Headers & Connectors

SKU: SF-PRT-10898 | Brand: SparkFun

A pack of 100 premium female-to-female jumper wires, 155 mm long. Use these to connect any male header to another male header on breadboards, development boards, and breakout modules. Multiple jumpers can be installed...

SKU: EC-TET01980T | Brand: Elecrow

A comprehensive collection of 24 types of commonly used Arduino connectors, all in one convenient kit. Includes male and female headers, USB connectors, switches, DC jacks, SD/TF card sockets, and more — everything yo...

SKU: PI-COM0004 | Brand: Pimoroni

This extra-tall 2×20 female header is designed to connect custom PCBs and HATs to the Raspberry Pi GPIO pins. At 16.5 mm tall, it provides enough clearance for your board to sit above the Ethernet and USB jacks withou...

SKU: AF-1993 | Brand: Adafruit

This 2×20 (40-pin) IDC box header is the matching connector for 40-pin GPIO ribbon cables used with Raspberry Pi models that have a 40-pin GPIO header. Solder it onto perfboard to create a breakout point for your Pi's...

SKU: SF-PRT-09279 | Brand: SparkFun

This is a 8-pin female header, with extra long legs – great for stacking Arduino shields. Pins are spaced by 0.1". Documents: Datasheet

SKU: SF-PRT-09044 | Brand: SparkFun

A standard 2-pin jumper shunt used to create an electrical connection between two adjacent pin headers. Commonly used to configure settings on development boards, select operating modes, or bridge header pins on PCBs....

SKU: AF-2823 | Brand: Adafruit

This 2×20-pin right-angle female header with 0.1" (2.54mm) pitch provides a convenient way to add right-angle connectivity to circuit boards with dual-row 40-pin headers. It mates with standard 2×20 dual male headers ...

SKU: AF-3144 | Brand: Adafruit

Are you frustrated by the lack of customization options for your jumper wires? Look no further! Compatible with both male and female wires, these fully customizable wire housings bring DIY to a new level, giving yo...

SKU: PL-1015 | Brand: Pololu

This single-row, 5-pin straight female header with 0.1" (2.54mm) pitch is designed to mate with standard 0.1" male headers. It provides a reliable socket connection for board-to-board and board-to-wire applications. ...

SKU: SF-PRT-15187 | Brand: SparkFun

These stackable headers are made to work with the SparkFun ESP32 Thing Plus to connect to shield with a Feather footprint. This set includes one 12-pin and one 16-pin header; the pins are spaced by 0.1".Each set of he...

SKU: PI-COM1105 | Brand: Pimoroni

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT. If your soldering isn't quite up to scratch, or you just...

SKU: DF-FIT0030 | Brand: DFRobot

These 23 cm (9″) female-to-female jumper wires are a prototyping essential. Use them to connect between male headers on Arduino boards, IO shields, sensors, and breadboards. Multiple wires sit neatly side by side on s...

SKU: SF-PRT-00743 | Brand: SparkFun

Single row of 30-holes, female header with swiss round machined pins. These units have very high quality round pins to accept and retain machine pin headers much better. Can be cut to size with a pair of wire-cutters....

SKU: AF-3008 | Brand: Adafruit

Short female headers designed for tight spaces where standard-height headers won't fit. At just 5mm tall (compared to the standard 8mm), these low-profile headers are ideal for compact builds and slim assemblies. Eac...

SKU: PL-1028 | Brand: Pololu

The 0.100″ (2.54 mm) 2×8-Pin Straight Female Header is a double-row, 16-pin socket strip designed to mate with standard 0.1″ pitch male headers. The 2×8 layout is a versatile medium-density connector used across a wid...

SKU: AF-3146 | Brand: Adafruit

Create custom wire harnesses with these single-row housings for DIY jumper cables. Compatible with both male and female jumper wires, these housings give you full control over your wiring layout and connector configur...

SKU: PL-1913 | Brand: Pololu

These 2×5-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires or crimp pins to create reliable, removable...

SKU: AF-3413 | Brand: Adafruit

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need. They come in both male and female, and use crafty ...

SKU: AF-5755 | Brand: Adafruit

If you're fancying to connect to the debug port on a Pico WH, or the two ports on a Pico Debug Probe or anything else with a JST SH compatible 3-pin connector, this cable will do the trick. It has a 1mm pitch JST S...

SKU: SF-PRT-16764 | Brand: SparkFun

This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi, Google Coral, and NVIDIA Jetson. You can also solder it to Pi HATs th...