Headers & Connectors

SKU: AF-3173 | Brand: Adafruit

A simple, solder-on terminal block set sized to fit Adafruit Feather boards and FeatherWings. These 0.1″ pitch terminal blocks let you make secure, screw-down wire connections without soldering wires directly to your ...

SKU: AF-3342 | Brand: Adafruit

This 2×40 right-angle edge connector fits directly onto the bottom edge contacts of the BBC micro:bit, providing access to all GPIO pins, power, and ground connections. The right-angle design is ideal for mounting on ...

SKU: SF-PRT-12791 | Brand: SparkFun

This is a 2x23 pin male PTH header. This piece is in the common configuration for Beaglebone Black headers that can be broken apart to form smaller header formations. Each pin has a spacing of 0.1" in between each oth...

SKU: SF-PRT-10364 | Brand: SparkFun

This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway header...

SKU: SF-PRT-10369 | Brand: SparkFun

A 6" (15 cm) four-wire jumper cable with 4-pin JST RE connectors on both ends, designed for board-to-board connections on standard 0.1" (2.54 mm) pitch headers. Specifications Wires – 4 Connector – 4-pin JST RE on...

SKU: SF-PRT-10368 | Brand: SparkFun

A simple 3-pin jumper wire with JST RE connectors on both ends, designed for standard 0.1" (2.54 mm) breakaway headers. Ideal for board-to-board connections, sensor hookups, and general prototyping. Specifications ...

SKU: SF-PRT-10367 | Brand: SparkFun

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers...

SKU: SF-PRT-10362 | Brand: SparkFun

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway head...

SKU: SF-PRT-12638 | Brand: SparkFun

A 4-pin right-angle male header for surface-mount applications, with standard 0.1" (2.54 mm) pin spacing. Key Features 4-Pin Male Header – Right-angle, surface mount 0.1" (2.54 mm) Pitch – Standard spacing between...

SKU: AF-1992 | Brand: Adafruit

Connect your own PCB to a Raspberry Pi B+ with this extra-tall female header. The female header part has extra spaces to make it 16.5mm tall: when placed on your Pi, a PCB will clear the Ethernet and USB ...

SKU: SF-PRT-09387 | Brand: SparkFun

A pack of 10 premium male-to-male jumper wires, 12" (30cm) long. Compatible with breadboards, Arduino headers, and any 0.1" (2.54mm) pitch prototyping board. Assorted colours for easy circuit identification. Specific...

SKU: SF-PRT-09388 | Brand: SparkFun

This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to male. Use these to jumper from any female header on any board. Multiple jumpers can be connected next to one another on a 0.1...

SKU: SF-PRT-09389 | Brand: SparkFun

Premium female-to-female jumper wires for connecting between male headers on breadboards, Arduinos, Raspberry Pis, and other 0.1″ (2.54 mm) pitch prototyping boards. Each wire is 30 cm (12″) long, providing plenty of ...

SKU: SF-PRT-09386 | Brand: SparkFun

This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0...

SKU: SF-BOB-16998 | Brand: SparkFun

Add a reversible USB-C connector to your project without hand-soldering the tiny SMD pads. This horizontal breakout makes it easier to bring USB-C power and data connections onto a prototype or custom build.The board ...

SKU: SF-BOB-29195 | Brand: SparkFun

This compact breakout board makes it easy to work with a male DE9 connector, commonly referred to as DB9. It brings the connector out to a maker-friendly plated through-hole header, so you can wire it into prototypes,...

SKU: SF-BOB-29196 | Brand: SparkFun

This compact breakout board makes it easy to bring a female DE9 connector, often called DB9, onto a breadboard or into a custom wiring harness.All nine connector pins are broken out to 0.1in-spaced plated through-hole...

SKU: SF-BOB-17110 | Brand: SparkFun

USB-C is handy for modern projects, but its 24 tiny, tightly spaced pins are not friendly to hand soldering or quick prototyping. This breakout board routes the essential USB-C connections out to a standard 0.1" (2.54...

SKU: AF-6495 | Brand: Adafruit

This BFF add-on makes it much easier to wire up small QT Py and Xiao projects without juggling loose jumpers. Plug in a compatible board and each pin is brought out to a screw-terminal block, with an extra socket pin ...

SKU: DF-FIT0898 | Brand: DFRobot

This pack gives you 10 handy 30cm Gravity sensor cables for connecting 4-pin PH2.0 modules to breadboards, IO boards or standard DuPont-style headers.Each cable has a 4-pin PH2.0 plug connector on one end and DuPont m...