Headers & Connectors

SKU: AF-3907 | Brand: Adafruit

A colour-coded 2×20 pin header for the Raspberry Pi Zero and Zero W that makes it easy to identify pin functions at a glance. Each pin group is colour-coded so you can quickly find power, ground, and GPIO pins without...

SKU: PI-COM0004 | Brand: Pimoroni

This extra-tall 2×20 female header is designed to connect custom PCBs and HATs to the Raspberry Pi GPIO pins. At 16.5 mm tall, it provides enough clearance for your board to sit above the Ethernet and USB jacks withou...

SKU: AF-2138 | Brand: Adafruit

A compact 2-pin screw terminal block with 2.54mm (0.1") pitch, designed to fit directly into perfboard and protoboards. Terminal blocks provide reliable, tool-adjustable PCB-to-wire connections that are easy to mainta...

SKU: AF-1993 | Brand: Adafruit

This 2×20 (40-pin) IDC box header is the matching connector for 40-pin GPIO ribbon cables used with Raspberry Pi models that have a 40-pin GPIO header. Solder it onto perfboard to create a breakout point for your Pi's...

SKU: AF-2429 | Brand: Adafruit

Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also i...

SKU: SF-PRT-09279 | Brand: SparkFun

This is a 8-pin female header, with extra long legs – great for stacking Arduino shields. Pins are spaced by 0.1". Documents: Datasheet

SKU: SF-PRT-09015 | Brand: SparkFun

A surface-mount 6-pin right-angle male header with standard 2.54 mm (0.1 in) pitch between pins and between rows. Ideal for adding a programming or serial header to compact PCB designs where a low-profile, right-angle...

SKU: AF-2823 | Brand: Adafruit

This 2×20-pin right-angle female header with 0.1" (2.54mm) pitch provides a convenient way to add right-angle connectivity to circuit boards with dual-row 40-pin headers. It mates with standard 2×20 dual male headers ...

SKU: SF-BOB-12035 | Brand: SparkFun

Add a Micro-B USB connector to your project without the hassle of soldering tiny SMD pads. This compact breakout board routes all five pins — VCC, GND, ID, D−, and D+ — to a standard 0.1" pitch header for easy breadbo...

SKU: SF-PRT-07939 | Brand: SparkFun

A 14-pin DIP IC socket with solder-tail pins and 300 mil (0.3″) row spacing. Solder these into your PCB or perfboard to make DIP ICs easily removable — saving you from desoldering when swapping or replacing chips. Sp...

SKU: AF-3009 | Brand: Adafruit

Short break-away male headers in a convenient pack of ten — ideal for low-profile connections where standard-height male headers would be too tall. These headers are designed to pair with short female headers for a sl...

SKU: AF-3143 | Brand: Adafruit

A pack of small dual-row connector housings for building custom jumper cable harnesses. Compatible with standard 0.1" pitch raw jumper wire crimp pins — snap in your crimped wires and create exactly the connector conf...

SKU: PL-1015 | Brand: Pololu

This single-row, 5-pin straight female header with 0.1" (2.54mm) pitch is designed to mate with standard 0.1" male headers. It provides a reliable socket connection for board-to-board and board-to-wire applications. ...

SKU: PL-1907 | Brand: Pololu

These 1×8-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable eight-wire co...

SKU: PL-1905 | Brand: Pololu

These 1×6-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable six-wire conn...

SKU: SF-COM-10095 | Brand: SparkFun

Here we have some right-angle headers with 40x3 pins. They are break away and will take a bit of effort to break this beast where you need it to break. That being said, if you need a big header like this, it’s easy...

SKU: AF-816 | Brand: Adafruit

These right-angle male headers feature a 3-row configuration at standard 0.1" (2.54mm) pitch, making them ideal for connecting three-wire cables such as sensor and servo leads. Each piece is a 3×4 block, and four piec...

SKU: SF-PRT-08431 | Brand: SparkFun

This is a SparkFun exclusive! These are 155mm long jumpers with male connectors on both ends. Use these to jumper from any female header on any board, to any other female header. Combine these with our female to femal...

SKU: LB-LS5179-5 | Brand: Little Bird

A pack of ten 5-pin PCB screw terminal blocks with a 2.54mm (0.1") pitch — the same spacing as standard breadboard headers. Strip a wire, insert it into the terminal, and tighten the screw for a secure, solderless ele...

SKU: AF-5360 | Brand: Adafruit

A magnetic pogo pin connector set with three 0.1" (2.54mm) spaced contact pins in a right-angle configuration. The two halves snap together via embedded magnets, ensuring all three pogo pins make reliable contact. If ...