Headers & Connectors

SKU: DF-FIT0898 | Brand: DFRobot

This pack gives you 10 handy 30cm Gravity sensor cables for connecting 4-pin PH2.0 modules to breadboards, IO boards or standard DuPont-style headers.Each cable has a 4-pin PH2.0 plug connector on one end and DuPont m...

SKU: DF-FIT0916-F | Brand: DFRobot

These labelled jumper cables are designed to make Gravity project wiring easier to follow, especially when a build has several similar connections. Each cable carries I2C/UART pin labels so you can identify power, gro...

SKU: DF-FIT0902 | Brand: DFRobot

This 3-pin PH2.0 male-to-male cable pack provides compact, tidy connections for modular electronics builds. It is designed for use with Boson modules and the UNIHIKER development board, helping you connect sensors, pe...

SKU: DF-FIT0894 | Brand: DFRobot

This push-in wire connector turns a single input connection into six output connections, making it a handy power distribution tool for low-voltage DC wiring.The push-in wiring method makes connections quick and conven...

SKU: SF-PRT-17907 | Brand: SparkFun

This header kit gives you the solderable pins needed to connect a Raspberry Pi Pico to a breadboard or another circuit. It includes the matching header set for the Pico layout, making it a straightforward option for p...

SKU: SF-PRT-29327 | Brand: SparkFun

Build a neater, sturdier Raspberry Pi stack with this hardware kit for mounting a standard Pi HAT. It is designed for Raspberry Pi 3, 4 and 5 boards, including builds where a larger cooling fan or heat sink needs extr...

SKU: SF-CAB-30513 | Brand: SparkFun

This machine interface cable is made for connecting SparkPNT FP hardware to your own power and data wiring. It provides a secure cable link for integrations where you need to route connections into custom hardware, te...

SKU: SF-PRT-21329 | Brand: SparkFun

This pluggable terminal block socket is made for secure, removable wire-to-board connections in power and I/O wiring. The 10-way layout uses a 3.5mm pitch, giving you a compact connector for multi-wire harnesses.Each ...

SKU: SF-CAB-23353 | Brand: SparkFun

This handy cable connects a six pin GHR-06V type locking connector to breadboard-friendly male pins, making it easier to prototype with compact modules.The 1.25mm pitch GHR-06V locking JST connector is commonly found ...

SKU: SF-CAB-17854 | Brand: SparkFun

Securely link compatible modules with this short adapter cable, fitted with a 4-pin locking JST-GHR connector on one end and a 6-pin locking JST-GHR connector on the other.Both connectors use a 1.25 mm pitch and are s...

SKU: SF-CAB-19289 | Brand: SparkFun

This simple adapter cable makes it easy to connect between 3-pin JST and 3-pin Molex connectors in your electronics project.It has a 3-pin Molex connector on one end and a 3-pin JST connector on the other, both with 0...

SKU: SF-CAB-29458 | Brand: SparkFun

This IDC ribbon cable is a handy interconnect for compact electronics projects that use a 2mm pitch, 2x3-pin layout. At 120mm long, it is suited to short board-to-board runs inside enclosures or between nearby modules...

SKU: SF-COM-21409 | Brand: SparkFun

This female header provides 12 positions on a standard 0.1 inch pitch, making it suitable for compact board-to-board connections and prototyping layouts.It is designed for surface-mount applications where through-hole...

SKU: SF-PRT-29360 | Brand: SparkFun

This hookup cable provides a simple way to connect to a RockBLOCK 9704 module. It has a 2x8 C-Grid III female connector on one end and unterminated bare wires on the other.The 300mm length is suited to making your own...

SKU: SF-PRT-28008 | Brand: SparkFun

This header set gives you the female headers needed to populate the prototyping area on an Alchitry Br Wide V2 Board. It includes four 2x14 headers and two 2x6 headers, all with 0.1"-spaced pins.The headers line up wi...

SKU: SF-WRL-21225 | Brand: SparkFun

This compact RF adapter has standard-polarity male SMA connectors on both ends, making it useful when you need to change a female SMA connection into a male one.It can be screwed onto the female end of an SMA female-t...

SKU: SF-WRL-23187 | Brand: SparkFun

This PCB edge-mount SMA RF connector is made for adding an antenna connection directly to your circuit board. It is a handy choice for prototyping wireless designs that need a standard SMA antenna interface.The connec...

SKU: SF-WRL-30232 | Brand: SparkFun

This RP-SMA connector is designed for edge-mounting onto a PCB, making it handy for RF prototyping and compact antenna connections.It is suited to GPS and cellular projects that need an external antenna connection bro...

SKU: SF-PRT-11641 | Brand: SparkFun

This compact two-pin connector is designed for surface-mount PCB layouts where you need a low-profile, right-angle connection. Its small footprint makes it well suited to tight electronics builds and embedded projects...

SKU: SF-DD-18616 | Brand: SparkFun

This handy adapter cable connects a five-pin GHR-05V type locking JST connector to breadboard-friendly male pins, making it easier to prototype with small modules that use compact locking connectors.The 1.25mm pitch G...