Jumpers & Wires

SKU: PL-1798 | Brand: Pololu

A 30 cm (12-inch) adapter cable with a 3-pin female JST PH-style connector on one end and individual female pins for 0.1" housings on the other. Designed to connect Sharp analog distance sensors to breadboards, microc...

SKU: AF-6405 | Brand: Adafruit

This JST SH compatible cable features 1 mm pitch 3-pin connectors on both ends, making it ideal for chaining boards together or connecting to debug ports. It's perfect for use with NeoPixel JST breakout boards, UPDI p...

SKU: AF-6404 | Brand: Adafruit

If you fancy connecting to anything else with a JST SH compatible 3-pin connector, this cable will do the trick. For example, our NeoPixel JST Breakout boards, or UPDI Friend, or Sparkle Motion, or other boards we hav...

SKU: AF-6406 | Brand: Adafruit

If you fancy connecting to anything else with a JST SH compatible 3-pin connector, this cable will do the trick. For example, our NeoPixel JST Breakout boards, or UPDI Friend, or Sparkle Motion, or other boards we hav...

SKU: TB-WB1591 | Brand: Little Bird

A flexible 4-core alarm cable with stranded conductors in a tough white outer sheath, supplied on a 30-metre roll. Each core consists of 7 × 0.16mm strands, providing good flexibility for installation in security syst...

SKU: SF-CAB-22035 | Brand: SparkFun

This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 1M (39.3in.) long with RG174 housing. The SMA connectors at each end are small enough for most consumer GPS, cellular, and other RF a...

SKU: SF-CAB-21281 | Brand: SparkFun

When experimenting with GPS or RF it can be very handy to have the antenna on the top of your house or outside with a clear view of the sky while you stay in doors and warm at your keyboard. This 10m (33') SMA extensi...

SKU: AF-5037 | Brand: Adafruit

This cable will make it super easy to use our plug-and-play STEMMA QT boards and controllers with chips, breakouts, and other devices that are I2C compatible but don't come with a STEMMA QT socket already on 'em.On on...

SKU: AF-4940 | Brand: Adafruit

A 9-pin ribbon-style jumper cable with 2.54mm (0.1") pitch connectors on both ends. A neat, reliable way to connect standard 0.1" header devices — perfboard, breadboards, breakout boards, and more — without taping ind...

SKU: AF-4483 | Brand: Adafruit

This 100mm adapter cable connects STEMMA QT / Qwiic sensors to Arduino MKR boards. It features a 4-pin JST SH (STEMMA QT / Qwiic) connector on one end and a 5-pin JST SH (Arduino MKR I2C) connector on the other, with ...

SKU: YH-6000300204 | Brand: Little Bird

A set of 10 alligator clip cables designed for the BBC micro:bit's edge connector pins. Each 35cm cable has clips sized to grip the micro:bit's 0, 1, 2, 3V, and GND pads, making it easy to connect external components ...

SKU: PL-4763 | Brand: Pololu

A 300mm (12″) cable with a female JST SH-style connector on one end and six unterminated colour-coded 28 AWG wires on the other. Designed for use with Pololu Micro Metal Gearmotor Encoders (both top-entry and side-ent...

SKU: M5-A034-D | Brand: Little Bird

Description GROVE Cable would be a necessary tool used on M5Stack development, since all PORTs on M5Core are GROVE stadard. This Grove cable, compatible with the GROVE port on M5Core,simply have 4 lines, two f...

SKU: M5-A030-B | Brand: Little Bird

Description LEGO Cable is used for LEGO motor which is compatible with BALA and M5Module LEGO+. We have prepared different length to fit your needs on different appliactions. Product Features 3 specifications...

SKU: M5-A030-C | Brand: Little Bird

Description LEGO Cable is used for LEGO motor which is compatible with BALA and M5Module LEGO+. We have prepared different length to fit your needs on different appliactions. Product Features 3 specifications...

SKU: AF-2513 | Brand: Adafruit

A 7.6 m (25 ft) spool of red 26 AWG stranded-core wire with a silicone rubber sheath. Silicone insulation stays soft and flexible across a wide temperature range (up to 200 °C) and is rated for up to 600 V — far more ...

SKU: AF-3165 | Brand: Adafruit

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible...

SKU: TB-WB1590 | Brand: Little Bird

A flexible 4-core alarm cable with stranded tin-plated copper conductors in a tough white outer sheath. Each core consists of 7 × 0.16mm strands (25 AWG), providing good flexibility for installation in security system...

SKU: PR-PIM109 | Brand: Little Bird

Originally designed to connect the Picade controller board to the joystick and arcade buttons, the Picade wiring loom is now available for all of your prototyping needs. Featuring 32 crimped 2.8mm / 0.11 in...

SKU: PI-CAB0803 | Brand: Pimoroni

Custom-designed cables for connecting your Mote modules to the Mote host. Available in a range of lengths these cables will be ideal whatever your installation! Features Matte black finish TPE cable shroud 22 AWG pow...