Delivered by Fri 19 Jun
M.2 M Key to SATA3.0 Expansion Board (Compatible with LattePanda Sigma)
SKU: DF-FIT0970 | Brand: DFRobot
##Introduction This is an M.2 M Key to SATA3.0 expansion board specially prepared for LattePanda Sigma users. it requires no driver installation and is plug and play. It has high-speed transmission and stable performa...
Delivered by Fri 19 Jun
RS485 Connector Expansion Shield for LattePanda Alpha&Delta
SKU: DF-DFR0779 | Brand: DFRobot
This industrial-grade RS485 shield from DFRobot is specially designed to expand two parallel RS485 ports (terminal) with high reliability for LattePanda Alpha and LattePanda Delta. Employing FTDI USB to serial port ch...
Delivered by Fri 19 Jun
RS232 Connector Expansion Shield for LattePanda Alpha&Delta
SKU: DF-DFR0778 | Brand: DFRobot
An industrial-grade RS232 expansion shield designed for the LattePanda Alpha and LattePanda Delta. Adds a 9-pin D-Sub (DB9) male RS232 port using an FTDI USB-to-serial chip with an isolated transceiver module for reli...
Delivered by Fri 19 Jun
R42SR M.2 Key-M PCI-E x4 Extension Cord for LattePanda Alpha & Delta
SKU: DF-FIT0782 | Brand: DFRobot
An M.2 Key-M to PCIe x4 extension cable designed for LattePanda Alpha and Delta single-board computers. This short 100 mm riser cable provides PCIe 3.0 x4 full-speed signal transmission (up to 32 Gbps), allowing you t...
Delivered by Fri 19 Jun
RS485 Connector Expansion Shield for LattePanda V1
SKU: DF-DFR0684 | Brand: DFRobot
An industrial-grade RS485 expansion shield designed specifically for the LattePanda V1. This shield adds a reliable, isolated RS485 interface (via OPEN4) with comprehensive protection including signal isolation, power...
Delivered by Fri 19 Jun
RS232 Connector Expansion Shield for LattePanda V1
SKU: DF-DFR0734 | Brand: DFRobot
An industrial-grade RS232 expansion shield designed specifically for the LattePanda V1. Adds one RS232 port (D-Sub 9-pin male) with signal isolation, power isolation, and surge protection for reliable serial communica...
Delivered by Fri 19 Jun
Streaming cable for LattePanda Single Board Computer
SKU: DF-FIT0552 | Brand: DFRobot
Run your LattePanda on a PC in pip(Picture in Picture) mode at the speed of light. Appreciating that we need a better way to interact between different platforms, the Streaming Cable enables your LattePanda to act lik...
Delivered by Fri 19 Jun
LattePanda IOTA M.2 4G LTE Expansion Board
SKU: DF-DFR1249 | Brand: DFRobot
Add mobile network connectivity to a LattePanda IOTA with this dedicated M.2 4G LTE expansion board. It provides a standard M.2 B-Key slot for installing a compatible cellular module, making it useful where Wi-Fi is u...
Delivered by Fri 19 Jun
LattePanda IOTA 18650 Smart UPS Expansion Board
SKU: DF-DFR1247 | Brand: DFRobot
This smart UPS expansion board adds battery-backed power management to the LattePanda IOTA, giving portable and embedded builds a laptop-like uninterruptible power supply. It uses the standard HID-UPS protocol, so Win...
Delivered by Fri 19 Jun
LattePanda IOTA Fanless Aluminium Heatsink
SKU: DF-FIT1028 | Brand: DFRobot
This passive heatsink is made for the LattePanda IOTA, giving the board a quiet, fanless way to shed heat during sustained high-load operation.The thickened aluminium alloy body uses expanded volume and precision-mach...
Delivered by Fri 19 Jun
