Headers & Connectors

SKU: PL-1921 | Brand: Pololu

These 2×12-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable 24-wire conn...

SKU: PL-1915 | Brand: Pololu

These 2×7-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable fourteen-wire...

SKU: AF-3342 | Brand: Adafruit

This 2×40 right-angle edge connector fits directly onto the bottom edge contacts of the BBC micro:bit, providing access to all GPIO pins, power, and ground connections. The right-angle design is ideal for mounting on ...

SKU: SF-PRT-12791 | Brand: SparkFun

This is a 2x23 pin male PTH header. This piece is in the common configuration for Beaglebone Black headers that can be broken apart to form smaller header formations. Each pin has a spacing of 0.1" in between each oth...

SKU: AF-1992 | Brand: Adafruit

Connect your own PCB to a Raspberry Pi B+ with this extra-tall female header. The female header part has extra spaces to make it 16.5mm tall: when placed on your Pi, a PCB will clear the Ethernet and USB ...

SKU: PL-1023 | Brand: Pololu

A 2×3-pin (6-pin) female header with standard 0.1" (2.54mm) spacing. This compact dual-row header is commonly used for ISP programming connections, small sensor breakouts, and custom cable assemblies. The 2×3 configu...

SKU: LB-LS3507 | Brand: Little Bird

This 2×20 pin tall female header extends the reach of any board with a standard 40-pin GPIO layout, including the Raspberry Pi, Google Coral, and NVIDIA Jetson. At 16 mm tall with standard 0.1″ (2.54 mm) spacing, it p...

SKU: PR-PIM247 | Brand: Little Bird

If you're going to be adding and removing wires to a project, these 2.54 pitch headers are an ideal way to make it easy and reliable. This box has a useful selection. Maker Essentials are components and useful bits...

SKU: PR-PIM296 | Brand: Little Bird

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT. If your soldering isn't quite up to scratch, or you just...

SKU: PL-966 | Brand: Pololu

This double-row, 80-pin (2×40) straight male header strip with 0.1" (2.54mm) pitch is a versatile connector for electronics projects. The breakaway design lets you snap or cut it into any dual-row length you need. St...

SKU: AF-2243 | Brand: Adafruit

A short-profile 2×20 female through-hole header for connecting Raspberry Pi HATs with minimal height above the board. This custom header provides a slimmer fit than standard-height GPIO headers, ideal for compact encl...

SKU: PL-1024 | Brand: Pololu

The 0.100″ (2.54 mm) 2×4-Pin Straight Female Header is a double-row, 8-pin socket strip designed to mate with standard 0.1″ pitch male headers. Its compact dual-row footprint is commonly used for small bus connections...

SKU: TB-PS0989 | Brand: Little Bird

A 40-way IDC (insulation displacement connection) line socket for use with standard pitch ribbon cable. Crimps directly onto flat ribbon cable without soldering, providing a quick and reliable connection for multi-pin...

SKU: AF-2270 | Brand: Adafruit

The "poor woman's" Raspberry Pi A+ / B+ / Pi 2 cobbler! This combo of 2x20 pin (0.1 spaced) header and socket is for our popular GPIO Ribbon Cable for Raspberry Pi Model A+/B+/Pi 2 (40 pins).  It comes in...

SKU: SF-PRT-13156 | Brand: SparkFun

This is a simple 2x8 male PTH header. This header is that you will find commonly used to interface with a basic 8x2 character LCDs. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet

SKU: PL-972 | Brand: Pololu

A 300mm (12″) 6-conductor ribbon cable with female 2×3 IDC connectors on each end. Designed to plug into standard 0.1″ (2.54mm) 2×3 shrouded box headers, and also compatible with 0.1″ male header pins. Key Features ...

SKU: PL-855 | Brand: Pololu

A 2×3-pin (6-pin) IDC socket with strain relief clip, designed for use with standard 2×3-pin shrouded male headers. Crimps onto flat ribbon cable for quick, solderless connections. Commonly used for AVR ISP programmin...

SKU: PI-COM1104 | Brand: Pimoroni

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT.If your soldering isn't quite up to scratch, or you just don...

SKU: PI-COM0001 | Brand: Pimoroni

This 2×20 pin female GPIO header with 3 mm pins is designed for Raspberry Pi boards with 40-pin GPIO headers. The short pin height keeps a low profile while still allowing access to the GPIO pins when used with pHAT o...

SKU: TB-PP1150 | Brand: Little Bird

A right-angle 10-pin IDC box header for PCB mounting, with a locking mechanism to secure ribbon cable connections. The 2.54mm (0.1") pitch double-row header features gold-plated pins and solder-tag attachment. Specif...