Individual LEDs

SKU: AF-679 | Brand: Adafruit

These are very interesting 5mm diffused RGB LEDs - instead of having 4 pins to control 3 LEDs, they have only two leads - power and ground. When powered, the LEDs perform a slow fade through the rainbow, from re...

SKU: AF-5487 | Brand: Adafruit

These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of light to a design without needing SMT-level soldering skills. Use ...

SKU: AF-1756 | Brand: Adafruit

Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making t...

SKU: SF-DEV-13903 | Brand: SparkFun

This is the LilyPad Rainbow LED strip, with seven LilyPad LEDs that are still attached to one another, letting you snap LEDs apart at your leisure to sew into clothing or whatever else you can dream up.The LilyPad Rai...

SKU: LB-24-2-LED | Brand: Little Bird

Check out our tutorial here There are three pins:Signal: This pin is a signal pin, and can be used to emit a green lightMiddle Pin : This pin is another signal pin, and can be used to emit a red lightGND: Though it ...

SKU: AF-1476 | Brand: Adafruit

A 16mm illuminated pushbutton with a built-in blue LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired i...

SKU: AF-2343 | Brand: Adafruit

These APA102C (DotStar) RGB LEDs feature an integrated driver chip inside each 5050 SMD package, giving you individually addressable 24-bit colour control (8 bits each for red, green, and blue). The same smart LED use...

SKU: SF-COM-08862 | Brand: SparkFun

Huge 10mm through-hole LEDs. Mood light an entire wall! Features: 625-630nm Red 2.1-2.3VDC Forward Voltage 80mA Forward Current 30 degree viewing angle 10,000-12,000 MCD output Documents: Datasheet LED Tutorial

SKU: SF-DEV-14013 | Brand: SparkFun

A pack of five red LilyPad LEDs on a snap-apart strip. Each LED has large sew tabs for stitching into fabric with conductive thread, making them ideal for wearable electronics and e-textile projects. The ultra-thin 0....

SKU: SF-COM-10634 | Brand: SparkFun

Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft, diffuse glow.

SKU: LB-LS7756 | Brand: Little Bird

Packing list: 10 × White LEDs10 × Yellow LEDs10 × Blue LEDs10 × Green LEDs10 × Red LEDs1 × RGB LED2 × Photoresistors (LDR)1 × Thermistor5 × Rectifier Diodes (1N4007)5 × NPN Transistors (PN2222)1 × Optocoupler IC ...

SKU: AF-4684 | Brand: Adafruit

These incredibly small surface-mount LEDs are an easy way to add a lot of very tiny (but bright!) colorful dots to your project. They are just mind-bogglingly small - 2mm square. As they are pretty darn tiny, the...

SKU: LB-LR0038 | Brand: Little Bird

This 3W high-power LED module delivers bright, warm white illumination with a luminous output of 180–200 lumens. With a wide 180° viewing angle and a forward voltage of just 3.3–3.6V, it's suitable for lighting projec...

SKU: SF-COM-08662 | Brand: SparkFun

This is a simple 5mm LED with an interesting array of applications. This UV LED can be used for counterfeit detection (bills, credit cards, documents, etc), sterilization, pesticide, black lights, sun burns, the list ...

SKU: SF-DEV-14011 | Brand: SparkFun

This is a simple pack of five Green LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.LilyPad is a wearable e-t...

SKU: SF-COM-11449 | Brand: SparkFun

These color-changing LEDs take the work out of creating crazy, flashy, blinky… ness. Simply apply power and the LED will cycle through the RGB colorspace: no external controller necessary! These bright and festive LED...

SKU: SF-COM-10820 | Brand: SparkFun

Ever hear of a thing called RGB? Red, Green, Blue? How about an RGB LED? These 5mm units have four pins: one for each color and a common anode. Use this one LED for three status indicators or pulse width modulate all ...

SKU: SF-COM-10633 | Brand: SparkFun

A large 10 mm through-hole LED with a diffused green glow. The opaque epoxy package produces a soft, even light output that's easy to see from wide viewing angles — perfect for indicators, prototyping, and decorative ...

SKU: SF-COM-12877 | Brand: SparkFun

We know this looks like a lot of our other LEDs, but it’s not! This is a PTH Addressable RGB LED with a WS2812 control IC built right into the LED. This PTH version is incredibly similar to its SMD cousin, except it i...

SKU: LB-RED-100 | Brand: Little Bird

A bulk pack of 100 red 5mm through-hole LEDs. These standard LEDs are ideal for power indicators, status lights, and general-purpose projects. Key Features 5mm Diameter – Standard size for breadboards and PCBs Red...