Headers & Connectors

SKU: AF-816 | Brand: Adafruit

These right-angle male headers feature a 3-row configuration at standard 0.1" (2.54mm) pitch, making them ideal for connecting three-wire cables such as sensor and servo leads. Each piece is a 3×4 block, and four piec...

SKU: AF-5413 | Brand: Adafruit

If you love power adapters or toys & gadgets that have magnetic connections, you can now experiment with these futuristic connectors easily. It's sorta like a DIY "MagSafe-styled" connector, with five 0.1" spaced...

SKU: AF-5360 | Brand: Adafruit

A magnetic pogo pin connector set with three 0.1" (2.54mm) spaced contact pins in a right-angle configuration. The two halves snap together via embedded magnets, ensuring all three pogo pins make reliable contact. If ...

SKU: AF-4390 | Brand: Adafruit

Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of our favorite 2mm pitch connector - the JST PH 4 pin. These are the vertical style.You can use these with any of ...

SKU: AF-4423 | Brand: Adafruit

Totaling 560 pieces, this JST-XH Connector Kit is a must-have for your workstation. You'll have enough sockets and headers to fuel your maker tendencies for days on end!These connectors are really ...

SKU: AF-4437 | Brand: Adafruit

This one's going out to all the makers and designers who use DIN railing in their builds. This adapter plate is perfect for simplifying complex wiring. You connect a 2x20 IDC cable to this very PCB, which ca...

SKU: AF-4434 | Brand: Adafruit

If you have any LEGO Mindstorm or EV3 sensors/motors/controllers you probably noticed the phone-cable-like connectors that are used to go from accessories to controller boards. However, you can't use every-day phone j...

SKU: AF-4208 | Brand: Adafruit

A 10-pack of JST SH 4-pin right-angle connectors with 1 mm pitch through-hole mounting tabs. These are the standard connectors used with the Qwiic and STEMMA QT ecosystems, making it easy to add I2C connectivity to yo...

SKU: SF-PRT-15187 | Brand: SparkFun

These stackable headers are made to work with the SparkFun ESP32 Thing Plus to connect to shield with a Feather footprint. This set includes one 12-pin and one 16-pin header; the pins are spaced by 0.1".Each set of he...

SKU: AF-2141 | Brand: Adafruit

A compact 8-pin screw terminal block with 2.54mm (0.1") pitch, designed to fit directly into perfboard and protoboards. Terminal blocks provide reliable, tool-adjustable PCB-to-wire connections that are easy to mainta...

SKU: PI-COM0804 | Brand: Pimoroni

A small adapter board that solders onto the back of micro metal gearmotors, adding a male 0.1″ push header for tool-free connections. Once attached, the motor can be plugged directly into breadboards or female headers...

SKU: PI-COM1105 | Brand: Pimoroni

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT. If your soldering isn't quite up to scratch, or you just...

SKU: AF-2137 | Brand: Adafruit

A compact 4-pin screw terminal block with 2.54mm (0.1") pitch, designed to fit directly into perfboard and protoboards. Terminal blocks provide reliable, tool-adjustable PCB-to-wire connections that are easy to mainta...

SKU: AF-2135 | Brand: Adafruit

A compact 6-pin screw terminal block with 2.54mm (0.1") pitch, designed to fit directly into perfboard and protoboards. Terminal blocks provide reliable, tool-adjustable PCB-to-wire connections that are easy to mainta...

SKU: DF-FIT0030 | Brand: DFRobot

These 23 cm (9″) female-to-female jumper wires are a prototyping essential. Use them to connect between male headers on Arduino boards, IO shields, sensors, and breadboards. Multiple wires sit neatly side by side on s...

SKU: DF-FIT0100 | Brand: DFRobot

A pack of 10 right-angle male header strips, each with 40 breakable pins at 2.54mm pitch. The 90° bend allows horizontal connections from vertically mounted PCBs, ideal for compact enclosures and edge-mounted connecto...

SKU: DF-FIT0105 | Brand: DFRobot

A pack of 10 long straight male header strips, each with 40 breakable pins at 2.54mm pitch. The extended 10mm pin length allows socket-to-socket connections, and the plastic separator can be repositioned along the pin...

SKU: DF-FIT0084-G | Brand: DFRobot

A pack of 10 green straight male pin header strips, each with 40 pins at standard 2.54 mm (0.1") spacing. These single-row headers are compatible with solderless breadboards, perforated prototyping PCBs, female header...

SKU: AF-2790 | Brand: Adafruit

A 3.5 mm (1/8") stereo (TRS) audio plug with screw terminal connections — no soldering required. Use stranded or solid-core wire and a small screwdriver to create custom audio cables, breakouts, and test leads. This ...

SKU: SF-PRT-07938 | Brand: SparkFun

A 16-pin DIP IC socket with solder-tail pins and 0.3" (300 mil) row spacing. Solder the socket to your PCB and swap ICs without desoldering — essential for prototyping and development work. Specifications Pin Count...