Headers & Connectors

SKU: LB-LS7756 | Brand: Little Bird

Packing list: 10 × White LEDs10 × Yellow LEDs10 × Blue LEDs10 × Green LEDs10 × Red LEDs1 × RGB LED2 × Photoresistors (LDR)1 × Thermistor5 × Rectifier Diodes (1N4007)5 × NPN Transistors (PN2222)1 × Optocoupler IC ...

SKU: AF-3907 | Brand: Adafruit

A colour-coded 2×20 pin header for the Raspberry Pi Zero and Zero W that makes it easy to identify pin functions at a glance. Each pin group is colour-coded so you can quickly find power, ground, and GPIO pins without...

SKU: PI-COM0004 | Brand: Pimoroni

This extra-tall 2×20 female header is designed to connect custom PCBs and HATs to the Raspberry Pi GPIO pins. At 16.5 mm tall, it provides enough clearance for your board to sit above the Ethernet and USB jacks withou...

SKU: AF-1993 | Brand: Adafruit

This 2×20 (40-pin) IDC box header is the matching connector for 40-pin GPIO ribbon cables used with Raspberry Pi models that have a 40-pin GPIO header. Solder it onto perfboard to create a breakout point for your Pi's...

SKU: AF-2823 | Brand: Adafruit

This 2×20-pin right-angle female header with 0.1" (2.54mm) pitch provides a convenient way to add right-angle connectivity to circuit boards with dual-row 40-pin headers. It mates with standard 2×20 dual male headers ...

SKU: AF-4437 | Brand: Adafruit

This one's going out to all the makers and designers who use DIN railing in their builds. This adapter plate is perfect for simplifying complex wiring. You connect a 2x20 IDC cable to this very PCB, which ca...

SKU: PI-COM1105 | Brand: Pimoroni

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT. If your soldering isn't quite up to scratch, or you just...

SKU: DF-FIT0100 | Brand: DFRobot

A pack of 10 right-angle male header strips, each with 40 breakable pins at 2.54mm pitch. The 90° bend allows horizontal connections from vertically mounted PCBs, ideal for compact enclosures and edge-mounted connecto...

SKU: DF-FIT0105 | Brand: DFRobot

A pack of 10 long straight male header strips, each with 40 breakable pins at 2.54mm pitch. The extended 10mm pin length allows socket-to-socket connections, and the plastic separator can be repositioned along the pin...

SKU: DF-FIT0084-G | Brand: DFRobot

A pack of 10 green straight male pin header strips, each with 40 pins at standard 2.54 mm (0.1") spacing. These single-row headers are compatible with solderless breadboards, perforated prototyping PCBs, female header...

SKU: SF-PRT-10158 | Brand: SparkFun

These are a longer version of our standard break away headers. They are 20mm long which allows you use them socket to socket. The plastic separator can be slid up or down to accommodate your needs. You will ge...

SKU: AF-3413 | Brand: Adafruit

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need. They come in both male and female, and use crafty ...

SKU: SF-PRT-16764 | Brand: SparkFun

This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi, Google Coral, and NVIDIA Jetson. You can also solder it to Pi HATs th...

SKU: AF-4079 | Brand: Adafruit

This 2×20 female socket riser header features slightly longer-than-standard pins, adding extra height between your Raspberry Pi and any HAT, Bonnet, or pHAT mounted on top. This additional clearance helps boards clear...

SKU: AF-2714 | Brand: Adafruit

An extra-tall 2×20 SMT (surface-mount) female header designed for Raspberry Pi HATs. The increased height provides additional clearance for stacking multiple HATs or accommodating taller components on the Pi, such as ...

SKU: SF-PRT-13054 | Brand: SparkFun

A 2×20 shrouded (boxed) header designed to match the Raspberry Pi GPIO pinout. It provides a keyed, polarised connection point so you can run a ribbon cable from your Pi's GPIO to a breakout board, HAT prototype, or c...

SKU: AF-4909 | Brand: Adafruit

A 40-pin FPC to right-angle 2×20 IDC female socket header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a Raspberry Pi-compatible GPIO socket, allowing you to extend or relocate y...

SKU: AF-4897 | Brand: Adafruit

A 40-pin FPC to right-angle 2×20 IDC male plug header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a male GPIO plug, allowing you to connect HATs and Bonnets at a distance from y...

SKU: AF-2207 | Brand: Adafruit

These 40-pin IC sockets let you insert and remove DIP chips without soldering them directly to your PCB. Solder the socket into your board once, then swap chips freely — useful for prototyping, testing, or any project...

SKU: AF-3663 | Brand: Adafruit

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need.  Absolutely no soldering required! All t...