Headers & Connectors
Pin headers, socket headers, connectors, and terminal blocks for electronics prototyping and PCB assembly.
0.100 (2.54 mm) Female Header: 1x8-Pin, Straight
SKU: PL-1018 | Brand: Pololu
The 0.100″ (2.54 mm) 1×8-Pin Straight Female Header provides a reliable vertical connection point for standard 0.1″ pitch male headers. This single-row socket strip is one of the most common connectors used in electro...
Out of stock
6-Conductor Ribbon Cable with IDC Connectors 12
SKU: PL-972 | Brand: Pololu
A 300mm (12″) 6-conductor ribbon cable with female 2×3 IDC connectors on each end. Designed to plug into standard 0.1″ (2.54mm) 2×3 shrouded box headers, and also compatible with 0.1″ male header pins. Key Features ...
Out of stock
IDC socket: 2x3-Pin, 0.100 (2.54 mm) Female
SKU: PL-855 | Brand: Pololu
A 2×3-pin (6-pin) IDC socket with strain relief clip, designed for use with standard 2×3-pin shrouded male headers. Crimps onto flat ribbon cable for quick, solderless connections. Commonly used for AVR ISP programmin...
Out of stock
0.1 (2.54MM) CRIMP CONNECTOR HOUSING: 1X1-PIN SINGLE UNIT
SKU: LB-00051 | Brand: Little Bird
This single-pin crimp connector housing lets you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair it with pre-crimped terminal wires or crimp pins to create reliable, removable...
Out of stock
Female Headers
SKU: PI-COM1108 | Brand: Pimoroni
A single row of 40 female headers which can easily be cut down to any size you need! These headers can be cut to size with a pair of wire-cutters, though you will probably lose one pin with each cut.They mate very ...
Out of stock
2x20 pin Female GPIO Header for Raspberry Pi 3/2/B+/A+ - 3mm
SKU: PI-COM0001 | Brand: Pimoroni
This 2×20 pin female GPIO header with 3 mm pins is designed for Raspberry Pi boards with 40-pin GPIO headers. The short pin height keeps a low profile while still allowing access to the GPIO pins when used with pHAT o...
Out of stock
Socket, 14 pins, 0.1 inch (2.54 mm) spacing
SKU: PJ-SOCKET_14X1 | Brand: Little Bird
A standard 14-pin DIP IC socket with 0.1" (2.54mm) pin spacing. Use it to mount 14-pin DIP integrated circuits on your PCB or breadboard, allowing easy chip insertion and removal without soldering the IC directly. Ke...
Out of stock
Polarized Connectors - Housing (3-Pin)
SKU: SF-PRT-08096 | Brand: SparkFun
Polarized connectors and headers for your perf board/PCB projects. Use these connectors for power connections or any sensor/general connection to prevent users from connecting the peripheral incorrectly or reversed. ...
Out of stock
0.100 (2.54 mm) Shorting Block: Blue, Top Closed
SKU: PL-968 | Brand: Pololu
The 0.100″ (2.54 mm) Shorting Block is a removable jumper with a closed-top blue housing, designed to bridge two adjacent pins on a standard 0.1″ pitch male header. Shorting blocks are essential for configuring hardwa...
Out of stock
